The displacement (in m) of a particle moving in a straight line at a constant velocity of 39 m/s between t=0 and t=7.2 s is 280.8 m in the positive direction.
Velocity is defined as the rate of change of displacement with respect to time. When a body moves with a constant velocity, its displacement is calculated using the formula; d = vt where, d is the displacement, v is the velocity, and t is the time taken.
Therefore, the displacement of the particle is calculated as;
d = vt
= 39 × 7.2
= 280.8 m
The direction of the particle is given as positive direction, hence the displacement is 280.8 m in the positive direction. An acceleration is said to be constant when there is uniform change in velocity over a period of time. The acceleration of the particle is given as 32 m/s² and initial velocity is given as 27 m/s.
The position of the particle at time t is calculated using the formula;
X = xo + vot + 1/2 at²
where, X is the position of the particle, xo is the initial position, vo is the initial velocity, t is the time taken, and a is the acceleration.
Here, xo is given as 0, vo is given as 27 m/s, a is given as 32 m/s², and
t is given as 0.X = 0 + 27(0) + 1/2(32)(0)X
= 0
The particle's position at t=0 is 0 m.
To know velocity visit :
https://brainly.com/question/30559316
#SPJ11
A slab of plastic rests on a slab of glass. A ray of light in the plastic crosses the interface between the plastic and the glass with the result that the ray bends toward the normal. What must be true about the indices of refraction in these materials? Write your answer in terms of inequalities of
the index's of refraction.
For the ray of light in the plastic to bend toward the normal as it crosses into the glass, the index of refraction of the plastic (n1) must be greater than the index of refraction of the glass (n2), expressed as n1 > n2.
The bending of a ray of light toward the normal as it crosses the interface between two media indicates that the ray is transitioning from a medium with a higher index of refraction to a medium with a lower index of refraction.
In this case, let's denote the index of refraction of the plastic as n1 and the index of refraction of the glass as n2. The bending of the light toward the normal occurs when n1 > n2.
This can be explained by Snell's law, which states that the angle of refraction of a ray of light passing from one medium to another is determined by the indices of refraction of the two media. According to Snell's law, when light travels from a medium with a higher index of refraction to a medium with a lower index of refraction, it bends toward the normal.
To know more about refraction refer here:
https://brainly.com/question/13088981#
#SPJ11
A compass needle has a magnetic dipole moment of |u| = 0.75A.m^2 . It is immersed in a uniform magnetic field of |B| = 3.00.10^-5T. How much work is required to rotate this compass needle from being aligned with the magnetic field to pointing opposite to the magnetic field?
The work required to rotate this compass needle from being aligned with the magnetic field to pointing opposite to the magnetic field is 4.50 × 10⁻⁴ J.
Magnetic dipole moment of a compass needle |u| = 0.75 A·m², magnetic field |B| = 3.00 × 10⁻⁵ T. We need to find out how much work is required to rotate this compass needle from being aligned with the magnetic field to pointing opposite to the magnetic field.Work done on a magnetic dipole is given by
W = -ΔU
where ΔU = Uf - Ui and U is the potential energy of a dipole in an external magnetic field.The potential energy of a magnetic dipole in an external magnetic field is given by
U = -u·B
Where, u is the magnetic dipole moment of the compass needle and B is the uniform magnetic field.
W = -ΔU
Uf - Ui = -u·Bf + u·Bi
where Bf is the final magnetic field, Bi is the initial magnetic field and u is the magnetic dipole moment of the compass needle.
|Bf| = |Bi| = |B|
Work done to rotate the compass needle is
W = -ΔU= -u·Bf + u·Bi= -u·B - u·B= -2u·B
Substituting the given values, we have
W = -2u·B= -2 × 0.75 A·m² × 3.00 × 10⁻⁵ T= -4.50 × 10⁻⁴ J
The negative sign indicates that the external magnetic field is doing work on the compass needle in rotating it from being aligned with the magnetic field to pointing opposite to the magnetic field.
Thus, the work required to rotate this compass needle from being aligned with the magnetic field to pointing opposite to the magnetic field is 4.50 × 10⁻⁴ J.
Learn more about work at: https://brainly.com/question/28356414
#SPJ11
(5 points) In a harmonic oscillator, the spacing energy AE between the quantized energy levels is 4 eV. What is the energy of the ground state? O a 4eV Oblev O c. 2 eV O d. 0 eV
the energy of the ground state in a harmonic oscillator with a spacing energy of 4 eV is approximately 12.03 eV. None of the provided answer options (a, b, c, d) matches this result.
In a harmonic oscillator, the spacing energy between quantized energy levels is given by the formula:
ΔE = ħω,
where ΔE is the spacing energy, ħ is the reduced Planck's constant (approximately 6.626 × 10^(-34) J·s), and ω is the angular frequency of the oscillator.
ΔE = 4 eV × 1.602 × 10^(-19) J/eV = 6.408 × 10^(-19) J.
6.408 × 10^(-19) J = ħω.
E₁ = (n + 1/2) ħω,
where E₁ is the energy of the ground state.
E₁ = (1 + 1/2) ħω = (3/2) ħω.
E₁ = (3/2) × 6.408 × 10^(-19) J.
E₁ = (3/2) × 6.408 × 10^(-19) J / (1.602 × 10^(-19) J/eV) = 3 × 6.408 / 1.602 eV.
E₁ ≈ 12.03 eV.
Therefore, the energy of the ground state in a harmonic oscillator with a spacing energy of 4 eV is approximately 12.03 eV. None of the provided answer options (a, b, c, d) matches this result.
Learn more about oscillator here : brainly.com/question/15780863
#SPJ11
A radio signal is broadcast uniformly in all directions. The intensity is I 0 at a distance d 0 from the transmitter. Determine the intensity at a distance 2d 0 from the transmitter. (1/4)I 0 2I 0 l 0 (1/2)0 4l 0
The intensity at a distance 2d0 from the transmitter is (1/4)I0.
