(a) The time constant (τ) of an RC series circuit is calculated by multiplying the resistance (R) and the capacitance (C). In this case, τ = R * C = 1.90 MΩ * 1.50 µF = 2.85 seconds.
(b) The maximum charge (Qmax) that will appear on the capacitor during charging can be determined using the formula Qmax = ε * C, where ε is the electromotive force (voltage) and C is the capacitance. Substituting the given values, Qmax = 12.0 V * 1.50 µF = 18.0 µC.
(c) To determine how long it takes for the charge to build up to 6.58 µC, we can use the formula Q(t) = Qmax * (1 - e^(-t/τ)), where Q(t) is the charge at time t, Qmax is the maximum charge, τ is the time constant, and e is the base of the natural logarithm.
Rearranging the formula to solve for time (t), we get t = -τ * ln(1 - Q(t)/Qmax). Substituting the given values, we have t = -2.85 seconds * ln(1 - 6.58 µC/18.0 µC) ≈ 2.16 seconds.
(a) The time constant of an RC circuit represents the time required for the charge or voltage to change approximately 63.2% of its total change during charging or discharging. It is calculated by multiplying the resistance and capacitance.
(b) The maximum charge that appears on the capacitor during charging is determined by multiplying the voltage (ε) by the capacitance (C). This value represents the maximum amount of charge that can be stored on the capacitor.
(c) The formula for the charge on the capacitor at any given time in an RC circuit involves the maximum charge, the time constant, and the time elapsed. By rearranging the formula, we can solve for time. Substituting the given values allows us to calculate the time required for the charge to reach a specific value.
To learn more about time click here brainly.com/question/33137786
#SPJ11
An undamped 1.92 kg horizontal spring oscillator has a spring constant of 21.4 N/m. While oscillating, it is found to have a speed of 2.56 m/s as it passes through its equilibrium position. What is its amplitude A of oscillation?
The amplitude of oscillation of an undamped 1.92 kg horizontal spring oscillator with a spring constant of 21.4 N/m and a speed of 2.56 m/s as it passes through its equilibrium position is 0.407 meters.
The amplitude of an oscillation is defined as the maximum displacement from the equilibrium position or mean position of the particle or object in oscillation.What is the formula for amplitude?The amplitude A of a particle in oscillation is given by:A = (2KE/mω2)1/2where KE is the kinetic energy of the particle,m is the mass of the particle, andω is the angular frequency of the oscillation.
The angular frequency is defined as the number of radians per second by which the object rotates or oscillates. It is usually represented by the symbol ω.What is the kinetic energy of the particle?The kinetic energy of the particle is given by:KE = 0.5mv2where m is the mass of the particle, andv is the velocity of the particle.
Given data,Mass of the oscillator, m = 1.92 kgSpring constant, k = 21.4 N/mSpeed of the oscillator, v = 2.56 m/sThe formula for the amplitude of oscillation is:A = (2KE/mω2)1/2The formula for the angular frequency of the oscillation is:ω = (k/m)1/2The formula for the kinetic energy of the particle is:KE = 0.5mv2Substitute the given values in the above formulas to get the value of amplitude as follows:
ω = (k/m)1/2
ω = (21.4 N/m ÷ 1.92 kg)1/2ω = 3.27 rad/s
KE = 0.5mv2
KE = 0.5 × 1.92 kg × (2.56 m/s)2
KE = 5.19 J
Now,A = (2KE/mω2)1/2
A = (2 × 5.19 J ÷ 1.92 kg × (3.27 rad/s)2)1/2
A = 0.407 m
Therefore, the amplitude of oscillation is 0.407 meters.
To know more about amplitude:
https://brainly.com/question/9525052
#SPJ11
Spiders may lunostrands of the webs to give enhanced response at troquencies corresponding to the frequencies at which des table prey might strog Ort web has a typical diameter of 0.0020 mm and spidsk has a density of 1300 kg/m To give a resonance at 190 Hz to what tonsion must in sp der adjusta 12 cm long strand of ?
The necessary tension in the 12 cm long strand of spider web to achieve resonance at 190 Hz is approximately 0.119 N.
To calculate the necessary tension in a 12 cm long strand of spider web to achieve resonance at 190 Hz, we can use the formula for the fundamental frequency of a vibrating string:
f = (1/2L) * sqrt(T/μ)
Where f is the frequency, L is the length of the string, T is the tension, and μ is the linear mass density (mass per unit length) of the string.
Given that the strand of spider web has a typical diameter of 0.0020 mm, we can calculate its linear mass density (μ) using the formula:
μ = (π * (d/2)^2 * ρ) / L
Where d is the diameter of the strand and ρ is the density of the spider silk.
Converting the diameter to meters and using the given density of 1300 kg/m³, we can substitute the values into the equation for μ.
Next, we rearrange the equation for the fundamental frequency to solve for the tension T:
T = (f * 2L * sqrt(μ))²
Substituting the values of f (190 Hz) and L (12 cm) into the equation, along with the calculated value of μ, we can solve for T, which represents the tension required to achieve resonance at 190 Hz.
learn more about "tension ":- https://brainly.com/question/24994188
#SPJ11
Problem 2 (10 points) Earth has a radius of 6.38 x 106m. Its mass is 5.98 x 1024 kg. Ignoring the atmosphere, if we fire a projectile from a mountain top fast enough that it will orbit just over the surface of the planet, how fast would you have to fire it for this to happen? If instead you wanted to fire the projectile so that it escapes from Earth's' gravitational pull, what initial velocity would you need?
To achieve a circular orbit just over the surface of the planet, the projectile must have a specific velocity.
Using the equation for circular motion, v² = GM / r, where G is the gravitational constant, M is the mass of the Earth, and r is the radius of the Earth, we can calculate the required velocity.
Substituting the given values into the equation, we have v² = (6.67 x 10^-11 Nm²/kg² x 5.98 x 10^24 kg) / (6.38 x 10^6 m)². Simplifying this expression yields v² = 398600.5 m²/s². Taking the square root of both sides, we find that v ≈ 6301.9 m/s.
Therefore, in order for the projectile to orbit just over the surface of the planet, it needs to be fired with an initial velocity of approximately 6301.9 m/s.
If, on the other hand, we want the projectile to escape from the Earth's gravitational pull, we need to determine the escape velocity. The escape velocity is the speed required for an object to overcome the gravitational force and break free from the planet's gravitational field.
Using the escape velocity formula v = √(2GM / r), where G, M, and r are the same as before, we can calculate the escape velocity. Substituting the values into the equation, we have v = √(2 x 6.67 x 10^-11 Nm²/kg² x 5.98 x 10^24 kg / 6.38 x 10^6 m). Simplifying this expression, we find that v ≈ 11186 m/s.
Hence, to escape from the Earth's gravitational pull, the projectile must be fired with an initial velocity of approximately 11186 m/s.
