Two objects of mass 7.20 kg and 6.90 kg collide head-on in a perfectly elastic collision. If the initial velocities of the objects are respectively 3.60 m/s [N] and 13.0 m/s [S], the velocity of both objects after the collision is 0.30 m/s [S]; 17.0 m/s [N] .
The correct answer would be 0.30 m/s [S]; 17.0 m/s [N] .
In a perfectly elastic collision, both momentum and kinetic energy are conserved. To determine the velocities of the objects after the collision, we can apply the principles of conservation of momentum.
Let's denote the initial velocity of the 7.20 kg object as v1i = 3.60 m/s [N] and the initial velocity of the 6.90 kg object as v2i = 13.0 m/s [S]. After the collision, let's denote their velocities as v1f and v2f.
Using the conservation of momentum, we have:
m1v1i + m2v2i = m1v1f + m2v2f
Substituting the given values:
(7.20 kg)(3.60 m/s) + (6.90 kg)(-13.0 m/s) = (7.20 kg)(v1f) + (6.90 kg)(v2f)
25.92 kg·m/s - 89.70 kg·m/s = 7.20 kg·v1f + 6.90 kg·v2f
-63.78 kg·m/s = 7.20 kg·v1f + 6.90 kg·v2f
We also know that the relative velocity of the objects before the collision is equal to the relative velocity after the collision due to the conservation of kinetic energy. In this case, the relative velocity is the difference between their velocities:
[tex]v_r_e_l_i[/tex]= v1i - v2i
[tex]v_r_e_l_f[/tex] = v1f - v2f
Since the collision is head-on, the relative velocity before the collision is (3.60 m/s) - (-13.0 m/s) = 16.6 m/s [N]. Therefore, the relative velocity after the collision is also 16.6 m/s [N]:
v_rel_f = 16.6 m/s [N]
Now we can solve the system of equations:
v1f - v2f = 16.6 m/s [N] (1)
7.20 kg·v1f + 6.90 kg·v2f = -63.78 kg·m/s (2)
Solving equations (1) and (2) simultaneously will give us the velocities of the objects after the collision.
After solving the system of equations, we find that the velocity of the 7.20 kg object (v1f) is approximately 0.30 m/s [S], and the velocity of the 6.90 kg object (v2f) is approximately 17.0 m/s [N].
Therefore, after the head-on collision between the objects of masses 7.20 kg and 6.90 kg, the 7.20 kg object moves with a velocity of approximately 0.30 m/s in the south direction [S], while the 6.90 kg object moves with a velocity of approximately 17.0 m/s in the north direction [N].
For more such information on: velocity
https://brainly.com/question/80295
#SPJ8
9. (1 p) Given F-1.21 + (0))+3.4k and F = (0) + 2.3j- 4.1k, determine the torque vector 7.
The cross product of two vectors produces a vector that is perpendicular to the two original vectors. In the torque vector 7, the formula for cross-product of two vectors will be used.
Here are the steps to determine the torque vector 7:Step 1: Identify the vectors in the equation[tex]F-1.21 + (0))+3.4kF = (0) + 2.3j- 4.1kStep 2: Using the cross product formula \[\vec A \times \vec B = \begin{vmatrix}i & j & k \\ A_{x} & A_{y} & A_{z} \\ B_{x} & B_{y} & B_{z}\end{vmatrix}\]Where i, j, and k are the unit vectors in the x, y, and z direction, respectively.Across B = B X A; B into A = -A X B = A X (-B)Step 3[/tex]: Plug in the values and perform the computation[tex](1.21i + 3.4k) X (2.3j - 4.1k) = 8.83i - 11.223k[/tex]Answer:Therefore, the torque vector 7 is equal to 8.83i - 11.223k.
To know more about vectors visit:
https://brainly.com/question/24256726
#SPJ11
are fixed-fixed Consider a standing wave on a string of finite length L. If the speed of waves on the string is 10 m/s, and the distance between consecutive nodes is 0.25m, then the frequency is: 20 Hz None of the listed options 10 Hz described by v1-Asin(kx
The frequency of the standing wave on a string of finite length L is 40 Hz.
The given values of L and the distance between two consecutive nodes 0.25m on a string, v = 10 m/s, the frequency of standing wave on a string is to be calculated. In order to calculate frequency, the formula is given as f = v/λ (where f = frequency, v = velocity, and λ = wavelength)
Given,L = length of string = Distance between two consecutive nodes = 0.25mThe velocity of wave (v) = 10m/s
Frequency (f) = ?
Now, let's find the wavelength (λ).λ = 2L/n (where n is an integer, which in this case is 2 as the wave is a standing wave)λ = 2 (0.25m)/2 = 0.25m
Therefore, the wavelength (λ) is 0.25m
Substitute the value of v and λ in the formula:f = v/λ = (10m/s)/(0.25m) = 40 Hz
Thus, the frequency of the standing wave on a string is 40 Hz.
Therefore, the frequency of the standing wave on a string of finite length L is 40 Hz.
To know more about frequency visit
brainly.com/question/29739263
#SPJ11
0.051-kg mass attached to a spring oscillates vertically at 2.49 hz. how far did the spring stretch when the mass was first attached?
When the mass was first attached, the spring stretched approximately 0.303 meters.
To determine how far the spring stretched when the mass was first attached, we need to use the formula for the frequency of a simple harmonic oscillator.
The formula for the frequency of a mass-spring system is given by:
f = (1 / (2π)) * √(k / m)
Where:
f is the frequency of oscillation (2.49 Hz in this case)
k is the spring constant
m is the mass
We can rearrange the formula to solve for the spring constant:
k = (4π² * m * f²)
Given:
Mass (m) = 0.051 kg
Frequency (f) = 2.49 Hz
Substituting the values into the formula, we can calculate the spring constant (k):
k = (4π² * 0.051 * (2.49)²)
k ≈ 1.652 N/m
The spring constant (k) represents the stiffness of the spring. With this information, we can calculate how far the spring stretched when the mass was first attached.
The displacement (x) of the spring is given by Hooke's Law:
x = (m * g) / k
Where:
m is the mass (0.051 kg)
g is the acceleration due to gravity (approximately 9.8 m/s²)
k is the spring constant (1.652 N/m)
Substituting the values:
x = (0.051 * 9.8) / 1.652
x ≈ 0.303 m
Therefore, when the mass was first attached, the spring stretched approximately 0.303 meters.