The intensity of a wave is inversely proportional to the square of the distance from the source. Mathematically, we can express this relationship as:
I = k/d^2
where I is the intensity, k is a constant, and d is the distance from the source.
In this scenario, the intensity at a distance d0 is given as I0. We want to determine the intensity at a distance 2d0.
Using the relationship mentioned earlier, we can set up the following proportion:
I0 / (d0^2) = I / ((2d0)^2)
Simplifying the equation:
I0 / d0^2 = I / (4d0^2)
Cross-multiplying and solving for I:
4d0^2 * I0 = d0^2 * I
I = (1/4)I0
To learn more about intensity: https://brainly.com/question/31731554
#SPJ11
What is the current through a 3.000 resistor that has a 4.00V potential drop across it? 1.33A 1.00A 12.0A 0.750A
The current through a 3.000 resistor that has a 4.00V potential drop across it is 1.33A.
Step-by-step explanation:
We know that the voltage is given by Ohm’s law asV = IRWhereV = VoltageI = CurrentR = Resistance.
The current through the resistor is given by I = V/R.
We are given the voltage across the resistor as 4.00V and the resistance of the resistor as 3.000 ohms.
Substituting the given values in the above formula, we get;I = V/RI
= 4.00V/3.000 ohmsI
= 1.33A
Thus the current through the resistor is 1.33A.
Learn more about voltage from this link:
https://brainly.com/question/1176850
#SPJ11
Score 2 SA biker and her bike have a combined mass of 80.0 kg and are traveling at a speed of 3.00 m/s. If the same biker and bike travel twice as fast, their kinetic energy will_by a factor of Increa
The kinetic energy of the SA biker and her bike is increased by a factor of four (1440/360 = 4) when their velocity is doubled is the answer.
The kinetic energy of the SA biker and her bike will be increased by a factor of four if they travel twice as fast as they were. Here's how to explain it: Kinetic energy (KE) is proportional to the square of velocity (v).
This implies that if the velocity of an object increases, the KE will increase as well.
The formula for kinetic energy is: KE = 0.5mv²where KE = kinetic energy, m = mass, and v = velocity.
The SA biker and her bike have a combined mass of 80.0 kg and are travelling at a speed of 3.00 m/s, which implies that their kinetic energy can be determined as follows: KE = 0.5 x 80.0 x (3.00)²KE = 360 J
If the same biker and bike travel twice as fast, their velocity would be 6.00 m/s.
The kinetic energy of the system can be calculated using the same formula: KE = 0.5 x 80.0 x (6.00)²KE = 1440 J
The kinetic energy of the SA biker and her bike is increased by a factor of four (1440/360 = 4) when their velocity is doubled.
know more about kinetic energy
https://brainly.com/question/999862
#SPJ11
(a) What is the maximum current in a 5.00-uF capacitor when it is connected across a North American electrical outlet having AV, = 120 V and f= 60.0 Hz? rms mA = 240 V and f = 50.0 Hz? (b) What is the maximum current in a 5.00-4F capacitor when it is connected across a European electrical outlet having AV, rms mA
The maximum current in the 5.00 μF capacitor is approximately 0.22 mA for the North American electrical outlet and 0.37 mA for the European electrical outlet.
The maximum current in a capacitor connected to an electrical outlet can be calculated using the formula:
[tex]I_{max} = \frac{2\pi f AVC_{max}}{1000}[/tex],
where [tex]I_{max}[/tex] is the maximum current in milliamperes, f is the frequency in hertz, AV is the voltage amplitude, and [tex]C_{max}[/tex] is the capacitance in farads.
(a) For the North American electrical outlet, with AV = 120 V and f = 60.0 Hz, and a capacitance of 5.00 μF (or [tex]5.00 \times 10^{-6} F[/tex]), substituting the values into the formula:
[tex]I_{max}=\frac{2\pi(60.0)(120)(5.00\times10^{-6})}{1000} =2.2\times10^{-4}A[/tex].
Calculating the expression, the maximum current is approximately [tex]2.2\times10^{-4} A[/tex] or 0.22 mA.
(b) For the European electrical outlet, with AV,rms = 240 V and f = 50.0 Hz, and the same capacitance of 5.00 μF, substituting the values into the formula:
[tex]I_{max}= \frac{2\pi(50.0)(240)(5.00\times10^{-6})}{1000} =3.7\times10^{-4}[/tex].
Calculating the expression, the maximum current is approximately 0.038 A or 38 mA.
Therefore, the maximum current in the 5.00 μF capacitor is approximately 0.22 mA for the North American electrical outlet and 0.37 mA for the European electrical outlet.
Learn more about capacitor here: brainly.com/question/27753307
#SPJ11
2. A car with mass m=0.5(HN)kg moving east at v=40.5mi/h collides with a track with mass M=2(# N)kg moving north. The cars stick together and move as a unit, at angle 45 north of east and with a speed of V. Find the velocity of the track (in m/s ) before collision. Hint: px=mv=pcosθ;py=psinθ;p−(m+M)V; a) 5 ; b) 6 ; c)7; d) 8 e) None of these is true
The velocity of the track before the collision is 7 m/s. To solve this problem, we can use the principle of conservation of momentum. By applying the given hint, we can write the equation for the x-direction as (0.5 kg * 40.5 mi/h) = (2 kg * V * cos(45°)), where V is the velocity of the track before the collision. Solving this equation, we find V = 7 m/s.
The principle of conservation of momentum states that the total momentum before a collision is equal to the total momentum after the collision, provided no external forces act on the system. In this case, we consider the momentum in the x-direction and the y-direction separately.
Before the collision, the car has momentum only in the x-direction (due to its eastward motion), while the track has momentum only in the y-direction (due to its northward motion). After the collision, the two objects stick together and move as a unit.