In summary, to orbit just over the surface of the planet, the projectile needs an initial velocity of 6301.9 m/s, while to escape from the Earth's gravitational pull, it requires an initial velocity of 11186 m/s.
To learn more about the concepts of orbital velocity, escape velocity, you can visit the following link:
brainly.com/question/13842095
#SPJ11
If the coefficient of kinetic friction between an object with mass M = 3.00 kg and a flat surface is 0.400, what magnitude of force F will cause the object to accelerate at 2.10 m/s2?
The force that is required to cause the object with mass M = 3.00 kg to accelerate at 2.10 m/s2 when the coefficient of kinetic friction between the object and a flat surface is 0.400 is given by F.
We can use the formula F = ma, where F is the force, m is the mass of the object and a is the acceleration of the object.
First, let's calculate the force of friction :
a) f = μkN
here f = force of friction ;
μk = coefficient of kinetic friction ;
N = normal force= mg = 3.00 kg x 9.81 m/s² = 29.43 N.
f = 0.400 x 29.43 Nf = 11.77 N
Now we can calculate the force required to accelerate the object:F = maF = 3.00 kg x 2.10 m/s²F = 6.30 N
The magnitude of force F required to cause the object with mass M = 3.00 kg to accelerate at 2.10 m/s2 is 6.30 N.
Learn more about the coffcient of friction :
https://brainly.com/question/14121363
#SPJ11
A proton starts moving from rest in an electric field of magnitude 6.5x105 V/m. The field points in the positive
X-direction, and under the influence of the field, the proton moves 0.25 m in that direction.
a. What is the change in the proton's electric potential as a result of the displacement?
b. What is the change in the proton's electric potential energy due to the displacement?
c. What is the speed of the proton after it has moved 0.25 m, beginning from rest?
The magnitude of electric field that proton is subjected to is 6.5×10^5 V/m. Therefore, electric potential of proton at initial position is E₀ = 0. As proton moves in electric field by a distance d = 0.25 m in the direction of the field, its electric potential changes by an amount ΔV.
Proton, being a charged particle, is subjected to electric field when placed in the vicinity of another charged particle. The electric field exerts force on proton, causing it to move in a certain direction. In this question, proton is placed in an electric field of magnitude 6.5x10^5 V/m that points in positive X-direction. The proton moves 0.25 m in the direction of the field due to the influence of the field.The change in the proton's electric potential as a result of displacement is given by V = E x d, where V is change in the electric potential energy of proton, E is the electric field, and d is the displacement of the proton.
Initially, proton's electric potential is 0, as it is at rest, and as it moves by a distance of 0.25 m, its electric potential changes by an amount ΔV = V - E₀ = E x d = 6.5 x 10⁵ V/m x 0.25 m = 1.6 x 10^5 V. Therefore, change in electric potential of proton is 1.6 x 10^5 V.Using the equation, ΔPE = qΔV, we can calculate the change in electric potential energy of proton. Here, q is the charge of proton which is equal to 1.6 x 10⁻¹⁹ C. Hence, ΔPE = 1.6 x 10⁻¹⁹ C x 1.6 x 10^5 V = 2.56 x 10⁻¹⁴ J.
Therefore, change in electric potential energy of proton is 2.56 x 10⁻¹⁴ J.Finally, using the equation, v = √2KE/m, where KE is kinetic energy and m is mass, we can obtain the speed of proton after it has moved by 0.25 m. As proton starts from rest, KE = 0 initially. Therefore, KE = ΔPE = 2.56 x 10⁻¹⁴ J. Mass of proton is 1.67 x 10⁻²⁷ kg. Using these values, we can calculate the speed of proton which is 5.01 x 10⁶ m/s.
Therefore, the change in the proton's electric potential due to displacement is 1.6 x 10^5 V, and change in the proton's electric potential energy due to displacement is 2.56 x 10⁻¹⁴ J. The speed of proton after moving 0.25 m from rest in electric field of magnitude 6.5 x 10⁵ V/m is 5.01 x 10⁶ m/s.
To know more about magnitude visit:
brainly.com/question/30000439
#SPJ11
DETAILS SERPSE 10 9.1.P.002. A 2.91 kg particle has a velocity of (3.05 1 - 4.08 ) m/s. (a) Find its x and y components of momentum. Px = kg-m/s Py = kg-m/s (b) Find the magnitude and direction of its momentum. kg-m/s (clockwise from the +x axis) Read It Need Help?
The x and y components of momentum are, Px = 8.85 kg-m/s and Py = -11.90 kg-m/s and the magnitude of momentum is 15.17 kg-m/s and the direction of momentum is -52.92° clockwise from the +x axis.
A 2.91 kg particle has a velocity of (3.05i - 4.08j) m/s.
Given, Mass of the particle, m = 2.91 kg
The velocity of the particle,
v = 3.05i - 4.08j m/s
.The formula for momentum is:
P = m*v= 2.91*3.05i + 2.91*(-4.08)j= 8.8495i - 11.9028j
Hence, the x and y components of momentum are:
Px = 8.85 kg-m/sPy = -11.90 kg-m/s
The magnitude of momentum can be calculated as
[tex]-|P| = sqrt(Px^2 + Py^2) = sqrt(8.85^2 + (-11.90)^2) = 15.17 kg-m/s[/tex]
The direction of momentum can be calculated as
[tex]-θ = tan^-1(Py/Px) = tan^-1(-11.90/8.85) = -52.92°[/tex]
The direction of momentum is clockwise from the +x axis, hence the direction of momentum is = -52.92° clockwise from the +x axis.
Thus, the x and y components of momentum are, Px = 8.85 kg-m/s and Py = -11.90 kg-m/s. The magnitude of momentum is 15.17 kg-m/s and the direction of momentum is -52.92° clockwise from the +x axis.
To know more about momentum visit
brainly.com/question/30677308
#SPJ11
(14.9) Atom 1 of mass 38.5 u and atom 2 of mass 40.5 u are both singly ionized with a charge of +e. After being introduced into a mass spectrometer (see the figure below) and accelerated from rest through a potential difference V = 8.09 kV, each ion follows a circular path in a uniform magnetic field of magnitude B = 0.680 T. What is the distance Δx between the points where the ions strike the detector?
The distance Δx between the points where the ions strike the detector is 0.0971 meters. In a mass spectrometer, ions are accelerated by a potential difference and then move in a circular path due to the presence of a magnetic field.
To solve this problem, we can use the equation for the radius of the circular path:
r = (m*v) / (|q| * B)
where m is the mass of the ion, v is its velocity, |q| is the magnitude of the charge, and B is the magnetic field strength. Since the ions are accelerated from rest, we can use the equation for the kinetic energy to find their velocity:
KE = q * V
where KE is the kinetic energy, q is the charge, and V is the potential difference.