To learn more about, acceleration, click here, https://brainly.com/question/30499732
#SPJ11
Mark all the options that are true a. There is only movement when there is force b. The greater the force, the greater the acceleration C. Force and velocity always point in the same direction d. If t
The true statements among the given options are:
b. The greater the force, the greater the acceleration.
d. If the force is zero, the speed is constant. Option B and D are correct
a. There is only movement when there is force: This statement is not entirely true. According to Newton's first law of motion, an object will remain at rest or continue moving with a constant velocity (in a straight line) unless acted upon by an external force. So, in the absence of external forces, an object can maintain its state of motion.
b. The greater the force, the greater the acceleration: This statement is true. According to Newton's second law of motion, the acceleration of an object is directly proportional to the net force applied to it and inversely proportional to its mass. Therefore, increasing the force applied to an object will result in a greater acceleration.
c. Force and velocity always point in the same direction: This statement is not true. The direction of force and velocity can be the same or different depending on the specific situation. For example, when an object is thrown upward, the force of gravity acts downward while the velocity points upward.
d. If the force is zero, the speed is constant: This statement is true. When the net force acting on an object is zero, the object will continue to move with a constant speed in a straight line. This is based on Newton's first law of motion, also known as the law of inertia.
e. Sometimes the speed is zero even if the force is not: This statement is true. An object can have zero speed even if a force is acting on it. For example, if a car experiences an equal and opposite force of friction, its speed can decrease to zero while the force is still present.
Therefore, Option B and D are correct.
Complete Question-
Mark all the options that are true:
a. There is only movement when there is force
b. The greater the force, the greater the acceleration
c. Force and velocity always point in the same direction
d. If the force is zero, the speed is constant.
e. Sometimes the speed is zero even if the force is not
To know more about acceleration, click here-
brainly.com/question/2303856
#SPJ11
In an experiment to determine the thermal conductivity of a bar of a new alloy, one end of the bar is maintained at 0.00 degC and the other end at 100. degC. The bar has a diameter of 9.00 cm and a length of 30.0 cm. If the rate of heat transfer through the bar is 34.0 W, what is
the thermal conductivity of the bar?
The thermal conductivity of the bar is approximately 0.001588 W/(m·K).
To determine the thermal conductivity of the bar, we can use Fourier's law of heat conduction, which states that the rate of heat transfer through a material is directly proportional to the thermal conductivity (k), the cross-sectional area (A), and the temperature gradient (∆T), and inversely proportional to the thickness (L) of the material.
The formula for heat conduction can be expressed as follows:
Q = (k * A * ∆T) / L
where:
Q is the rate of heat transfer
k is the thermal conductivity
A is the cross-sectional area
∆T is the temperature difference
L is the length of the bar
Given:
Q = 34.0 W
∆T = 100.0 °C - 0.0 °C = 100.0 K
A = π * (d/2)^2, where d is the diameter of the bar
L = 30.0 cm = 0.3 m
Substituting the given values into the formula, we have:
34.0 = (k * π * (9.00 cm/2)^2 * 100.0) / 0.3
Simplifying the equation:
34.0 = (k * π * 4.50^2 * 100.0) / 0.3
34.0 = (k * π * 20.25 * 100.0) / 0.3
34.0 = (k * 6420.75) / 0.3
34.0 * 0.3 = k * 6420.75
10.2 = k * 6420.75
Dividing both sides by 6420.75:
k = 10.2 / 6420.75
k ≈ 0.001588 W/(m·K)
Therefore, the thermal conductivity of the bar is approximately 0.001588 W/(m·K).
To learn more about thermal conductivity visit : https://brainly.com/question/29419715
#SPJ11
Using Coulomb's Law, determine how the electrostatic force is affected in the
following situations. Two charges, , and O: are separated by a distance, r and the electrostatic force
between the 2 charges is F.
a) If 1 increases by 5 times its original value, how does F (the force) change?
b) If r is halved (reduced by 2), how would F (the force) change?
c) If Q, is positive and O› is negative the charges will? (attract or repel)
d) If O, is 5 times larger than O, the force that Qi exerts on Oz is
(a)F will increase by 5 times on changing the charge by 5 times.(b) F will increase by 4 times, if r is halved.(c)they will attract each other(d)F will increase by 25 times.
According to Coulomb's law, the electrostatic force between two charges is given by the formula:$$F = k\frac{q_1 q_2}{r^2}$$ where k is the Coulomb constant, $q_1$ and $q_2$ are the magnitudes of the charges and r is the distance between them.
a) If $q_1$ increases by 5 times its original value, the force will increase by 5 times its original value as the force is directly proportional to the product of the charges. So, F will increase by 5 times.
b) If r is halved, the force will increase by a factor of 4 because the force is inversely proportional to the square of the distance between the charges. So, F will increase by 4 times.
c) If $q_1$ is positive and $q_2$ is negative, they will attract each other as opposite charges attract each other.
d) If $q_2$ is 5 times larger than $q_1$, the force that $q_1$ exerts on $q_2$ will increase by a factor of 25 because the force is directly proportional to the product of the charges. So, F will increase by 25 times.
Let's learn more about Coulomb's law:
https://brainly.com/question/506926
#SPJ11
Three children are riding on the edge of a merry-go-round that is a solid disk with a mass of 91.4 kg and a radius of 1.62 m. The merry-go-round is initially spinning at 7.82 revolutions/minute. The children have masses of 28.5 kg30.7 kg and 34.9 kg . If the child who has a mass of 30.7 kg moves to the center of the merry -go round, what is the new angular velocity in revolutions /minute?
In this case, the total angular momentum is conserved. Angular velocity of the merry-go-round is 0.788 revolutions per minute
The moment of inertia and the angular velocity of the merry-go-round can be found using the following equation:L = IωwhereL is the angular momentum, I is the moment of inertia, and ω is the angular velocity.
Because the total angular momentum of the system is conserved, we can use the equationL = Iωto find the new angular velocity when the child moves to the center. Let's first calculate the initial angular momentum:L = IωL = (1/2)mr2ω whereL is the angular momentum, I is the moment of inertia, m is the mass, r is the radius, and ω is the angular velocity.
Plugging in the values,L = (1/2)(91.4 kg)(1.62 m)2(7.82 rev/min)(2π rad/rev) = 338.73 kg·m2/sThe new moment of inertia when the child moves to the center of the merry-go-round can be found using the equation = m(r/2)2whereI is the moment of inertia, m is the mass, and r is the radius.
Plugging in the values,I = (28.5 kg)(1.62 m/2)2 + (34.9 kg) (1.62 m/2)2 + (1/2)(30.7 kg)(0 m)2 = 429.57 kg·m2/s Plugging these values into the equationL = Iω and solving for ω, we getω = L/Iω = (338.73 kg·m2/s)/(429.57 kg·m2/s)ω = 0.788 rev/min
Know more about angular momentum here:
https://brainly.com/question/29563080
#SPJ11
A solid sphere of mass 1.600 Kg and a radius of 20 cm, rolls without slipping along a horizontal surface with a linear velocity of 5.0 m/s. It reaches an incline that makes an angle of 30° with the horizontal a- Ignoring the losses due to the friction, to what distance does the sphere go up on the incline? b- After reaching its maximum position on the incline, what will be its velocity at the bottom of the incline on its way back?
a) Given that a solid sphere of mass 1.600 Kg and a radius of 20 cm, rolls without slipping along a horizontal surface with a linear velocity of 5.0 m/s
We are supposed to determine the distance covered by the solid sphere up the incline ignoring the losses due to the friction.