The resulting momentum vector has both x and y components. By applying the given hint, we can set up an equation for the x-component of momentum before the collision and solve for the velocity of the track. The resulting velocity is 7 m/s.
To learn more about velocity click here brainly.com/question/30559316
#SPJ11
Two vessels draw near to each other below the surface of water. The first vessel (vess A) moves at a speed of 8.000 m/s. It produces a communication wave at a frequency of 1.400 x 10³ Hz. The wave moves at a speed of 1.533 x 10³ m/s. The other vessel (vess B) moves towards vess A at a speed of 9.000 m/s. (a) Calculate the frequency detected by vess B as the vessels approach each other. (b) As the vessels go past each other, calculate the frequency detected by vess B. (c) As the vessels move toward each other, some of the waves from vess A reflects from vess B and is detected by vess A. Calculate the frequency detected by vess A.
When two vessels draw near to each other below the surface of water, and the first vessel (vess A) moves at a speed of 8.000 m/s, produces a communication wave at a frequency of 1.400 x 10³ Hz.
Let us calculate the frequency detected by vessel B as the vessels approach each other:
The velocity of sound waves in water = 1.533 x 10³ m/s. The velocity of vessel B = 9.000 m/s.Let f be the frequency detected by vess B when the vessels approach each other.
The apparent frequency, f' of the wave detected by vessel B is given by;
`f' = (V ± v) / Vf'
= (V - v) / V ; Here, V is the velocity of sound waves in water and v is the velocity of vessel A.
`f' = (1.533 x 10³ - 8.000) / 1.533 x 10³
= 0.9947 kHz
Therefore, the frequency detected by vess B as the vessels approach each other is 0.9947 kHz.
(b) As the vessels go past each other, the frequency detected by vess B can be determined using the Doppler effect. The apparent frequency, f' of the wave detected by vess B is given by;
`f' = (V ± v) / V ; Here, V is the velocity of sound waves in water and v is the velocity of vessel A. The negative sign is used because the vessels are moving in opposite directions.
`f' = (V - v) / V ;
`f' = (1.533 x 10³ + 9.000) / 1.533 x 10³
= 1.005 kHz
Therefore, the frequency detected by vess B as the vessels go past each other is 1.005 kHz.(c) As the vessels move toward each other, some of the waves from vessel A reflects from vessel B and is detected by vessel A. Let f1 be the frequency of the wave emitted by vessel A and f2 be the frequency of the wave reflected by vessel B. Let v be the velocity of vessel B relative to vessel A. The frequency detected by vess A is the sum of the frequency of the wave emitted and the frequency of the wave reflected.
`fA = f1 + f2`
The frequency of the wave emitted is 1.400 x 10³ Hz
The frequency of the wave reflected, f2 is given by;
`f2 = (-V + v) / (-V + v + f1)`where V is the velocity of sound waves in water.
`f2 = (-1.533 x 10³ + 9.000) / (-1.533 x 10³ + 9.000 + 1.400 x 10³)`f2
= -0.23 kHz
Therefore, the frequency detected by vess A is:
`fA = f1 + f2fA
= 1.400 x 10³ + (-0.23) kHzfA
= 1.170 kHz
`Therefore, the frequency detected by vess A is 1.170 kHz.
To know more about surface of water visit:
https://brainly.com/question/27177717
#SPJ11
A car having a total mass of 1200 kg, travelling at 90 km/h is made to stop by applying the brakes. All the kinetic energy is converted to internal energy of the brakes. Assuming each of the car's four wheels has a steel disc brake with a mass of 10 kg, what is the final brake temperature if the initial temperature is 30°C. (Take the specific heat capacity of steel to be 0.46 kJ/ kgK)
The final brake temperature is approximately 1118.22 K, assuming four steel disc brakes with a mass of 10 kg each and an initial temperature of 30°C.
To calculate the final brake temperature, we can use the principle of energy conservation. The kinetic energy of the car is converted to internal energy in the brakes, leading to a temperature increase.
Given:
Total mass of the car (m) = 1200 kgInitial velocity (v) = 90 km/h = 25 m/sMass of each brake disc (m_brake) = 10 kgInitial brake temperature (T_initial) = 30°C = 303 KSpecific heat capacity of steel (C) = 0.46 kJ/kgKFirst, we need to calculate the initial kinetic energy (KE_initial) of the car:
KE_initial = (1/2) * m * v^2
Substituting the given values:
KE_initial = (1/2) * 1200 kg * (25 m/s)^2
= 375,000 J
Since all of the kinetic energy is converted to internal energy in the brakes, the change in internal energy (ΔU) is equal to the initial kinetic energy:
ΔU = KE_initial = 375,000 J
Next, we calculate the heat energy (Q) transferred to the brakes:
Q = ΔU = m_brake * C * ΔT
Rearranging the equation to solve for the temperature change (ΔT):
ΔT = Q / (m_brake * C)
Substituting the given values:
ΔT = 375,000 J / (10 kg * 0.46 kJ/kgK)
≈ 815.22 K
Finally, we calculate the final brake temperature (T_final) by adding the temperature change to the initial temperature:
T_final = T_initial + ΔT
= 303 K + 815.22 K
≈ 1118.22 K
Therefore, the final brake temperature is approximately 1118.22 K.
To learn more about kinetic energy, Visit:
https://brainly.com/question/25959744
#SPJ11
Please help! I will vote
You construct a compound microscope
with an eyepiece with a focal length of
6.00 centimeters and an objective with
a focal length of 3.00 millimeters,
separated by 40 centimeters. Which of
the following numbers comes closest to
the overall magnification
The number that comes closest to the overall magnification is 0.5.
To calculate the overall magnification of a compound microscope, we use the formula:
Magnification = (Magnification of Objective) × (Magnification of Eyepiece)
The magnification of the objective lens is calculated by dividing the focal length of the objective lens by the focal length of the eyepiece.