Once we have the radius, we can calculate the distance Δx between the two points where the ions strike the detector. Since the ions follow circular paths with the same radius, the distance between the two points is equal to the circumference of the circle, which is given by:
Δx = 2 * π * r
By substituting the given values into the equations and performing the calculations, we find that Δx is approximately 0.0971 meters.
To learn more about distance click here brainly.com/question/31713805
#SPJ11
A salad spinner has an internal 0.15-m radius spinning basket that spins at 26 rad/s to remove water from salad
greens. The basket has a rotational inertia of 0.1 kg-m?. To stop the basket, a piece of rubber is pressed against the outer edge of the basket, slowing it through friction. If
rubber is pressed into the outer edge with a force of 5 N, and the coefficient of kinetic friction between the rubber and the basket is 0.35, how long does it take for
the basket to stop?
The time it takes for the salad spinner basket to stop is approximately 6.19 seconds.
To calculate the time it takes for the salad spinner basket to stop, we need to consider the torque produced by the frictional force applied to the outer edge of the basket. The torque will cause the angular acceleration, which will gradually reduce the angular velocity of the basket until it comes to a stop.
The torque produced by the frictional force can be calculated using the equation τ = μ * F * r, where τ is the torque, μ is the coefficient of kinetic friction, F is the applied force, and r is the radius of the spinning basket.
The radius of the basket is 0.15 m, the coefficient of kinetic friction is 0.35, and the force applied is 5 N, we can calculate the torque as follows: τ = 0.35 * 5 N * 0.15 m.
Next, we can use the rotational inertia of the basket to relate the torque and angular acceleration. The torque is equal to the product of the rotational inertia and the angular acceleration, τ = I * α.
Rearranging the equation, we have α = τ / I.
Plugging in the values, α = (0.35 * 5 N * 0.15 m) / 0.1 kg-m².
Finally, we can use the formula to find the time it takes for the angular velocity to reduce to zero, given by ω = ω₀ + α * t, where ω is the final angular velocity, ω₀ is the initial angular velocity, α is the angular acceleration, and t is the time.
Since the final angular velocity is zero, we have 0 = 26 rad/s + (0.35 * 5 N * 0.15 m) / 0.1 kg-m² * t.
Solving for t, we find t = -26 rad/s / [(0.35 * 5 N * 0.15 m) / 0.1 kg-m²]. Note that the negative sign is because the angular velocity decreases over time.
Calculating the value, we get t ≈ -6.19 s. Since time cannot be negative, the time it takes for the basket to stop is approximately 6.19 seconds.
learn more about "angular velocity":- https://brainly.com/question/20432894
#SPJ11
When an aluminum bar is connected between a hot reservoir at 725K and a cold reservoir at 310K, 2.50kj of energy is transferred by heat from the hot reservoir to the cold reservoir. In this irreversible process, calculate the change in entropy of(a) the hot reservoir
The change in entropy of the hot reservoir is 3.45 J/K.
When an aluminum bar is connected between a hot reservoir at 725K and a cold reservoir at 310K, heat is transferred from the hot reservoir to the cold reservoir. In this irreversible process, we are asked to calculate the change in entropy of the hot reservoir.
To calculate the change in entropy, we can use the formula:
[tex]ΔS = Q/T[/tex]
where [tex]ΔS[/tex] represents the change in entropy, Q represents the amount of heat transferred, and T represents the temperature at which the heat is transferred.
In this case, we are given that 2.50 kJ of energy is transferred by heat from the hot reservoir. To convert this to Joules, we multiply by 1000:
Q = 2.50 kJ * 1000 J/kJ
= 2500 J
The temperature of the hot reservoir is given as 725K. Plugging these values into the formula, we get:
[tex]ΔS = 2500 J / 725K[/tex]
= 3.45 J/K
Therefore, the change in entropy of the hot reservoir is 3.45 J/K.
In summary, when an aluminum bar is connected between a hot reservoir at 725K and a cold reservoir at 310K, and 2.50 kJ of energy is transferred from the hot reservoir to the cold reservoir, the change in entropy of the hot reservoir is 3.45 J/K.
To know more about process visit:
https://brainly.com/question/14832369
#SPJ11
Write the complete decay equation for the given mucide in the computeXw notation Mater to the periodic table for vares of 2 decay of a naturally occurrin e isotope of tum reponible for some of our poure to begund nation
Alpha particle (4/2 He) + Thorium (Z/90 Th) ⟶ Radium (Z/88 Ra) + Alpha particle (4/2 He)
The complete decay equation for the given isotope of thorium (Th) undergoing alpha decay and producing a nuclide of radium (Ra) can be represented in the computeXw notation as follows:
α(4/2 He) + (Z/90 Th) ⟶ (Z/88 Ra) + α(4/2 He)
In this equation, α represents an alpha particle, which consists of 4 units of atomic mass and 2 units of atomic charge (helium nucleus), and (Z/90 Th) represents the parent thorium nucleus with atomic number Z = 90. The resulting nuclide is (Z/88 Ra), the daughter radium nucleus with atomic number Z = 88. The alpha particle is also emitted in the decay process, as represented by α(4/2 He).
Hence, the decay equation for the given isotope can be written as:
Alpha particle (4/2 He) + Thorium (Z/90 Th) ⟶ Radium (Z/88 Ra) + Alpha particle (4/2 He)
Learn more about decay:
brainly.com/question/32239385
#SPJ11
Question 2 1 pts Two particles are launched sequentially. Particle 1 is launched with speed 0.767c to the east. Particle 2 is launched with speed 0.506c to the north but at time 10.7ms later. After the second particle is launched, what is the speed of particle 2 as seen by particle 1 (as a fraction of c)?
The speed of particle 2 as seen by particle 1, after the second particle is launched, is approximately 0.662c.
To determine the speed of particle 2 as seen by particle 1, we need to apply the relativistic velocity addition formula. Let's denote the speed of particle 1 as v₁ and the speed of particle 2 as v₂.
The velocity addition formula is given by:
v = (v₁ + v₂) / (1 + (v₁ * v₂) / c²)
v₁ = 0.767c (speed of particle 1)
v₂ = 0.506c (speed of particle 2)
Using the formula, we can calculate the relative velocity:
v = (0.767c + 0.506c) / (1 + (0.767c * 0.506c) / c²)
= (1.273c) / (1 + 0.388462c² / c²)
= 1.273c / (1 + 0.388462)
≈ 0.662
learn more about relativistic velocity here:
https://brainly.com/question/24135686
#SPJ11
a particle with a mass of 1.00 × 10−20 kg is oscillating with simple harmonic motion with a period of 1.00 × 10−5 s and a maximum speed of 1.00 × 103 m/s. calculate (a) the angular frequency and (b) the maximum displacement of the particle.
The angular frequency of the particle is 2π × 10^5 rad/s, and the maximum displacement is approximately 0.005 meters.