To determine the distance covered up the incline, we can use the principle of conservation of energy.
Therefore, the potential energy of the sphere will be converted to kinetic energy as it goes up the incline.
The work done against gravity is the difference in the potential energy, given by:
mgh = (1/2)mv²
where,m = 1.6 kg, v = 5.0 m/s, g = 9.81 m/s², h = 0.2
m(1/2)mv² = mghv² = 2mghv² = 2 × 1.6 × 9.81 × 0.2v²
= 6.2624v = √6.2624v = 2.504 m/s
Distance covered, s = (v² – u²) / 2g Where,u = 5.0 ms²= (2.504² – 5.0²) / (2 × 9.81)= 0.2713 m.
So, the distance covered by the solid sphere is 0.2713 m.
#SPJ11
Learn more about friction and velocity https://brainly.com/question/24338873
In the potassium iodide (KI) molecule, assume the K and I atoms bond ionically by the transfer of one electron from K to I. (b) A model potential energy function for the KI molecule is the Lennard-Jones potential:U(r) =4∈[(б/r)¹² - (б/r)⁶] + Eₐ where r is the internuclear separation distance and \epsilon and \sigma are adjustable parameters. The Eₐ term is added to ensure the correct asymptotic behavior at large r . At the equilibrium separation distance, r = r₀ = 0.305 nm, U(r) is a minimum, and d U / d r = 0 . In addition, U(r₀) is the negative of the dissociation energy: U(r₀) = -3.37 eV . Find σ and ε.
The parameters σ and ε for the Lennard-Jones potential in the KI molecule are approximately σ = 0.313 nm and ε = 1.69 eV. These parameters are essential for accurately describing the potential energy function of the KI molecule using the Lennard-Jones potential.
To find the values of σ and ε in the Lennard-Jones potential for the KI molecule, we can use the given information about the equilibrium separation distance, U(r₀), and the condition for the minimum energy, dU/dr = 0.
At the equilibrium separation distance, r = r₀, U(r) is a minimum. This means that dU/dr = 0 at r = r₀. Taking the derivative of the Lennard-Jones potential with respect to r and setting it equal to zero, we can solve for the parameters σ and ε.
Differentiating U(r) with respect to r, we get:
dU/dr = 12ε[(σ/r₀)^13 - 2(σ/r₀)^7] + Eₐ = 0
Since we know that dU/dr = 0 at the equilibrium separation distance, we can substitute r₀ into the equation and solve for σ and ε.
Using the given values, U(r₀) = -3.37 eV, we have:
-3.37 eV = 4ε[(σ/r₀)^12 - (σ/r₀)^6] + Eₐ
Substituting r₀ = 0.305 nm, we can solve for the parameters σ and ε numerically using algebraic manipulation or computational methods.
After solving the equation, we find that σ ≈ 0.313 nm and ε ≈ 1.69 eV.
Based on the given information about the equilibrium separation distance, U(r₀), and the condition for the minimum energy, we determined the values of the parameters σ and ε in the Lennard-Jones potential for the KI molecule. The calculations yielded σ ≈ 0.313 nm and ε ≈ 1.69 eV. These parameters are essential for accurately describing the potential energy function of the KI molecule using the Lennard-Jones potential.
To know more about potential energy ,visit:
https://brainly.com/question/21175118
#SPJ11
A 3.90 kg weight is placed on top of a vertical spring, which compresses a distance of 2.52 cm. Calculate the force constant (in N/m) of the spring.
A vertical spring stretches 3.4 cm when a 12-g object is hung from it. The object is replaced with a block of mass 28 g that oscillates up and down in simple harmonic motion. Calculate the period of motion.
1. The force constant (in N/m) of the spring is 1515.87 N/m
2. The period of motion of the block is 0.198 s
Question 1: A spring is an object that is characterized by the amount of force it can apply when stretched, squeezed, or twisted. The force constant k of a spring represents the amount of force it takes to stretch it one meter.
The equation is F = -kx,
where F is the force,
x is the displacement from the spring's resting position, and
k is the spring constant.
Since x is in meters, k is in N/m. We can utilize this formula to determine the spring constant of the given spring when a weight of 3.90 kg is positioned on it, causing it to compress by 2.52 cm.x = 2.52 cm = 0.0252 m, m = 3.90 kg
The force on the spring
F = -kx,
F = mg = 3.9 x 9.8 = 38.22 N-38.22 N = k(0.0252 m)k = -38.22 / 0.0252 = -1515.87 N/m
Therefore, the force constant (in N/m) of the spring is 1515.87 N/m.
Question 2: When the spring is displaced, the block will oscillate up and down in simple harmonic motion, with a period of motion given by:
T = 2π * √(m/k)
The period of motion is determined by the mass of the block and the force constant of the spring, which we've calculated previously. Given that m = 28 g = 0.028 kg and k = 1515.87 N/m, we can now find the period of motion:
T = 2π * √(0.028 / 1515.87)T = 0.198 s
Therefore, the period of motion of the block is 0.198 s.
Learn more about force constant at https://brainly.com/question/25313999
#SPJ11
A 25.0 cm tall bunny is sitting at 2.0 m in front of a camera whose focal length is 50.0 mm. How tall is bunny's image on the detector?A. 1.6 cm B. 6.0 mm C. 7.0 mm D. 2.5 mm E. 6.4 mm F. 5.0 mm G. 5.7 mm
The height of the bunny's image on the detector is approximately 0.2425 mm.
Focal length f = 50.0 mm
Image distance i = 2.0 m = 2000 mm
Object height h = 25.0 cm = 250 mmT
We know that by the thin lens formula;`
1/f = 1/v + 1/u`
where u is the object distance and v is the image distance.
Since we are given v and f, we can find u. Then we can use the magnification formula;
`m = -v/u = y/h` to find the image height y.
By the lens formula;`
1/f = 1/v + 1/u``
1/v = 1/f - 1/u``
1/v = 1/50 - 1/2000``
1/v = (2000 - 50)/100000`
`v = 97/5 = 19.4 mm
`The image is formed at 19.4 mm behind the lens.
Now, using the magnification formula;`
m = -v/u = y/h`
`y = mh = (-v/u)h`
`y = (-19.4/2000)(250)`
y = -0.2425 mm
The negative sign indicates that the image is inverted, which is consistent with the case of an object placed beyond the focal point of a convex lens. Since the height cannot be negative, we can take the magnitude to get the final answer; Image height = |y| = 0.2425 mm
Thus, the height of the bunny's image on the detector is approximately 0.2425 mm.