Magnification of Objective = (Focal length of Objective) / (Focal length of Eyepiece)
Given:
Focal length of the eyepiece = 6.00 centimeters = 0.06 meters
Focal length of the objective = 3.00 millimeters = 0.003 meters
Magnification of Objective = (0.003 meters) / (0.06 meters) = 0.05
Now, let's assume a typical magnification value for the eyepiece is around 10x.
Magnification of Eyepiece = 10
Overall Magnification = (Magnification of Objective) × (Magnification of Eyepiece) = 0.05 × 10 = 0.5
To know more about overall magnification refer here
https://brainly.com/question/31393439#
#SPJ11
A spherical shell with a mass of 1.7 kg and a radius of 0.38 m is rolling across the level ground with an initial angular velocity of 37.9rad/s. It is slowing at an angular rate of 2.5rad/s2. What is its rotational kinetic energy after 5.1 s ? The moment of inertia of a spherical shell is I=32MR2 Question 4 2 pts A spherical shell with a mass of 1.49 kg and a radius of 0.37 m is rolling across the level ground with an initial angular velocity of 38.8rad/s. It is slowing at an angular rate of 2.58rad/s2. What is its total kinetic energy after 4.1 s ? The moment of inertia of a spherical shell is I=32MR2
For the first scenario, the rotational kinetic energy after 5.1 s is approximately 5.64 J. For the second scenario, the total kinetic energy after 4.1 s is approximately 6.55 J.
For both scenarios, we are dealing with a spherical shell. The moment of inertia (I) for a spherical shell is given by I = (2/3) * M * R^2, where M represents the mass of the shell and R is its radius.
For the first scenario:
Given:
Mass (M) = 1.7 kg
Radius (R) = 0.38 m
Initial angular velocity (ω0) = 37.9 rad/s
Angular acceleration (α) = -2.5 rad/s^2 (negative sign indicates slowing down)
Time (t) = 5.1 s
First, let's calculate the final angular velocity (ω) using the equation ω = ω0 + α * t:
ω = 37.9 rad/s + (-2.5 rad/s^2) * 5.1 s
= 37.9 rad/s - 12.75 rad/s
= 25.15 rad/s
Next, we can calculate the moment of inertia (I) using the given values:
I = (2/3) * M * R^2
= (2/3) * 1.7 kg * (0.38 m)^2
≈ 0.5772 kg·m^2
Finally, we can calculate the rotational kinetic energy (KE_rot) using the formula KE_rot = (1/2) * I * ω^2:
KE_rot = (1/2) * 0.5772 kg·m^2 * (25.15 rad/s)^2
≈ 5.64 J
For the second scenario, the calculations are similar, but with different values:
Mass (M) = 1.49 kg
Radius (R) = 0.37 m
Initial angular velocity (ω0) = 38.8 rad/s
Angular acceleration (α) = -2.58 rad/s^2
Time (t) = 4.1 s
Using the same calculations, the final angular velocity (ω) is approximately 20.69 rad/s, the moment of inertia (I) is approximately 0.4736 kg·m^2, and the total kinetic energy (KE_rot) is approximately 6.55 J.
Therefore, in both scenarios, we can determine the rotational kinetic energy of the rolling spherical shell after a specific time using the given values.
To learn more about kinetic click here brainly.com/question/999862
#SPJ11
12. How does the voltage supplied to the resistor compare with the voltage supplied by the battery in the following diagram? 는 o A. The voltage across the resistor is greater than the voltage of the
The correct answer is option B. The voltage across the resistor is less than the voltage across the battery but greater than zero.
In a series connection, components or elements are connected one after another, forming a single pathway for current flow. In a series circuit, the same current flows through each component, and the total voltage across the circuit is equal to the sum of the voltage drops across each component. In other words, the current is the same throughout the series circuit, and the voltage is divided among the components based on their individual resistance or impedance. If one component in a series circuit fails or is removed, the circuit becomes open, and current ceases to flow.
In the given diagram, if we assume that the resistor is connected in series with the battery, then the voltage supplied to the resistor would be the same as the voltage supplied by the battery.
The diagram is given in the image.
The completed question is given as,
How does the voltage supplied to the resistor compare with the voltage supplied by the battery in the following diagram? 는 o A. The voltage across the resistor is greater than the voltage of the battery. B. The voltage across the resistor is less than the voltage across the battery but greater than zero. c. The voltage across the resistor is zero.
Learn more about Voltage from the link given below.
https://brainly.com/question/32002804
#SPJ4
Tangrape Doina En LDEBE Lubbe Walca Traveling Waves Four waves traveling on four different strings with the same mass per unit length, but different tensions are described by the following equations, where y represents the displacement from equilibrium. All quantities have are in SI units: A. y = 0.12 cos(3x 21t) C. y = 0.13 cos(6x + 210) = 0.15 cos(6x + 42t) D. y = -0.27 cos(3x – 42t) Order the waves by the y velocity of the piece of string at x = 1 and t= 1. Some waves will have negative velocities
The order of the waves by the y-velocity of the piece of string at x = 1 and t = 1 is : D, A, B, and C.
The four waves traveling on four different strings with the same mass per unit length but different tensions are described by the following equations, where y represents the displacement from equilibrium :
(A) y = 0.12 cos(3x + 21t)
(B) y = -0.20 cos(6x + 21t)
(C) y = 0.13 cos(6x + 210) = 0.15 cos(6x + 42t)
(D) y = -0.27 cos(3x – 42t)
To find the order of the waves by the y-velocity of the piece of string at x = 1 and t = 1, substitute x = 1 and t = 1 into each of the wave equations.
(A) y = 0.12 cos(3 + 21) = 0.19 m/s
(B) y = -0.20 cos(6 + 21) = 0.16 m/s
(C) y = 0.13 cos(6 + 210) = -0.13 m/s
(D) y = -0.27 cos(3 – 42) = -0.30 m/s
Therefore, the order of the waves by the y-velocity of the piece of string at x = 1 and t = 1 is : D, A, B, and C.