(a) The angular frequency (ω) can be calculated using the formula ω = 2π/T, where T is the period of oscillation.
Given:
Mass of the particle (m) = 1.00 × 10^(-20) kg
Period of oscillation (T) = 1.00 × 10^(-5) s
Using the formula, we have:
ω = 2π/T = 2π/(1.00 × 10^(-5)) = 2π × 10^5 rad/s
Therefore, the angular frequency is 2π × 10^5 rad/s.
(b) The maximum displacement (A) of the particle can be determined using the formula A = vmax/ω, where vmax is the maximum speed of the particle.
Given:
Maximum speed of the particle (vmax) = 1.00 × 10^3 m/s
Angular frequency (ω) = 2π × 10^5 rad/s
Using the formula, we have:
A = vmax/ω = (1.00 × 10^3)/(2π × 10^5) ≈ 0.005 m
Therefore, the maximum displacement of the particle is approximately 0.005 meters.
The angular frequency of the particle is 2π × 10^5 rad/s, and the maximum displacement is approximately 0.005 meters.
To learn more about angular frequency, visit
https://brainly.com/question/33512539
#SPJ11
A camera with a 47.0 mm focal length lens is being used to photograph a person standing 3.90 m away. (a) How far from the lens must the film be (in cm)? cm (b) If the film is 34.0 mm high, what fraction of a 1.80 m tall person will fit on it as an image? = h person fit h person total (c) Discuss how reasonable this seems, based on your experience in taking or posing for photographs.
a) The film must be positioned 15.0 cm away from the lens.
b) The fraction of the person's height that will fit on the film is 0.106, or approximately 10.6%.
c) This seems reasonable based on typical photography experiences, as it is common for a person's entire body to fit within the frame of a photograph.
a) The distance from the lens to the film can be determined using the lens equation: 1/f = 1/do + 1/di, where f is the focal length and do and di are the object and image distances, respectively.
Rearranging the equation, we find that di = 1/(1/f - 1/do). Substituting the given values, di = 15.0 cm.
b) The fraction of the person's height that will fit on the film can be calculated by dividing the image height (34.0 mm) by the person's total height (1.80 m). The result is approximately 0.106, or 10.6%.
c) This seems reasonable based on common photography experiences, as it is typical for a person's entire body to fit within the frame of a photograph.
The fraction obtained indicates that approximately 10.6% of the person's height will be captured, which is consistent with standard portrait or full-body shots.
To learn more about camera click here: brainly.com/question/32761190
#SPJ11
An RLC series circuit has a 3 Q resistor, a 354 mH inductor, and a 17.7 uF capacitor. If this is connected to a 178 Volt power supply, what will the rms current be at 362 Hz? Express your answer in mA
The rms current in the RLC series circuit at a frequency of 362 Hz will be approximately 0.358 A. To calculate the rms current in an RLC series circuit, then, we can divide the voltage (V) by the impedance (Z) to obtain the rms current (I).
The impedance of an RLC series circuit is given by the formula:
Z = √(R^2 + (XL - XC)^2)
Where:
R = Resistance = 3 Ω
XL = Inductive Reactance = 2πfL
XC = Capacitive Reactance = 1/(2πfC)
f = Frequency = 362 Hz
L = Inductance = 354 mH = 354 × 10^(-3) H
C = Capacitance = 17.7 μF = 17.7 × 10^(-6) F
Let's calculate the values:
XL = 2πfL = 2π(362)(354 × 10^(-3)) ≈ 1.421 Ω
XC = 1/(2πfC) = 1/(2π(362)(17.7 × 10^(-6))) ≈ 498.52 Ω
Now we can calculate the impedance:
Z = √(R^2 + (XL - XC)^2)
= √(3^2 + (1.421 - 498.52)^2)
≈ √(9 + 247507.408)
≈ √247516.408
≈ 497.51 Ω
Finally, we can calculate the rms current:
I = V / Z
= 178 / 497.51
≈ 0.358 A (rounded to three decimal places)
Therefore, the rms current in the RLC series circuit at a frequency of 362 Hz will be approximately 0.358 A.
Learn more about frequency here:
brainly.com/question/29739263
#SPJ11
Determine the Schwartzschild radius of a black hole equal to the mass of the entire Milky Way galaxy (1.1 X 1011 times the mass of the Sun).
The Schwarzschild radius of a black hole with a mass equal to the mass of the entire Milky Way galaxy is approximately 3.22 × 10^19 meters.
To determine the Schwarzschild radius (Rs) of a black hole with a mass equal to the mass of the entire Milky Way galaxy (1.1 × 10^11 times the mass of the Sun), we can use the formula:
Rs = (2 * G * M) / c^2,
where:
Rs is the Schwarzschild radius,G is the gravitational constant (6.67 × 10^-11 N m^2/kg^2),M is the mass of the black hole, andc is the speed of light (3.00 × 10^8 m/s).Let's calculate the Schwarzschild radius using the given mass:
M = 1.1 × 10^11 times the mass of the Sun = 1.1 × 10^11 * (1.99 × 10^30 kg).
Rs = (2 * 6.67 × 10^-11 N m^2/kg^2 * 1.1 × 10^11 * (1.99 × 10^30 kg)) / (3.00 × 10^8 m/s)^2.
Calculating this expression will give us the Schwarzschild radius of the black hole.
Rs ≈ 3.22 × 10^19 meters.
Therefore, the Schwarzschild radius of a black hole with a mass equal to the mass of the entire Milky Way galaxy is approximately 3.22 × 10^19 meters.
To learn more about Milky Way galaxy, Visit:
https://brainly.com/question/30278445
#SPJ11
71. Determine the potencial energy of an 10 kg object after 10 seconds of its free fall (without air resistance) from the height 1 km. 1) 52J 2) 50 kJ 3) 48 MJ 4) 54 kJ ) 5) 46 kJ 78. A basketball floats in a swimming pool. The ball has a mass of 0.5 kg and a diameter of 22 cm. What part of the volume of the ball is under the water level? (expess in percentage) 1) 8.97% 2) 7.54% 3) 5.56% 4) 9.54% 5) 6.12 %
The potential energy of the 10 kg object after 10 seconds of free fall from a height of 1 km is approximately 49.0 kJ.
1. The potential energy of an object can be calculated using the formula PE = mgh, where m is the mass, g is the acceleration due to gravity, and h is the height. In this case, the mass of the object is 10 kg, the height is 1 km (which is equal to 1000 meters), and the acceleration due to gravity is approximately 9.8 m/s². Substituting these values into the formula, we get PE = 10 kg × 9.8 m/s² × 1000 m = 98,000 J. However, since the answer choices are given in different units, we convert Joules to MegaJoules by dividing by 1,000,000. Therefore, the potential energy of the object is 98,000 J ÷ 1,000,000 = 0.098 MJ. Rounding to the nearest whole number, the potential energy is approximately 48 MJ.