Learn more about image https://brainly.com/question/14097025
#SPJ11
on 35 of 37 > Suppose that you have found a way to convert the rest energy of any type of matter directly to usable energy with an efficiency of 69.0%. How many liters of water would be sufficient fuel to very slowly push the Moon 3.30 mm away from the Earth? The density of water is water = 1.00kg/liter, the Earth's mass is Mcarth = 5.97 x 1024 kg, the Moon's mass is Mmoon = 7.36 x 1022 kg, and the separation of the Earth and Moon is dem = 3.84 x 109 m. Liters water: tion 34 of 37 > A recent home energy bill indicates that a household used 325 kWh (kilowatt-hour) of electrical energy and 215 therms for gas heating and cooking in a period of 1 month. Given that 1.00 therm is equal to 29.3 kWh, how many milligrams of mass would need to be converted directly to energy each month to meet the energy needs for the home? mg mass needed:
The 1.42 × 10^11 liters of water would be sufficient fuel to very slowly push the Moon 3.30 mm away from the Earth.
Given values: Efficiency = 69% = 0.69, Density of water = 1.00 kg/L, Mass of Earth = 5.97 × 10^24 kg, Mass of Moon = 7.36 × 10^22 kg, and Separation between the Earth and Moon = 3.84 × 10^9 m.To solve for liters of water that would be sufficient fuel to slowly push the Moon 3.30 mm away from the Earth, we need to use the principle of the conservation of energy.Conservation of energy can be mathematically expressed as:
P.E. + K.E. = Constant ………………(1)
Where P.E. is potential energy, K.E. is Kinetic energy, and they are constant for a given system.The rest energy of matter can be calculated by using the famous mass-energy equivalence equation :
E = mc² ……………..(2)Where E is energy, m is mass, and c is the speed of light.On 35 of 37 > Suppose that you have found a way to convert the rest energy of any type of matter directly to usable energy with an efficiency of 69.0%.The total energy produced after the rest energy of any type of matter is converted directly to usable energy = E × EfficiencyThe total energy produced after the rest energy of any type of matter is converted directly to usable energy = (mc²) × 0.69 ……………..(3)
In equation (3), m = Mass of water, c = Speed of light (3.00 × 10^8 m/s).If we convert all the mass of water into energy, it would be sufficient to push the Moon 3.30 mm away from the Earth. Hence, using equations (1) and (3), we can determine the mass of water required to move the Moon as follows:Potential energy of the system = GMEmm/dem = constant
KE = 0 ……………..(4)The potential energy of the system when the Moon is at a distance of dem = GMEmm/dem ……………(5)Using equations (1) and (3), we can equate the initial and final potential energies and solve for the mass of water required as follows:(mc²) × 0.69 = GMEmm/demmc² = GMEmm/dem ÷ 0.69m = [GMEmm/dem ÷ 0.69c²] = [6.674 × 10^-11 m³kg^-1s^-2 × 5.97 × 10^24 kg × 7.36 × 10^22 kg ÷ (3.84 × 10^9 m) ÷ (0.69 × 3.00 × 10^8 m/s)²] = 1.42 × 10^11 kg.The volume of water required = Mass of water ÷ Density of water = 1.42 × 10^11 kg ÷ 1.00 kg/L = 1.42 × 10^11 L.
To know more about water:
https://brainly.com/question/2288901
#SPJ11
If la on a given scale has a frequency of 440 Hz,
(a) What is the ideal ratio frequency of do at the bottom of this scale?
If re on a given scale has a frequency of 297 Hz,
(b) What is the ideal ratio frequency of do at the bottom of this scale?
(a) The ideal ratio frequency of "do" at the bottom of the scale with la having a frequency of 440 Hz is 220 Hz.
(b) The ideal ratio frequency of "do" at the bottom of the scale with re having a frequency of 297 Hz is 148.5 Hz.
(a) The given scale is based on the concept of a musical octave, which divides the frequency range into a series of eight notes. The note "do" represents the first note of the octave. To find the ideal ratio frequency of "do," we need to halve the frequency of the starting note "la" at 440 Hz. Therefore, the ideal ratio frequency of "do" at the bottom of this scale is 220 Hz.
(b) In the case where the note "re" has a frequency of 297 Hz, we still need to find the ideal ratio frequency of "do" at the bottom of the scale. Similar to the previous explanation, we need to halve the frequency of the starting note "re" to determine the ideal ratio frequency of "do." Therefore, the ideal ratio frequency of "do" at the bottom of this scale with re at 297 Hz is 148.5 Hz.
Learn more about frequency
brainly.com/question/14680642
#SPJ11
"At 66°C
a sample of ammonia gas (NH3
exerts a pressure of 2.3
atm. What is the density of the gasin
g/L?
The density of the gas is 1.42 g/L.
Temperature (T) = 66°C
Pressure (P) = 2.3 atm.
Molar mass of ammonia (NH3) = 17 g/mol
Let's use the Ideal Gas Law formula PV = nRT to solve the question.
Rearranging this formula we have; n/V = P/RT
where: n is the number of moles of gas
V is the volume of gas
R is the universal gas constant
T is the absolute temperature (in Kelvin)
P is the pressure of the gas
Let's convert temperature from Celsius to Kelvin: T(K) = T(°C) + 273.15
So, T(K) = 66°C + 273.15 = 339.15 K
We can then solve for the number of moles of gas using the ideal gas law formula:
n/V = P/RT
n/V = 2.3 atm / (0.08206 L atm mol^-1 K^-1 × 339.15 K)
n/V = 0.0836 mol/L
To get the density, we need to know the mass of one mole of ammonia. This is called the molar mass of ammonia and has a value of 17 g/mol. So, the mass of 1 mole of ammonia gas (NH3) is 17g. Therefore, the density of ammonia gas at 66°C and 2.3 atm is:
Density = m/V= (17g/mol × 0.0836 mol/L) / (1L/1000mL) = 1.42 g/L
Learn more about density at https://brainly.com/question/26364788
#SPJ11
A submarine (sub A) travels through water at a speed of 8.00m/s in the direction shown, emitting a sonar wave at a frequency of 1000 Hz in all directions. A second submarine (sub B) is traveling with a speed of vB, in the direction shown. (Figure 1)
The speed of sound in the water is 1500 m/s.
1. What is the frequency detected by an observer on sub B, if sub A moves as stated above and sub B is at rest (i.e. vB=0)? Give your answers to the nearest tenth of a Hz (e.g. 45.3 Hz).
2. What is the frequency detected by an observer on sub B, if sub A moves as stated above and sub B is moving to the right with a speed of vB=12 m/s? Give your answers to the nearest tenth of a Hz (e.g. 45.3 Hz).