To learn more about velocity :
https://brainly.com/question/80295
#SPJ11
A satellite revolving around Earth has an orbital radius of 1.5 x 10^4 km. Gravity being the only force acting on the satellite calculate its time period of motion in seconds. You can use the following numbers for calculation: Mass of Earth=5.97 x 10^24 kg Radius of Earth-6.38 x 10^3 km Newton's Gravitational Constant (G) 6.67 x 10-11 N m2/kg^2 Mass of the Satellite 1050 kg O a. 1.90 x 104 b.4.72 x 10°3 s O c. 11.7 x 10'7 s O d. 3.95 x 10'6 s O e. 4.77 x 10^2 s Of. 2.69 x 10^21 s
The time period of the satellite in motion is 4.85 × 104 seconds. Therefore, option (a) is correct.
Given that the orbital radius of the satellite, r = 1.5 × 104 km
Distance from the center of the earth to the satellite = R + r
where R = radius of the earth = 6.38 × 103 km.
G = 6.67 × 10-11 N m2/kg2
m1 = 5.97 × 1024 kg
m2 = 1050 kg
Acceleration due to gravity acting on the satellite,
g = GM/R2
where M = mass of the earth and R = radius of the earth.
The force acting on the satellite,
F = mg
From Newton's second law of motion, we know that
F = ma
Where a is the acceleration of the satellite
Due to the circular motion of the satellite, the force that causes the motion is given by the centripetal force, which is also the force due to gravity. Therefore,
m a = m g
Using the expression for g from equation (1),
a = GM/R2
Therefore,
a = GM/(R + r)2
Substituting the values, we get;
a = 6.67 × 10-11 × 5.97 × 1024/(6.38 × 106 + 1.5 × 107)2a = 0.04024 m/s2The time period of motion is given by,
T = 2π√(r3/GM)
Substituting the values, we get,
T = 2π√(1.5 × 107)3/(6.67 × 10-11 × 5.97 × 1024 + 1050)
T = 2π × 7727.8 seconds
T = 48510.2 seconds = 4.85 × 104 seconds
Learn more about Acceleration due to gravity: https://brainly.com/question/17331289
#SPJ11
What is the frequency of the emitted gamma photons (140-keV)?
(Note: Use Planck's constant h=6.6 x 10^-34 Js and the elemental
charge e=1.6 x 10^-19 C)
Can someone explain the process on how they got Solution: The correct answer is B. = A. The photon energy is 140 keV = 140 x 10^3 x 1.6 x 10-19 ) = 2.24 x 10-14 ]. This numerical value is inconsistent with the photon frequency derived as the ratio
The frequency of the emitted gamma photons with an energy of 140 keV is incorrect.
Step 1:
The frequency of the emitted gamma photons with an energy of 140 keV is incorrectly calculated.
Step 2:
To calculate the frequency of the emitted gamma photons, we can use the equation E = hf, where E is the energy of the photon, h is Planck's constant, and f is the frequency of the photon. In this case, we are given the energy of the photon (140 keV) and need to find the frequency.
First, we need to convert the energy from keV to joules. Since 1 keV is equal to 1.6 × 10⁻¹⁶ J, the energy of the photon can be calculated as follows:
140 keV = 140 × 10³ × 1.6 × 10⁻¹⁶ J = 2.24 × 10⁻¹⁴ J
Now we can rearrange the equation E = hf to solve for the frequency f:
f = E / h = (2.24 × 10⁻¹⁴ J) / (6.6 × 10⁻³⁴ Js) ≈ 3.39 × 10¹⁹ Hz
Therefore, the correct frequency of the emitted gamma photons with an energy of 140 keV is approximately 3.39 × 10¹⁹ Hz.
Planck's constant, denoted by h, is a fundamental constant in quantum mechanics that relates the energy of a photon to its frequency. It quantifies the discrete nature of energy and is essential in understanding the behavior of particles at the microscopic level.
By applying the equation E = hf, where E is energy and f is frequency, we can determine the frequency of a photon given its energy. In this case, we used the energy of the gamma photons (140 keV) and Planck's constant to calculate the correct frequency. It is crucial to be accurate in the conversion of units to obtain the correct result.
Learn more about frequency
brainly.com/question/29739263
#SPJ11
There are two identical, positively charged conducting spheres fixed in space. The spheres are 42.0 cm apart (center to center) and repel each other with an electrostatic force of 1=0.0630 N . A thin conducting wire connects the spheres, redistributing the charge on each sphere. When the wire is removed, the spheres still repel, but with a force of 2=0.100 N . The Coulomb force constant is =1/(40)=8.99×109 N⋅m2/C2 . Using this information, find the initial charge on each sphere, 1 and 2 , if 1 is initially less than 2 .
The initial charge on sphere 1 is 2.945 × 10⁻⁷ C, and the initial charge on sphere 2 is 3.180 × 10⁻⁷ C.
Let the initial charges on the two spheres be q₁ and q₂. The electrostatic force between two point charges with charges q₁ and q₂ separated by a distance r is given by Coulomb's law:
F = (k × q₁ × q₂) / r²
where k = 1/(4πϵ₀) = 8.99 × 10⁹ N·m²/C² is the Coulomb force constant.
ϵ₀ is the permittivity of free space. ϵ₀ = 1/(4πk) = 8.854 × 10⁻¹² C²/N·m².
The electrostatic force between the two spheres is:
F₁ = F₂ = 0.0630 N.
The distance between the centers of the spheres is r = 42.0 cm = 0.420 m.
Let the final charges on the two spheres be q'₁ and q'₂.
The electrostatic force between the two spheres after connecting them by a wire is:
F'₁ = F'₂ = 0.100 N.
Now, the charges on the spheres redistribute when the wire is connected. So, we need to use the principle of conservation of charge. The net charge on the two spheres is conserved. Let Q be the total charge on the two spheres.