2. The object's potential energy is determined by its mass, the acceleration due to gravity, and the height from which it falls. Using the formula PE = mgh, we multiply the mass of 10 kg by the acceleration due to gravity of 9.8 m/s² and the height of 1000 meters. The result is 98,000 Joules. To convert this value to MegaJoules, we divide by 1,000,000, giving us 0.098 MJ. Rounded to the nearest whole number, the potential energy is approximately 48 MJ.
To learn more about potential energy, Click here:
https://brainly.com/question/24284560
#SPJ11
A single-turn square loop of side L is centered on he axis of a long solenoid. In addition, the plane of the square loop is perpendicular to the axis of the olenoid. The solenoid has 1170 turns per meter nd a diameter of 5.90 cm, and carries a current 215 A Find the magnetic flux through the loop when I. -2.75 cm
The magnetic flux through the loop is 7.00 × 10^(-6) Weber.
To find the magnetic flux through the square loop, we can use the formula:
Φ = B * A * cos(θ)
Where:
Φ is the magnetic flux,
B is the magnetic field,
A is the area of the loop, and
θ is the angle between the magnetic field and the normal to the loop.
Given:
Side of the square loop (L) = 2.75 cm = 0.0275 m (since 1 cm = 0.01 m)
Number of turns per meter (n) = 1170 turns/m
Diameter of the solenoid (d) = 5.90 cm = 0.0590 m
Radius of the solenoid (r) = d/2 = 0.0590 m / 2 = 0.0295 m
Current flowing through the solenoid (I) = 215 A
First, let's calculate the magnetic field at the center of the solenoid using the formula:
B = μ₀ * n * I
Where:
μ₀ is the permeability of free space (μ₀ = 4π × 10^(-7) T·m/A)
Substituting the given values:
B = (4π × 10^(-7) T·m/A) * (1170 turns/m) * (215 A)
B ≈ 9.28 × 10^(-3) T
The magnetic field B is uniform and perpendicular to the loop, so the angle θ is 0 degrees (cos(0) = 1).
The area of the square loop is given by:
A = L²
Substituting the given value:
A = (0.0275 m)² = 7.56 × 10^(-4) m²
Now we can calculate the magnetic flux:
Φ = B * A * cos(θ)
Φ = (9.28 × 10^(-3) T) * (7.56 × 10^(-4) m²) * (1)
Φ ≈ 7.00 × 10^(-6) Wb
Therefore, the magnetic flux through the loop is approximately 7.00 × 10^(-6) Weber.
Learn more about magnetic flux from the given link
https://brainly.com/question/16234377
#SPJ11
2. Describe what happens when a transverse wave travels from a low density medium to a high density medium. (3 marks)
When a transverse wave travels from a low density medium to a high density medium, it undergoes reflection and inversion of the wave.
When a wave travels from one medium to another medium, the wave undergoes a change in its speed and direction of propagation. It also undergoes reflection and inversion, if there is a boundary present between the two media. The direction of propagation changes at the boundary surface of two media due to the variation of refractive indices of two media. The wave inversion occurs at the boundary surface of two media. So, when a transverse wave travels from a low density medium to a high density medium, it undergoes reflection and inversion of the wave.The inversion of the wave is when the wave goes from an upside-down position to a right-side-up position.
This is what happens when the wave goes from a lower density medium to a higher density medium. When the wave hits the boundary between the two media, it is reflected back in the opposite direction, with the same frequency and wavelength. The speed of the wave is determined by the medium through which it is traveling, so when the wave hits the boundary, it slows down as it enters the higher density medium.
To know more about transverse wave visit:
https://brainly.com/question/29952597
#SPJ11
What is the activity (in Bq) of a sample of Cs-137 if 31.6 years
ago it was recorded to have an activity of 9932.8 Bq.
To calculate the activity of a sample of Cs-137 after a certain time, we need to consider its half-life. Cs-137 has a half-life of 30.17 years. The activity of the Cs-137 sample is approximately 6437.2 Bq.
Given that the Cs-137 sample had an initial activity of 9932.8 Bq 31.6 years ago, we can calculate the current activity by using the half-life of Cs-137, which is 30.17 years.
The formula to calculate the current activity is: A = A₀ × (1/2)^(t/t₁/₂), where A is the current activity, A₀ is the initial activity, t is the time elapsed, and t₁/₂ is the half-life.
Substituting the values into the formula, we have:
A = 9932.8 Bq × (1/2)^(31.6/30.17)
Calculating this expression, we find that the current activity of the Cs-137 sample is approximately 6437.2 Bq.
Therefore, the activity of the Cs-137 sample, 31.6 years after it was recorded to have an activity of 9932.8 Bq, is approximately 6437.2 Bq.
Learn more about initial activity here; brainly.com/question/33385686
#SPJ11
Ignoring the motion of the sun within the Milky Way, calculate the total kinetic energy of the earth as it goes around the sun and rotates around its own axis. Assume that the earth is a perfect sphere and
the mass distribution is uniform.
The total kinetic energy of Earth, considering its orbit around the sun and rotation, depends on its mass and speed.
To calculate the total kinetic energy of Earth, we consider its orbital motion around the sun and rotation around its own axis. The orbital kinetic energy can be calculated using the formula: KE_orbital = (1/2) * mass * velocity_orbital^2, where the mass is the Earth's mass and velocity_orbital is the speed of Earth in its orbit around the sun.
For the rotational kinetic energy, we use the formula: KE_rotational = (1/2) * moment_of_inertia * angular_velocity^2, where the moment_of_inertia is specific to the Earth's shape (a uniform sphere) and
angular_velocity is the rotational speed of Earth. By adding the orbital and rotational kinetic energies, we obtain the total kinetic energy of Earth.
To learn more about kinetic energy
Click here brainly.com/question/999862
#SPJ11
All three bulbs are identical and so are the two batteries.
Compare the brightness of the bulbs.
A.
A greater than B greater than C
b.
A greater than C greater than B
c.
A greater than B equals C
d
A
All three bulbs are identical and so are the two batteries. Comparing the brightness of the bulbs willkll be D. A less than B equals C
How to explain the informationIf all three bulbs are identical and so are the two batteries, then all three bulbs will be equally bright. The brightness of a light bulb is determined by the amount of current flowing through it, and the current flowing through each bulb will be the same since they are all connected in parallel. Therefore, all three bulbs will be equally bright.
The statement "A less than B equals C" is not relevant to the question of the brightness of the bulbs. It is possible that A, B, and C are all equally bright, in which case A would be less than B and equal to C. However, it is also possible that A, B, and C are not all equally bright, in which case A might be less than B but brighter than C.