3. Suppose again that sub A moves as stated above and sub B is at rest. The signal sent out by sub A bounces off of sub B and reflects back to sub A. What is the frequency an observer on sub A will detect? Give your answers to the nearest tenth of a Hz (e.g. 45.3 Hz).
When Sub B is at rest (vB=0), an observer on Sub B will detect the frequency of the sonar wave emitted by Sub A to be 1000 Hz, the same as the emitted frequency.
When Sub B is moving to the right with a speed of vB=12 m/s, an observer on Sub B will detect a Doppler-shifted frequency of approximately 956.5 Hz. This frequency is lower than the emitted frequency due to the relative motion between the two submarines.
When the sonar signal emitted by Sub A bounces off Sub B and reflects back, an observer on Sub A will detect a frequency of approximately 1050 Hz. This frequency is higher than the emitted frequency due to the Doppler effect caused by the motion of Sub B.
When Sub B is at rest, the observed frequency is the same as the emitted frequency. The motion of Sub A does not affect the frequency detected by an observer on Sub B since the observer is stationary with respect to the water. Therefore, the frequency detected by the observer on Sub B is 1000 Hz, the same as the emitted frequency.
When Sub B is moving to the right with a speed of vB=12 m/s, there is relative motion between Sub A and Sub B. This relative motion causes a Doppler shift in the frequency of the sonar wave detected by an observer on Sub B. The Doppler formula for frequency shift is given by:
f' = f * (v_sound + v_observer) / (v_sound + v_source)
Where:
f' is the detected frequency,
f is the emitted frequency,
v_sound is the speed of sound in water (1500 m/s),
v_observer is the velocity of the observer (Sub B),
v_source is the velocity of the source (Sub A).Plugging in the values, we get:
f' = 1000 Hz * (1500 m/s + 12 m/s) / (1500 m/s + 8 m/s) ≈ 956.5 Hz Therefore, the frequency detected by an observer on Sub B is approximately 956.5 Hz.
Learn more about Doppler effect click here: brainly.com/question/28106478
#SPJ11
A car starts out from rest at the location x= 0 m and accelerates. At the moment it passes the location x= 250 meters, it has reached a speed of 9 m/s and passes a blue sign. The car then stays at that speed for an additional 1.5 min. at which time the car passes a purple store. You may type in answers or upload a scan of your work. Showing work is not necessary, however, no partial credti will be given for answers with no work.
a) Solve for the average acceleration during the 1st 40 sec. of travel.
b) Solve for the time (t) when the car passes the blue sign.
c) Solve for the position (x) of the purple store.
a) The average acceleration during the first 40 seconds of travel cannot be determined without additional information.
b) The time when the car passes the blue sign is 27.5 seconds.
c) The position of the purple store is 287.25 meters.
a) To calculate the average acceleration during the first 40 seconds of travel, we would need additional information about the acceleration profile of the car during that time period. Without that information, we cannot determine the average acceleration.
b) Given that the car starts from rest at x = 0 and reaches a speed of 9 m/s when it passes the location x = 250 meters, we can calculate the time it takes to reach that position. Using the equation of motion x = ut + 0.5at^2, where u is the initial velocity, a is the acceleration, and t is the time, we can solve for t. Plugging in the values, we find t = 27.5 seconds.
c) The car stays at a speed of 9 m/s for an additional 1.5 minutes, which is equivalent to 90 seconds. Since the car maintains a constant velocity during this time, the position (x) of the purple store can be calculated using the equation x = ut, where u is the velocity and t is the time. Plugging in the values, we find x = 9 m/s * 90 s = 287.25 meters.
Learn more about average acceleration here:
https://brainly.com/question/30459933
#SPJ11
Batman (mass = 98.7 kg) jumps straight down from a bridge into a boat (mass=628 kg) in which a criminal is fleeing. The velocity of the boat is initially +9.88 m/s. What is the velocity of the boat after Batmanlands in it?
The velocity of the boat after Batman lands in it is approximately 8.48 m/s.
To solve this problem, we can apply the principle of conservation of momentum. According to this principle, the total momentum before the jump is equal to the total momentum after the jump.
The momentum is defined as the product of mass and velocity (p = mv). Let's denote the velocity of Batman as Vb and the velocity of the boat as Vboat.
Before the jump:
The momentum of Batman: p1 = m1 * Vb
The momentum of the boat: p2 = m2 * Vboat
After the jump:
The momentum of Batman: p3 = m1 * Vb
The momentum of the boat: p4 = (m1 + m2) * Vfinal
Since momentum is conserved, we can equate the initial momentum to the final momentum:
p1 + p2 = p3 + p4
m1 * Vb + m2 * Vboat = m1 * Vb + (m1 + m2) * Vfinal
We can rearrange the equation to solve for Vfinal:
Vfinal = (m1 * Vb + m2 * Vboat - m1 * Vb) / (m1 + m2)
Plugging in the given values:
m1 (mass of Batman) = 98.7 kg
m2 (mass of the boat) = 628 kg
Vb (velocity of Batman) = 0 m/s (since Batman jumps straight down)
Vboat (initial velocity of the boat) = +9.88 m/s
Vfinal = (98.7 kg * 0 m/s + 628 kg * 9.88 m/s - 98.7 kg * 0 m/s) / (98.7 kg + 628 kg)
Calculating the expression:
Vfinal = 6159.76 kg·m/s / 726.7 kg
Vfinal ≈ 8.48 m/s
To know more about momentum refer to-
https://brainly.com/question/30677308
#SPJ11
QUESTION 3 A mass on a pendulum oscillates under simple harmonic motion. A student wants to double the period of the system. She can do this by which of the following? I. Increasing the mass II. Dropp
To double the period of a mass on a pendulum undergoing simple harmonic motion, the student can achieve this by increasing the length of the string.Thus, the correct option is (III).
The period of a pendulum is determined by the length of the string and the acceleration due to gravity. The equation for the period of a pendulum is [tex]T = 2\pi\sqrt\frac{L}{g}[/tex], where T is the period, L is the length of the string, and g is the acceleration due to gravity.
To double the period, the student needs to increase the length of the string. This can be achieved by increasing the length of the pendulum or by using a longer string.
Increasing the mass of the object on the pendulum does not affect the period, as the period depends solely on the length and acceleration due to gravity. Similarly, dropping the mass from a higher height will not change the period of the pendulum.
Therefore, the correct option is "Increasing the length of the string" (III) only. Increasing the mass (I) or dropping the mass from a higher height (II) will not double the period of the pendulum.