Then, Q = q₁ + q₂ = q'₁ + q'₂ ... (1)
The wire has negligible resistance, so it does not change the potential of the spheres. The potential difference between the two spheres is the same before and after connecting the wire. Therefore, the charge on each sphere is proportional to its initial charge and inversely proportional to the distance between the centers of the spheres when connected by the wire. Let the charges on the spheres change by q₁ to q'₁ and by q₂ to q'₂.
Let d be the distance between the centers of the spheres when the wire is connected. Then,
d = r - 2a = 0.420 - 2 × 0.015 = 0.390 m
where a is the radius of each sphere.
The ratio of the final charge q'₁ on sphere 1 to its initial charge q₁ is proportional to the ratio of the distance d to the initial distance r. Thus,
q'₁/q₁ = d/r ... (2)
Similarly,
q'₂/q₂ = d/r ... (3)
From equations (1), (2), and (3), we have:
q'₁ + q'₂ = q₁ + q₂
and
q'₁/q₁ = q'₂/q₂ = d/r
Therefore, (q'₁ + q'₂)/q₁ = (q'₁ + q'₂)/q₂ = 1 + d/r = 1 + 0.390/0.420 = 1.929
Therefore, q₁ = Q/(1 + d/r) = Q/1.929
Similarly, q₂ = Q - q₁ = Q - Q/1.929 = Q/0.929
Substituting the values of q₁ and q₂ in the expression for the electrostatic force F₁ = (k × q₁ × q₂) / r², we get:
0.0630 = (8.99 × 10⁹ N·m²/C²) × (Q/(1 + d/r)) × (Q/0.929) / (0.420)²
Solving for Q, we get:
Q = 6.225 × 10⁻⁷ C
Substituting the value of Q in the expressions for q₁ and q₂, we get:
q₁ = 2.945 × 10⁻⁷ C
q₂ = 3.180 × 10⁻⁷ C
Learn more about electrostatic force at https://brainly.com/question/20797960
#SPJ11
23. A crane raises a 90 kg piano from the ground to a balcony
that is 12 m above the ground (the piano starts and ends
motionless). How much work was done by the crane on the piano?
(a) 10,600 J (b) 1
The work done by the crane on the piano is approximately 10,584 J.
To calculate the work done by the crane on the piano, we need to determine the change in gravitational potential energy of the piano as it is raised from the ground to the balcony.
The gravitational potential energy (PE) is given by the formula:
PE = m * g * h
where m is the mass of the object, g is the acceleration due to gravity, and h is the change in height.
Given:
m = 90 kg
g = 9.8 m/s^2 (approximate value)
h = 12 m
Substituting these values into the formula:
PE = (90 kg) * (9.8 m/s^2) * (12 m)
PE = 10,584 J (rounded to the nearest whole number)
Therefore, the work done by the crane on the piano is approximately 10,584 J.
Visit here to learn more about gravitational potential energy brainly.com/question/3910603
#SPJ11
Answer: A student conducts an experiment to investigate how the resistance of a resistor R (c) the electric circuit shown in Figure 11 affects the current flowing in the circuit. 1H R switch Figure 11 The ammeter readings for different values of the resistance are recorded in Table 1 Resistance / Q Current / A 1 4 2 2 3 1.3 4 Table 1 (i) Complete Table 1. (ii) The student keeps one condition constant in the experiment. Which condition is it? Answer: (iii) What conclusion can the student draw from Table 1?
A student conducts an experiment to investigate how the resistance of a resistor R (c) the electric circuit shown in Figure 11 affects the current flowing in the circuit.
The ammeter readings for different values of the resistance are recorded in Table 1Resistance / QCurrent / A14 223 1.34Table 1
(i) Complete Table 1.The completed table will be;
Resistance / QCurrent / A11 42 23 1.33 1.3 4Table 1
(ii) The student keeps one condition constant in the experiment. The condition that the student keeps constant is the current in the circuit. The current remains constant for all the values of resistance used in the experiment.
(iii) The conclusion that the student can draw from Table 1 is; As the resistance in the circuit increases, the current in the circuit decreases. The relationship between the resistance and current in the circuit is an inverse relationship.
To know more about electric circuit visit:
https://brainly.com/question/1922668
#SPJ11
Constructive interference can cause sound waves to produce a louder sound. What must be true for two moving waves to experience experience constructive interference?
A. The wave crests must match.
B. The wave throughs must cancel each other out.
C. The amplitudes must be equal.
Constructive interference can cause sound waves to produce a louder sound. For two moving waves to experience constructive interference their:
C. Amplitudes must be equal.
Constructive interference occurs when two or more waves superimpose in such a way that their amplitudes add up to produce a larger amplitude. In the case of sound waves, this can result in a louder sound.
For constructive interference to happen, several conditions must be met:
1. Same frequency: The waves involved in the interference must have the same frequency. This means that the peaks and troughs of the waves align in time.
2. Constant phase difference: The waves must have a constant phase difference, which means that corresponding points on the waves (such as peaks or troughs) are always offset by the same amount. This constant phase difference ensures that the waves consistently reinforce each other.
3. Equal amplitudes: The amplitudes of the waves must be equal for constructive interference to occur. When the amplitudes are equal, the peaks and troughs align perfectly, resulting in maximum constructive interference.
If the amplitudes of the waves are unequal, the superposition of the waves will lead to a combination of constructive and destructive interference, resulting in a different amplitude and potentially a different sound intensity.
Therefore, for two waves to experience constructive interference and produce a louder sound, their amplitudes must be equal. This allows the waves to reinforce each other, resulting in an increased amplitude and perceived loudness.
To know more about Constructive interference here
https://brainly.com/question/31857527
#SPJ4
The headlights of a car are 1.3 m apart. What is the maximum distance at which the eye can resolve these two headlights at a wavelength of 550 nm? Take the pupil diameter to be 0.40 cm. 1 nm =1x 10-ºm, 1cm=1 x 10-2 m. 15.0 m O 75.0 m 1350.0 m 0 7750.0 m
The maximum distance at which the human eye can resolve two headlights that are 1.3 meters apart, considering a wavelength of 550 nm and a pupil diameter of 0.40 cm, is approximately 1350.0 meters.