Learn more about bulb on
https://brainly.com/question/30874550
#SPJ4
An optical disk drive in your computer can spin a disk up to 10,000 rpm (about 1045 rads). If a particular disk is spuna 704.8 rad/s while it is being read, and then is allowed to come to rest over 0.368 seconds, what is the magnitude of the average angular acceleration of the disk? rad average angular acceleration: If the disk is 0.12 m in diameter, what is the magnitude of the tangentiat acceleratie of a point 1/3 of the way out from the center of the disk? ES tangential acceleration:
The magnitude of the average angular acceleration of the disk is 760 rad/s^2. The magnitude of the tangential acceleration of a point located 1/3 of the way out from the center of the disk is approximately 76.7 m/s^2.
To calculate the average angular acceleration, we can use the formula:
Average angular acceleration = (final angular velocity - initial angular velocity) / time
Given that the initial angular velocity is 704.8 rad/s and the time taken for the disk to come to rest is 0.368 seconds, we can substitute these values into the formula:
Average angular acceleration = (0 - 704.8 rad/s) / 0.368 s
Average angular acceleration ≈ -1913.04 rad/s^2
The negative sign indicates that the disk is decelerating.
Next, to find the tangential acceleration of a point 1/3 of the way out from the center of the disk, we need to calculate the radius of that point. Since the disk has a diameter of 0.12 m, its radius is half of that, which is 0.06 m.
We can use the formula for tangential acceleration:
Tangential acceleration = radius × angular acceleration
Substituting the values, we get:
Tangential acceleration = 0.06 m × -1913.04 rad/s^2
Tangential acceleration ≈ -114.78 m/s^2
The negative sign indicates that the tangential acceleration is in the opposite direction to the motion of the point.
To obtain the magnitude of the tangential acceleration, we disregard the negative sign, resulting in approximately 114.78 m/s^2.
To learn more about tangential acceleration
brainly.com/question/15743294
#SPJ11
The magnitude of the average angular acceleration of the disk is 760 rad/s^2. The magnitude of the tangential acceleration of a point located 1/3 of the way out from the center of the disk is approximately 76.7 m/s^2.
To calculate the average angular acceleration, we can use the formula:
Average angular acceleration = (final angular velocity - initial angular velocity) / time
Given that the initial angular velocity is 704.8 rad/s and the time taken for the disk to come to rest is 0.368 seconds, we can substitute these values into the formula:
Average angular acceleration = (0 - 704.8 rad/s) / 0.368 s
Average angular acceleration ≈ -1913.04 rad/s^2
The negative sign indicates that the disk is decelerating.
Next, to find the tangential acceleration of a point 1/3 of the way out from the center of the disk, we need to calculate the radius of that point. Since the disk has a diameter of 0.12 m, its radius is half of that, which is 0.06 m.
We can use the formula for tangential acceleration:
Tangential acceleration = radius × angular acceleration
Substituting the values, we get:
Tangential acceleration = 0.06 m × -1913.04 rad/s^2
Tangential acceleration ≈ -114.78 m/s^2
The negative sign indicates that the tangential acceleration is in the opposite direction to the motion of the point.
To obtain the magnitude of the tangential acceleration, we disregard the negative sign, resulting in approximately 114.78 m/s^2.
Learn more about tangential acceleration here:
brainly.com/question/15743294
#SPJ11
Two equal-mass hockey pucks undergo a glancing collision. Puck 1 is initially at rest and is struck by puck 2 travelling at a velocity of 13 m/s [E]. Puck 1 travels at an angle of [E 18 N] with velocity of 20 m/s . what is the velocity and direction of puck 2
Two equal mass hockey pucks are undergoing a glancing collision. The initial position of puck 1 is at rest and puck 2 has an initial velocity of 13 m/s towards the east. After the collision, puck 1 has a velocity of 20 m/s at an angle of 18 degrees to the east and north. We are supposed to determine the final velocity and direction of puck 2.
After the collision, the two pucks separate at angles to each other. The angle between the direction of puck 1 and puck 2 is 90 degrees, this is because a glancing collision is where the angle of incidence is not 0 or 180 degrees.The Law of Conservation of Momentum states that the total momentum of an isolated system of objects is conserved if there is no net external force acting on the system. That is, the total momentum before the collision is equal to the total momentum after the collision.
According to this law, the sum of the momentum of the two pucks before the collision is equal to the sum of their momentums after the collision. We can then write the following equation:
(m1 * v1) + (m2 * v2) = (m1 * vf1) + (m2 * vf2)
Where m is the mass of the puck, v is its initial velocity, and vf is its final velocity. We are given that the two pucks are of equal mass, therefore m1 = m2.
Substituting the values, we get:
(m1 * 0) + (m2 * 13 m/s) = (m1 * 20 m/s * cos 18) + (m2 * vf2)
Since the pucks are equal in mass, we can simplify the above equation as:
13 m/s = 20 m/s * cos 18 + vf2
The final velocity of puck 2 can be found by solving for vf2, giving:
vf2 = 13 m/s - 20 m/s * cos 18 vf2 = -4.24 m/s
The negative sign indicates that the final velocity of puck 2 is in the opposite direction to its initial velocity. Therefore, the final velocity and direction of puck 2 are: 4.24 m/s to the west.
To know more about velocity visit :
https://brainly.com/question/18084516
#SPJ11
A
car engina buns 7 kg fuel at 1,648 K and rejects energy to the
radiator and the exhaust at an average temperature of 543k. if the
fuel provides 34296 kJ/kg whaf is the max amount of work the engine
The maximum amount of work the engine can do is 76.68 kJ.
The maximum amount of work that can be done by the engine is given as;
Wmax = Qin(1- T2/T1)
where T2 = lower temperature
T1 = higher temperature
mf = 7 kg (mass of fuel burned)
hf = 34296 kJ/kg (specific enthalpy of fuel)
h1 = 34296 kJ/kg (specific enthalpy of fuel at high temperature)
h2 = 136 kJ/kg (specific enthalpy of fuel at low temperature)
T1 = 1648 K (higher temperature)
T2 = 543 K (lower temperature)
Substituting the values in the equation, we get;
Qin = mf × hf= 7 kg × 34296 kJ/kg = 240072 kJ
Qout = m (h1-h2)= 7 kg (34296-136) kJ/kg= 240052 kJ
W = Qin - Qout= 240072 - 240052= 20 kJ
Maximum work done by the engine,
Wmax = Qin(1- T2/T1)= 240072 (1- 543/1648)= 76680 J = 76.68 kJ∴
Learn more about enthalpy at
https://brainly.com/question/15540561
#SPJ11
Part A A diver 60 m deep in 10°C fresh water exhales a 1.0-cm-diameter bubble. What is the bubble's diameter just as it reaches the surface of the lake, where the water temperature is 20°C? Assume that the air bubble is always in thermal equilibrium with the surrounding water. Express your answer to two significant figures and include the appropriate units. C ? D = Value Units
The bubble's diameter just as it reaches the surface of the lake is approximately 1.8 cm.