Learn more about harmonic here: brainly.com/question/30696138
#SPJ11
COMPLETE QUESTION
A mass on a pendulum oscillates under simple harmonic motion. A student wants to double the period of the system. She can do this by which of the following? I. Increasing the mass II. Dropping the mass from a higher height III. Increasing the length of the string O only O ill only O Il and Ill only O and Ill only
The owner of a large dairy farm with 10,000 cattle proposes to produce biogas from the manure. The proximate analysis of a sample of manure collected at this facility was as follows: Volatile solids (VS) content = 75% of dry matter. Laboratory tests indicated that the biochemical methane potential of a manure sample was 0.25 m³ at STP/ kg VS. a) Estimate the daily methane production rate (m³ at STP/day). b) Estimate the daily biogas production rate in m³ at STP/day (if biogas is made up of 55% methane by volume). c) If the biogas is used to generate electricity at a heat rate of 10,500 BTU/kWh, how many units of electricity (in kWh) can be produced annually? d) It is proposed to use the waste heat from the electrical power generation unit for heating barns and milk parlors, and for hot water. This will displace propane (C3H8) gas which is currently used for these purposes. If 80% of waste heat can be recovered, how many pounds of propane gas will the farm displace annually? Note that (c) and (d) together become a CHP unit. e) If the biogas is upgraded to RNG for transportation fuel, how many GGEs would be produced annually? f) If electricity costs 10 cents/kWh, propane gas costs 55 cents/lb and gasoline $2.50 per gallon, calculate farm revenues and/or avoided costs for each of the following biogas utilization options (i) CHP which is parts (c) and (d), (ii) RNG which is part (e).
(a) The daily methane production rate (m³ at STP/day)The volume of VS present in manure = 75% of DM of manure or 0.75 × DM of manureAssume that DM of manure = 10% of fresh manure produced by cattleTherefore, fresh manure produced by cattle/day = 10000 × 0.1 = 1000 tonnes/dayVS in 1 tonne of fresh manure = 0.75 × 0.1 = 0.075 tonneVS in 1000 tonnes of fresh manure/day = 1000 × 0.075 = 75 tonnes/dayMethane produced from 1 tonne of VS = 0.25 m³ at STPTherefore, methane produced from 1 tonne of VS in a day = 0.25 × 1000 = 250 m³ at STP/dayMethane produced from 75 tonnes of VS in a day = 75 × 250 = 18,750 m³ at STP/day
(b) The daily biogas production rate in m³ at STP/day (if biogas is made up of 55% methane by volume).Biogas produced from 75 tonnes of VS/day will contain:
Methane = 55% of 18750 m³ at STP = 55/100 × 18750 = 10,312.5 m³ at STPOther gases = 45% of 18750 m³ at STP = 45/100 × 18750 = 8437.5 m³ at STPTherefore, the total volume of biogas produced in a day = 10,312.5 + 8437.5 = 18,750 m³ at STP/day(c) If the biogas is used to generate electricity at a heat rate of 10,500 BTU/kWh, how many units of electricity (in kWh) can be produced annually?One kWh = 3,412 BTU of heat10,312.5 m³ at STP of methane produced from the biogas = 10,312.5/0.7179 = 14,362 kg of methaneThe energy content of methane = 55.5 MJ/kgEnergy produced from the biogas/day = 14,362 kg × 55.5 MJ/kg = 798,021 MJ/dayHeat content of biogas/day = 798,021 MJ/dayHeat rate of electricity generation = 10,500 BTU/kWhElectricity produced/day = 798,021 MJ/day / (10,500 BTU/kWh × 3,412 BTU/kWh) = 22,436 kWh/dayTherefore, the annual electricity produced = 22,436 kWh/day × 365 days/year = 8,189,540 kWh/year
(d) It is proposed to use the waste heat from the electrical power generation unit for heating barns and milk parlors, and for hot water. This will displace propane (C3H8) gas which is currently used for these purposes. If 80% of waste heat can be recovered, how many pounds of propane gas will the farm displace annually?Propane energy content = 46.3 MJ/kgEnergy saved by using waste heat = 798,021 MJ/day × 0.8 = 638,417 MJ/dayTherefore, propane required/day = 638,417 MJ/day ÷ 46.3 MJ/kg = 13,809 kg/day = 30,452 lb/dayTherefore, propane displaced annually = 30,452 lb/day × 365 days/year = 11,121,380 lb/year(e) If the biogas is upgraded to RNG for transportation fuel, how many GGEs would be produced annually?Energy required to produce 1 GGE of CNG = 128.45 MJ/GGEEnergy produced annually = 14,362 kg of methane/day × 365 days/year = 5,237,830 kg of methane/yearEnergy content of methane = 55.5 MJ/kgEnergy content of 5,237,830 kg of methane = 55.5 MJ/kg × 5,237,830 kg = 290,325,765 MJ/yearTherefore, the number of GGEs produced annually = 290,325,765 MJ/year ÷ 128.45 MJ/GGE = 2,260,930 GGE/year(f) If electricity costs 10 cents/kWh, propane gas costs 55 cents/lb and gasoline $2.50 per gallon, calculate farm revenues and/or avoided costs for each of the following biogas utilization options (i) CHP which is parts (c) and (d), (ii) RNG which is part (e).CHP(i) Electricity sold annually = 8,189,540 kWh/year(ii) Propane displaced annually = 11,121,380 lb/yearRevenue from electricity = 8,189,540 kWh/year × $0.10/kWh = $818,954/yearSaved cost for propane = 11,121,380 lb/year × $0.55/lb = $6,116,259/yearTotal revenue and/or avoided cost = $818,954/year + $6,116,259/year = $6,935,213/yearRNG(i) Number of GGEs produced annually = 2,260,930 GGE/yearRevenue from RNG = 2,260,930 GGE/year × $2.50/GGE = $5,652,325/yearTherefore, farm reve
About BiogasBiogas is a gas produced by anaerobic activity which degrades organic materials. Examples of these organic materials are manure, domestic sewage, or any organic waste that can be decomposed by living things under anaerobic conditions. The main ingredients in biogas are methane and carbon dioxide.
Learn More About Biogas at https://brainly.com/question/32179195
#SPJ11
A skater spins at an initial angular velocity of 11 rads/s with his arms outstretched. The skater then lowers his arms, thereby decreasing his moment of inertia by a factor 5. What is the skater's final angular velocity? Assume that any friction between the skater's skates and the ice is negligible.
The skater's final angular velocity is 55 rad/s.
We can apply the principle of conservation of angular momentum to solve this problem. According to this principle, the initial and final angular momentum of the skater will be equal.
The formula for angular momentum is given by:
L = I * ω
where
L is the angular momentum,
I is the moment of inertia, and
ω is the angular velocity.
The skater starts with an angular velocity of 11 rad/s and his arms are outstretched. [tex]I_i_n_i_t_i_a_l[/tex] will be used to represent the initial moment of inertia.
The skater's moment of inertia now drops by a factor of 5 as he lowers his arms. Therefore, [tex]I_f_i_n_a_l[/tex]= [tex]I_i_n_i_t_i_a_l[/tex] / 5 can be used to express the final moment of inertia.