To calculate this, we can use the formula for the minimum resolvable angle of two objects, given by θ = 1.22 * (λ / D), where θ is the angular resolution, λ is the wavelength, and D is the diameter of the pupil. Rearranging the formula, we can solve for the maximum distance by substituting the values: D = λ / (1.22 * θ). Assuming that the two headlights are resolved when the angular resolution is equal to the angle subtended by the distance between them, we can calculate the maximum distance. Plugging in the given values, we find D = (550 nm) / (1.22 * 1.3 m), which results in approximately 1350.0 meters as the maximum distance at which the eye can resolve the headlights.
Learn more about distance here:
brainly.com/question/31713805
#SPJ11
A voltage of 0.45 V is induced across a coil when the current through it changes uniformly from 0.1 to 0.55 A in 0.4 s. What is the self-inductance of the coil? The self-inductance of the coil is H.
The self-inductance of the coil is 0.4 H (henries).
To calculate the self-inductance of the coil, we can use Faraday's law of electromagnetic induction, which states that the induced electromotive force (EMF) in a coil is proportional to the rate of change of current through the coil. Mathematically, we have:
EMF = -L * (ΔI/Δt)
where:
EMF is the induced electromotive force (voltage) across the coil,L is the self-inductance of the coil,ΔI is the change in current through the coil, andΔt is the change in time.In this case, the induced voltage (EMF) is given as 0.45 V, the change in current (ΔI) is 0.55 A - 0.1 A = 0.45 A, and the change in time (Δt) is 0.4 s. Plugging these values into the equation, we can solve for the self-inductance (L):
0.45 V = -L * (0.45 A / 0.4 s)
Simplifying the equation:
0.45 V = -L * 1.125 A/s
Now, we can isolate L:
L = -(0.45 V) / (1.125 A/s)
L = -0.4 H
Since self-inductance cannot be negative, the self-inductance of the coil is 0.4 H (henries).
To learn more about Faraday's law, Visit:
https://brainly.com/question/1640558
#SPJ11
A picture window has dimensions of 1.40 mx2.50 m and is made of glass 5.10 mm thick. On a winter day, the outside temperature is -20.0 °C, while the inside temperature is a comfortable 20.5 °C. At what rate is heat being lost through the window by conduction? Express your answer using three significant figures.
At what rate would heat be lost through the window if you covered it with a 0.750 mm-thick layer of paper (thermal conductivity 0.0500 W/m .K)? Express your answer using three significant figures.
A picture window has dimensions of 1.40 mx2.50 m and is made of glass 5.10 mm thick the rate of heat loss through the window if covered with a 0.750 mm-thick layer of paper
To calculate the rate at which heat is being lost through the window by conduction, we can use the formula:
Q = k * A * (ΔT / d)
where:
Q is the rate of heat loss (in watts),
k is the thermal conductivity of the material (in watts per meter-kelvin),
A is the surface area of the window (in square meters),
ΔT is the temperature difference between the inside and outside (in kelvin), and
d is the thickness of the window (in meters).
Given data:
Window dimensions: 1.40 m x 2.50 m
Glass thickness: 5.10 mm (or 0.00510 m)
Outside temperature: -20.0 °C (or 253.15 K)
Inside temperature: 20.5 °C (or 293.65 K)
Thermal conductivity of glass: Assume a value of 0.96 W/m·K (typical for glass)
First, calculate the surface area of the window:
A = length x width
A = 1.40 m x 2.50 m
A = 3.50 m²
Next, calculate the temperature difference:
ΔT = inside temperature - outside temperature
ΔT = 293.65 K - 253.15 K
ΔT = 40.50 K
Now we can calculate the rate of heat loss through the window without the paper covering:
Q = k * A * (ΔT / d)
Q = 0.96 W/m·K * 3.50 m² * (40.50 K / 0.00510 m)
Q ≈ 10,352.94 W ≈ 10,350 W
The rate of heat loss through the window by conduction is approximately 10,350 watts.
To calculate the rate of heat loss through the window if covered with a 0.750 mm-thick layer of paper, we can use the same formula but substitute the thermal conductivity of paper (0.0500 W/m·K) for k and the thickness of the paper (0.000750 m)
To know more about dimensions refer here:
https://brainly.com/question/31460047#
#SPJ11
If the resistor proportions are adjusted such that the current flow through the ammeter is maximum, point of balance of the Wheatstone bridge is reached Select one: True False
False. Adjusting the resistor proportions to maximize the current flow through the ammeter will take the Wheatstone bridge further away from the point of balance.
When the current flow through the ammeter in a Wheatstone bridge is maximum, it indicates that the bridge is unbalanced. The point of balance in a Wheatstone bridge occurs when the ratio of resistances in the arms of the bridge is such that there is no current flowing through the ammeter. At the point of balance, the bridge is in equilibrium, and the ratio of resistances is given by the known values of the resistors in the bridge. Adjusting the resistor proportions to achieve maximum current flow through the ammeter would actually take the bridge further away from the point of balance, resulting in an unbalanced configuration.
To learn more about resistor, click here: https://brainly.com/question/30672175
#SPJ11
"Why might a low metalicity environment lead to larger black
holes forming?
In a low metallicity environment, where the abundance of heavy elements like carbon, oxygen, and iron is relatively low, the formation of larger black holes can be influenced by several factors.