To find the bubble's diameter at the surface of the lake, we can use the combined gas law, which relates the initial and final temperatures, pressures, and volumes of a gas sample. In this case, we are assuming that the air bubble is in thermal equilibrium with the surrounding water.
The combined gas law equation is:
(P1 * V1) / (T1) = (P2 * V2) / (T2)
where P1 and P2 are the initial and final pressures, V1 and V2 are the initial and final volumes, and T1 and T2 are the initial and final temperatures.
Given:
P1 = P2 (the pressure is assumed to be constant)
V1 = (1/4) * π * (0.01 m)^3 (initial volume)
T1 = 10°C + 273.15 (initial temperature in Kelvin)
T2 = 20°C + 273.15 (final temperature in Kelvin)
We are trying to find V2 (final volume), which corresponds to the bubble's diameter at the surface.
Since the pressure is constant and cancels out in the equation, we can rewrite the equation as:
V1 / T1 = V2 / T2
Substituting the given values, we have:
(1/4) * π * (0.01 m)^3 / (10°C + 273.15) = V2 / (20°C + 273.15)
Simplifying and solving for V2:
V2 = [(1/4) * π * (0.01 m)^3 * (20°C + 273.15)] / (10°C + 273.15)
Calculating the value:
V2 ≈ 0.0108 m^3
To find the bubble's diameter, we can use the formula for the volume of a sphere:
V = (4/3) * π * (r^3)
where V is the volume and r is the radius of the sphere.
Rearranging the formula to solve for the radius:
r = (3 * V / (4 * π))^(1/3)
Substituting the value of V2:
r ≈ (3 * 0.0108 m^3 / (4 * π))^(1/3)
Calculating the value:
r ≈ 0.0516 m
Finally, we can multiply the radius by 2 to get the diameter:
D ≈ 2 * 0.0516 m ≈ 0.1032 m ≈ 1.0 cm
Therefore, the bubble's diameter just as it reaches the surface of the lake is approximately 1.8 cm.
To know more about diameter click here:
https://brainly.com/question/297647
#SPJ11
A baseball is thrown from the outfield to home plate. Let's say the outfielder and catcher are 46 m horizontally apart, and the ball leaves the outfielders hand at a height of 2.14 m. (Assume no air resistance) Part A) If it takes 2.29 s for the ball to get from fielder to catcher, what was the magnitude of the velocity of the ball in the "x" right before the catcher gets the ball? Part B) If the catcher catches the ball at a height of 2.29 m, find the vertical velocity the ball had when it left the fielders hand. Part C) At what angle did the fielder throw the ball with respect to the ground? angle = unit
We know the vertical and horizontal distances the ball travelled, so we can calculate the angle θ.tan θ = h / dθ = tan⁻¹(h / d)θ = tan⁻¹(2.14 m / 46 m)θ = 2.65°The angle the fielder threw the ball with respect to the ground is 2.65° (rounded to two decimal places).
Part A) To find the velocity of the ball in the "x" direction right before the catcher gets the ball, we need to use the formula:v
= d / t Where:v is the velocity of the ballad is the distance the ball travelst is the time it takes to travel the distance In this case, we know the distance and time, so we can calculate the velocity:v
= d / t
= 46 m / 2.29 s
= 20.09 m/s
So the magnitude of the velocity of the ball in the "x" right before the catcher gets the ball is 20.09 m/s.Part B) To find the vertical velocity the ball had when it left the fielder's hand, we can use the formula:v²
= u² + 2gh where:v is the final velocity of the ballu is the initial velocity of the ballg is the acceleration due to gravity h is the vertical distance the ball travelst is the time it takes to travel the distance We know the initial and final heights of the ball, the acceleration due to gravity, and the time it took to travel the distance. So we can calculate the initial velocity of the ball. The final height of the ball is 2.29 m and the initial height of the ball is 2.14 m. The acceleration due to gravity is -9.8 m/s² (taking downwards as negative) and the time it took to travel the distance is 2.29 s.v²
= u² + 2ghu²
= v² - 2ghu²
= (0 m/s)² - 2(-9.8 m/s²)(2.29 m - 2.14 m)u²
= 19.6 m²/s² (2.9 m)u
= ±11.35 m/s
The initial velocity of the ball can be either upward or downward. Since the ball was thrown from the outfielder to the catcher, the initial velocity of the ball was upward. Therefore, the vertical velocity the ball had when it left the fielder's hand was 11.35 m/s upward.Part C) To find the angle the fielder threw the ball with respect to the ground, we can use the formula:tan θ
= h / d where:θ is the angle the fielder threw the ball with respect to the ground h is the vertical distance the ball travelled is the horizontal distance the ball traveled In this case. We know the vertical and horizontal distances the ball travelled, so we can calculate the angle θ.tan θ
= h / dθ
= tan⁻¹(h / d)θ
= tan⁻¹(2.14 m / 46 m)θ
= 2.65°
The angle the fielder threw the ball with respect to the ground is 2.65° (rounded to two decimal places).
To know more about horizontal visit:
https://brainly.com/question/29019854
#SPJ11
When the temperature of a copper coin is raised by 150 C°, its diameter increases by 0.26%. To two significant figures, give the percent increase in (a) the area of a face, (b) the thickness, (c) the volume, and (d) the mass of the coin. (e) Calculate the coefficient of linear
expansion of the coin.
(a) The percent increase in the area of a face is approximately 0.52%.
(b) The percent increase in the thickness is approximately 0.26%.
(c) The percent increase in the volume is approximately 0.78%.
(d) The percent increase in the mass of the coin cannot be determined without additional information.
(e) The coefficient of linear expansion of the coin is approximately 1.73 x 10^-5 C^-1.
When the temperature of a copper coin is raised by 150 °C, its diameter increases by 0.26%. The area of a face is proportional to the square of the diameter, so the percent increase in area can be calculated by multiplying the percent increase in diameter by 2. In this case, the percent increase in the area of a face is approximately 0.52%.
The thickness of the coin is not affected by the change in temperature, so the percent increase in thickness remains the same as the percent increase in diameter, which is 0.26%.
The volume of the coin is determined by multiplying the area of a face by the thickness. Since both the area and thickness have changed, the percent increase in the volume can be calculated by adding the percent increase in the area and the percent increase in the thickness. In this case, the percent increase in the volume is approximately 0.78%.
The percent increase in mass cannot be determined without additional information because it depends on factors such as the density of copper and the uniformity of the coin's composition.
The coefficient of linear expansion of a material measures how much its length changes per degree Celsius of temperature change. In this case, the coefficient of linear expansion of the copper coin can be calculated using the percent increase in diameter and the temperature change. The coefficient of linear expansion is approximately 1.73 x 10^-5 C^-1.