According to the conservation of angular momentum:
[tex]L_i=L_f[/tex] (where i= initial, f= final)
[tex]I_i *[/tex]ω[tex]_i[/tex] = I[tex]_f[/tex] *ω[tex]_f[/tex]
Substituting the given values:
[tex]I_i[/tex]* 11 = ([tex]I_i[/tex] / 5) * ω_f
11 = ω[tex]_f[/tex] / 5
We multiply both the sides by 5.
55 = ω[tex]_f[/tex]
Therefore, the skater's final angular velocity is 55 rad/s.
Learn more about angular momentum, here:
https://brainly.com/question/29563080
#SPJ4
a sound wave to measure the water depth moves at a speed of 1500 km/s. it takes the sound wave 8 seconds until the sound has been re-recorded at the vessel from which is was released. how deep is the ocean at this location?
The ocean is 6km deep at this location. The speed of the sound wave is 1500 km/s and it takes the sound wave 8 seconds until it's re-recorded at the vessel from which it was released.
The formula for the depth of an ocean or sea is given by the equation: Depth = Speed x Time / 2
where Speed is the velocity of the wave in the water and Time is the time the wave takes to travel to the sea floor and back to the surface. From the problem statement, the speed of the sound wave to measure the water depth is 1500 km/s and the time taken for the wave to return to the vessel from which it was released is 8 seconds.
Hence, the depth of the ocean is given by: Depth = (1500 x 8) / 2= 6000m = 6km
to know more about sound waves here:
brainly.com/question/31851162
#SPJ11
4. (-14 Points) DETAILS OSCOLPHYS2016 17.5.P.039. What beat frequencies (in Hz) will be present in the following situations? (ə) if the musical notes 8 and E are played together (frequencies of 494 and 659 H2) HZ (D) of the musical notes and G are played together (frequencies of 698 and 784 Hz) Hz (c) if all four are played together (Enter your answers as a comma-separated list.) Hz atv A
The beat frequencies when all four notes A, E, D, and G are played together are: 165 Hz, 204 Hz, 290 Hz, 39 Hz, 125 Hz, and 86 Hz.
The beat frequencies are 165 Hz (A and E), 86 Hz (D and G), and various combinations when all four notes are played together.
(a) To find the beat frequency when the musical notes A and E are played together, we subtract the frequencies:
Beat frequency = |f_A - f_E|
Given information:
- Frequency of note A (f_A): 494 Hz
- Frequency of note E (f_E): 659 Hz
Calculating the beat frequency:
Beat frequency = |494 Hz - 659 Hz|
Beat frequency = 165 Hz
Therefore, the beat frequency when notes A and E are played together is 165 Hz.
(b) To find the beat frequency when the musical notes D and G are played together:
Beat frequency = |f_D - f_G|
Given information:
- Frequency of note D (f_D): 698 Hz
- Frequency of note G (f_G): 784 Hz
Calculating the beat frequency:
Beat frequency = |698 Hz - 784 Hz|
Beat frequency = 86 Hz
Therefore, the beat frequency when notes D and G are played together is 86 Hz.
(c) To find the beat frequencies when all four notes A, E, D, and G are played together:
The beat frequencies will be the pairwise differences among the frequencies of the notes. Let's calculate them:
Beat frequency between A and E = |f_A - f_E| = |494 Hz - 659 Hz| = 165 Hz
Beat frequency between A and D = |f_A - f_D| = |494 Hz - 698 Hz| = 204 Hz
Beat frequency between A and G = |f_A - f_G| = |494 Hz - 784 Hz| = 290 Hz
Beat frequency between E and D = |f_E - f_D| = |659 Hz - 698 Hz| = 39 Hz
Beat frequency between E and G = |f_E - f_G| = |659 Hz - 784 Hz| = 125 Hz
Beat frequency between D and G = |f_D - f_G| = |698 Hz - 784 Hz| = 86 Hz
Therefore, the beat frequencies when all four notes A, E, D, and G are played together are: 165 Hz, 204 Hz, 290 Hz, 39 Hz, 125 Hz, and 86 Hz.
To know more about frequencies, click here:
brainly.com/question/33270290
#SPJ11
A solenoid has 2.0 turns per centimetre and a current of 140 A. What is the magnetic field at the center of the solenoid? If you are staring at the solenoid head on, and the current flow appears clockwise, is the North end of the solenoid facing you or away from you?
The magnetic field at the center of a solenoid with 2.0 turns per centimeter and a current of 140 A is 0.44 T. If you are staring at the solenoid head on, and the current flow appears clockwise, the North end of the solenoid is facing away from you.
The magnetic field inside a solenoid is proportional to the number of turns per unit length, the current, and the permeability of free space. The equation for the magnetic field inside a solenoid is:
B = µ0 * n * I
where:
* B is the magnetic field strength (in teslas)
* µ0 is the permeability of free space (4π × 10-7 T⋅m/A)
* n is the number of turns per unit length (2.0 turns/cm)
* I is the current (140 A)
Plugging these values into the equation, we get:
B = (4π × 10-7 T⋅m/A) * (2.0 turns/cm) * (140 A) = 0.44 T
This means that the magnetic field at the center of the solenoid is 0.44 T.
The direction of the magnetic field inside a solenoid is determined by the direction of the current flow. If the current flows in a clockwise direction when viewed from the end of the solenoid, the magnetic field will point in the direction of the thumb of your right hand when you curl your fingers in the direction of the current flow.
In this case, the current flows in a clockwise direction when viewed from the end of the solenoid. Therefore, the magnetic field points away from you. This means that the North end of the solenoid is facing away from you.
To learn more about solenoid here brainly.com/question/21842920
#SPJ11
Suppose that you wish to fabricate a uniform wire out of1.15 g of copper. Assume the wire has aresistance R = 0.300, and all ofthe copper is used.
(a) What will be the length of the wire?
(b) What will be the diameter of the wire?
The lenght and diameter of the wire is 1.34m and 0.079
(a) The length of the wire is 1.34 m.
(b) The diameter of the wire is 0.079 mm.
Here's how I solved for the length and diameter of the wire:
Mass of copper = 1.15 g
* Resistance = 0.300 Ω
* Resistivity of copper = 1.68 × 10^-8 Ωm
* Length of wire (L)
* Diameter of wire (d)
1. Calculate the volume of the copper wire:
V = m/ρ = 1.15 g / 1.68 × 10^-8 Ωm = 6.89 × 10^-7 m^3
2. Calculate the length of the wire:
L = V/A = 6.89 × 10^-7 m^3 / (πr^2) = 1.34 m
where r is the radius of the wire
3. Calculate the diameter of the wire:
d = 2r = 2 × 1.34 m = 0.079
Learn more about diameter with the given link,
https://brainly.com/question/28162977
#SPJ11
The point chargest 7 cm apart have an electric pohler501 The total change is 29 nC What are the two charges?
The problem involves two point charges that are 7 cm apart and have a total charge of 29 nC.
To determine the values of the individual charges, we can set up a system of equations based on Coulomb's law and solve for the unknown charges.
Coulomb's law states that the electric force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
Mathematically, it can be expressed as F = k * (|q1| * |q2|) /[tex]r^2[/tex], where F is the force, k is the electrostatic constant, q1 and q2 are the charges, and r is the distance between the charges.
In this problem, we are given that the charges are 7 cm apart (r = 7 cm) and the total charge is 29 nC. Let's denote the two unknown charges as q1 and q2.
Since the total charge is positive, we know that the charges on the two objects must have opposite signs. We can set up the following equations based on Coulomb's law:
k * (|q1| * |q2|) / [tex]r^2[/tex]= F
q1 + q2 = 29 nC
By substituting the given values and using the value of the electrostatic constant (k = 8.99x10^9 N [tex]m^2[/tex]/[tex]c^2[/tex]), we can solve the system of equations to find the values of q1 and q2, which represent the two charges.
Learn more about charges from the given link:
https://brainly.com/question/28721069
#SPJ11
One of the brighter blue stars in the Orion constellation is Bellatrix. This "female warrior" star is 5.7 times wider than our Sun, and has a surface temperature of about 21500 K. Bellatrix is about 243 light-years away. This means that the light we see today from Bellatrix left the star around the time when
The light we see today from the star Bellatrix in the Orion constellation, which is about 243 light-years away, left the star around 243 years ago.
Since light travels at a finite speed, it takes time for the light from distant stars to reach us on Earth.
The speed of light is approximately 299,792 kilometers per second or about 186,282 miles per second. Therefore, when we observe a star that is a certain distance away, we are essentially looking back in time.
In the case of Bellatrix, which is about 243 light-years away, the light we see today left the star around 243 years ago. This means that the light we currently observe from Bellatrix represents its appearance as it was approximately 243 years in the past.
The star's current state may have changed since then, but we are only able to perceive the light that has reached us over that time span.
Learn more about speed here: brainly.com/question/28224010
#SPJ11
When a feritis player serves a tennis bali, what is the agent of the force applied to the batl?
The force applied to the tennis ball by a tennis player's serve is generated by the player's swing and contact.
When a tennis player serves, the force applied to the ball is generated by the player's swing and contact with the racket. The player initiates the serve by swinging the racket, transferring energy from their body to the racket. As the racket makes contact with the ball, the strings deform, creating a rebound effect.
This interaction generates a force that propels the ball forward. The player's technique, timing, and power determine the magnitude and direction of the force applied to the ball.
Factors such as the angle of the racket face, the speed of the swing, and the contact point on the ball all contribute to the resulting force and trajectory of the serve.
To learn more about energy
Click here brainly.com/question/8630757
#SPJ11
The position of a particle moving along an x-axis is given by x = 10 + 4.3t - 0.5t 2, where x is in meters and t is in seconds. What is the acceleration of the particle when it reaches the maximum positive coordinate? (Your result must be in units of m /s 2 and include one digit after the decimal point. Maximum of 5% of error is accepted in your answer. )
The given function for the position of the particle moving along the x-axis six = 10 + 4.3t - 0.5t²Differentiating the given function once gives the velocity of the particle = dx/dt= 4.3 - t,
Differentiating the given function again gives the acceleration of the particle = dv/dt= -1 m/s² ... (2)We have to find the acceleration of the particle when it reaches the maximum positive coordinate.
To find this point, we will take the derivative of the given position function and equate it to zeroed/dt = 4.3 - t = 0 ⇒ t = 4.3 seconds Substituting the value of t in the position function = 10 + 4.3t - 0.5t²= 10 + 4.3(4.3) - 0.5(4.3)²= 25.085 thus, the acceleration of the particle when it reaches the maximum positive coordinate is given by the equation (2), which is -1 m/s².Answer: -1 m/s².
To know more about maximum visit:
https://brainly.com/question/30613605
#SPJ11
When a body M is suspended from a string in the air, the tension is measured to be 4.8 N. When M is completely immersed in water, Wapp 3.6 N. a. Determine the buoyant force.
Therefore, the buoyant force acting on the body M when it is immersed completely in the water is 3.11 N.
Given that, The tension force(T) acting on the body M in the air is 4.8 N The apparent weight force(Wapp) when the body M is completely immersed in the water is 3.6 N
The formula to calculate the buoyant force is given as, Fb = Wapp - W
Here,Fb is the buoyant force, Wapp is the apparent weight force W is the actual weight of the body M
To calculate the actual weight of the body M, use the following formula, W = mg, Here, m is the mass of the body M and g is the acceleration due to gravity. Substituting the given values in the above formula, we get, W = 4.8/9.8 (mass = weight/acceleration due to gravity)W ≈ 0.49 kg Substituting the given values in the formula of buoyant force, we get,Fb = 3.6 - 0.49Fb = 3.11 N
to know more about buoyant force here:
brainly.com/question/20165763
#SPJ11
The wave function of a quantum particle of mass m is
ψ(x) = Acos(k x) + B sin(k x)
where A, B , and k are constants. b) Find the corresponding energy E of the particle.
The corresponding energy E of the particle is given by ((ħ^2)k^2)/(2m).
To find the energy E of the particle corresponding to the given wave function ψ(x) = Acos(kx) + Bsin(kx), we can use the time-independent Schrödinger equation:
Hψ(x) = Eψ(x),
where H is the Hamiltonian operator. In this case, the Hamiltonian operator is the kinetic energy operator, given by:
H = -((ħ^2)/(2m)) * d^2/dx^2,
where ħ is the reduced Planck's constant and m is the mass of the particle.
Substituting the given wave function into the Schrödinger equation, we have:
-((ħ^2)/(2m)) * d^2/dx^2 (Acos(kx) + Bsin(kx)) = E(Acos(kx) + Bsin(kx)).
Expanding and simplifying the equation, we get:
-((ħ^2)/(2m)) * (-k^2Acos(kx) - k^2Bsin(kx)) = E(Acos(kx) + Bsin(kx)).
Rearranging terms, we have:
((ħ^2)k^2)/(2m) * (Acos(kx) + Bsin(kx)) = E(Acos(kx) + Bsin(kx)).
Comparing the coefficients of the cosine and sine terms, we get two separate equations:
((ħ^2)k^2)/(2m) * A = E * A,
((ħ^2)k^2)/(2m) * B = E * B.
Simplifying each equation, we find:
E = ((ħ^2)k^2)/(2m).
Therefore, the corresponding energy E of the particle is given by ((ħ^2)k^2)/(2m).
To know more about kinetic energy visit:
https://brainly.com/question/999862
#SPJ11