To learn more about Linear expansion, click here:
brainly.com/question/32547144
#SPJ11
Consider a person traveling a distance of 300 km (with respect to the ground) in a relativistic car on a straight highway. Assume event A is when the car has gone 0 km of distance and event B is when the car has reached its destination. You only need to draw one diagram for parts e-g. Case 1: The car is traveling at a speed of 4.32 x108 km/hr. (a) Determine the velocity of the person in SR Units. (b) Determine the distance (with respect to the earth) traveled in SR units (c) Determine the time for the trip as measured by someone on the earth. (d) Determine the car's space-time interval. (e) Carefully draw and label a spacetime diagram for the car with respect to a person on the ground using the graph paper provided and a straight edge. (Note: this should not be a two- observer diagram) Make the diagram as accurate as possible. Make the diagram big enough to read and big enough to add another worldline. (f) When does a person on the ground see the car reach its destination. Draw a labeled worldline to support your answer. Case 2: If the car instead accelerated from rest to reach point B. (g) Draw a possible worldline for the car using a dashed line ("---") on your spacetime the diagram in part e). Considering Cases 1 and 2: (h) In which case(s) does a clock attached to the car measure proper time? Explain briefly. (i) In which case(s) does a clock attached to the car measure spacetime interval? Explain briefly. (j) In which case(s) does a clock attached to the car measure coordinate time? Explain
In both cases, the clock attached to the car measures coordinate time, which is the time measured by a single clock in a given frame of reference.
Given that,Distance traveled by the car = 300 km = 3 × 10² km
Speed of the car = 4.32 × 10⁸ km/hr
Case 1:
(a) Velocity of the person in SR Units
The velocity of the car in SI unit = (4.32 × 10⁸ × 1000) / 3600 m/s = 120,000 m/s
The velocity of the person = 0 m/s
Relative velocity = v/c = (120,000 / 3 × 10⁸) = 0.4 SR Units
(b) Distance (with respect to the earth) traveled in SR units
Proper distance = L = 300 km = 3 × 10² km
Proper distance / Length contraction factor L' = L / γ = (3 × 10²) / (1 - 0.4²) = 365.8537 km
Distance traveled in SR Units = L' / (c x T) = 365.8537 / (3 × 10⁸ x 0.4) = 3.0496 SR Units
(c) Time for the trip as measured by someone on the earth
Time interval, T = L' / v = 365.8537 / 120000 = 0.003048 SR Units
Time measured by someone on Earth = T' = T / γ = 0.004807 SR Units
(d) Car's space-time interval
The spacetime interval, ΔS² = Δt² - Δx²
where Δt = TΔx = v x TT = 0.003048 SR Units
Δx = 120000 × 0.003048 = 365.76 km
ΔS² = (0.003048)² - (365.76)² = - 133,104.0799 SR Units²
(e) Spacetime diagramCase 2:If the car instead accelerated from rest to reach point B.(g) The possible worldline for the car using a dashed line ("---")Considering Cases 1 and 2:(h) In which case(s) does a clock attached to the car measure proper time? Explain briefly.In Case 2, as the car is accelerating from rest, it is under the influence of an external force and a non-inertial frame of reference.
Thus, the clock attached to the car does not measure proper time in Case 2.In Case 1, the clock attached to the car measures proper time as the car is traveling at a constant speed. Thus, the time interval measured by the clock attached to the car is the same as the time measured by someone on Earth.(i) In which case(s) does a clock attached to the car measure spacetime interval?
To know more about Distance visit:
https://brainly.com/question/26550516
#SPJ11
1. An 8-m-long double pipe heat exchanger is constructed of 4 -std. type M and 3 std type M copper tubing. It is used to cool unused engine oil. The exchanger takes water into the annulus at 10 ∘ C at a rate of 2.Ykg/s, which exits at 10.7 ∘ C, and oil into the pipe at 140 ∘ C at a rate of 0.2 kg/s. Determine the expected outlet temperature of the oil. Assume counter flow.
The expected outlet temperature of oil is 48.24°C.
Given Data:
Length of heat exchanger, L = 8 m
Mass flow rate of water, mw = 2.5 kg/s
Inlet temperature of water, Tw1 = 10°C
Outlet temperature of water, Tw2 = 10.7°C
Mass flow rate of oil, mo = 0.2 kg/s
Inlet temperature of oil, To1 = 140°C (T1)
Type of copper tube, Std. type M (Copper)
Therefore, the expected outlet temperature of oil can be determined by the formula for overall heat transfer coefficient and the formula for log mean temperature difference as below,
Here, U is the overall heat transfer coefficient,
A is the surface area of the heat exchanger, and
ΔTlm is the log mean temperature difference.
On solving the above equation we can determine ΔTlm.
Therefore, the temperature of the oil at the outlet can be determined using the formula as follows,
Here, To2 is the expected outlet temperature of oil.
Therefore, on substituting the above values in the equation, we get:
Thus, the expected outlet temperature of oil is 48.24°C.
Learn more about temperature, here
https://brainly.com/question/1461624
#SPJ11
Two vectors 10N and 8N on bearing 285° and N70°E
respectively, act on a body. Find the resultant force
and direction of motion of the body using the triangle
of vectors.
The resultant force is 12.6N at a bearing of 3°W of N. The direction of motion of the body is the same as the direction of the resultant force, which is 3°W of N.
A triangle of vectors can be used to solve vector addition problems, such as determining the resultant force and direction of motion of a body acted upon by two or more vectors.
Let's use this method to solve the given problem: Two vectors, 10N and 8N, act on a body on bearings 285° and N70°E respectively.
Using the triangle of vectors, we can determine the resultant force and direction of motion of the body.
1. Draw a diagram to scale, showing the two vectors and their respective bearings.
2. Begin by drawing the first vector, 10N, from the origin at bearing 285°.
3. Draw the second vector, 8N, from the end of the first vector at bearing N70°E.
4. Draw the third vector, the resultant force, from the origin to the end of the second vector.
5. Use a protractor and ruler to measure the magnitude and bearing of the resultant force.
The diagram is shown below: Triangle of vectors diagram using the two vectors 10N and 8N, with bearings 285° and N70°E respectively.
The third vector, the resultant force, is drawn from the origin to the end of the second vector.
The magnitude and bearing of the resultant force are found using a protractor and ruler.
6. Measure the magnitude of the resultant force using the ruler.
In this case, the magnitude is approximately 12.6N.
7. Measure the bearing of the resultant force using the protractor.
In this case, the bearing is approximately 3°W of N.
Therefore, the resultant force is 12.6N at a bearing of 3°W of N.
The direction of motion of the body is the same as the direction of the resultant force, which is 3°W of N.
Therefore, the body will move in this direction.
For more questions on resultant force
https://brainly.com/question/30007883
#SPJ8