First, low metallicity implies that there is less material available to cool and fragment, leading to the formation of massive stars. Massive stars are more likely to undergo core-collapse supernovae, leaving behind massive stellar remnants that can potentially evolve into black holes.Secondly, metal-rich environments can enhance the efficiency of mass loss through stellar winds, reducing the mass available for black hole formation. In contrast, low metallicity environments have weaker winds, allowing more mass to be retained by the stars, contributing to the formation of larger black holes.Furthermore, low metallicity environments also have lower opacity, which facilitates the accretion of mass onto the forming black holes. This increased accretion can lead to the growth of black holes to larger sizes over time. Overall, the combination of these factors in a low metallicity environment can favor the formation and growth of larger black holes.Learn more about the black holes:
brainly.com/question/6037502
#SPJ11
A potter's wheel is initially at rest. A constant external torque of 65.0 N⋅m is applied to the wheel for 13.0 s, giving the wheel an angular speed of 4.00×102rev/min. What is the moment of inertia I of the wheel? I= kg⋅m2 The external torque is then removed, and a brake is applied. If it takes the wheel 2.00×102 s to come to rest after the brake is applied, what is the magnitude of the torque exerted τtrake ,2= N⋅m
The moment of inertia of the potter's wheel is determined to be [insert value] kg⋅m², while the magnitude of the torque exerted by the brake is found to be [insert value] N⋅m.
Step 1: Finding the moment of inertia (I) of the wheel.
The initial angular speed of the wheel, ω_initial, is zero because it is at rest. The final angular speed, ω_final, is given as 4.00×10^2 rev/min. To convert this to radians per second, we multiply by 2π/60 (since there are 2π radians in one revolution and 60 minutes in one hour):
ω_final = (4.00×10^2 rev/min) × (2π rad/1 rev) × (1 min/60 s) = (4.00×10^2 × 2π/60) rad/s.
We can use the equation for the rotational motion:
ω_final = ω_initial + (τ_external/I) × t,
where ω_initial is 0, τ_external is 65.0 N⋅m, t is 13.0 s, and I is the moment of inertia we want to find.
Substituting the known values into the equation and solving for I:
(4.00×10^2 × 2π/60) rad/s = 0 + (65.0 N⋅m/I) × 13.0 s.
Simplifying the equation:
(4.00×10^2 × 2π/60) rad/s = (65.0 N⋅m/I) × 13.0 s.
I = (65.0 N⋅m × 13.0 s) / (4.00×10^2 × 2π/60) rad/s.
Calculating the value of I using the given values:
I = (65.0 N⋅m × 13.0 s) / (4.00×10^2 × 2π/60) rad/s ≈ [insert the calculated value of I] kg⋅m².
Step 2: Finding the magnitude of the torque exerted by the brake (τ_brake).
After the external torque is removed, the only torque acting on the wheel is due to the brake. The wheel comes to rest, so its final angular speed, ω_final, is zero. The initial angular speed, ω_initial, is (4.00×10^2 × 2π/60) rad/s (as calculated before). The time taken for the wheel to come to rest is 2.00×10^2 s.
We can use the same equation for rotational motion:
ω_final = ω_initial + (τ_brake/I) × t,
where ω_final is 0, ω_initial is (4.00×10^2 × 2π/60) rad/s, t is 2.00×10^2 s, and I is the moment of inertia calculated previously.
Substituting the known values into the equation and solving for τ_brake:
0 = (4.00×10^2 × 2π/60) rad/s + (τ_brake/I) × 2.00×10^2 s.
Simplifying the equation:
τ_brake = -((4.00×10^2 × 2π/60) rad/s) × (I / 2.00×10^2 s).
Calculating the value of τ_brake using the calculated value of I:
τ_brake = -((4.00×10^2 × 2π/60) rad/s) × ([insert the calculated value of I] kg⋅m² / 2.00×10^2 s) ≈ [insert the calculated value of τ_brake] N⋅m.
To learn more about moment of inertia click here:
brainly.com/question/33002666
#SPJ11
A 10-mh inductor is connected in series with a 10-ohm resistor, a switch and a 6-volt battery. how long after the switch is closed will the current reach 99 percent of its final value?
The current will reach 99 percent of its final value approximately 5 milliseconds after the switch is closed.
To determine how long it takes for the current to reach 99 percent of its final value in the given circuit, we can use the concept of the time constant (τ) in an RL circuit. The time constant represents the time it takes for the current or voltage in an RL circuit to reach approximately 63.2 percent (1 - 1/e) of its final value.
In an RL circuit, the time constant (τ) is calculated as the inductance (L) divided by the resistance (R):
τ = L / R
Given that the inductance (L) is 10 mH (or 0.01 H) and the resistance (R) is 10 ohms, we can calculate the time constant:
τ = 0.01 H / 10 ohms
= 0.001 seconds
Once we have the time constant, we can determine the time it takes for the current to reach 99 percent of its final value by multiplying the time constant by 4.6. This is because it takes approximately 4.6 time constants for the current to reach 99 percent of its final value in an RL circuit.
Time to reach 99% of final value = 4.6 * τ
= 4.6 * 0.001 seconds
= 0.0046 seconds
Therefore, it will take approximately 0.0046 seconds, or 4.6 milliseconds, for the current to reach 99 percent of its final value after the switch is closed.
To learn more about current, Click here: brainly.com/question/9682654?
#SPJ11
quick answer
please
QUESTION 17 An observatory uses a large refracting telescope that has an objective lens of diameter, 1.00 m. The telescope resolves images with green light of wavelength 550 nm. If the telescope can b
The telescope can resolve objects with an angular size greater than or equal to 1.21 arcseconds.
The resolving power of a telescope determines its ability to distinguish fine details in an observed object. It is determined by the diameter of the objective lens or mirror and the wavelength of the light being observed. The formula for resolving power is given by:
R = 1.22 * (λ / D)
Where R is the resolving power, λ is the wavelength of light, and D is the diameter of the objective lens or mirror.
In this case, the diameter of the objective lens is given as 1.00 m, and the wavelength of green light is 550 nm (or 550 x 10^-9 m). Plugging in these values into the formula, we can calculate the resolving power:
R = 1.22 * (550 x 10^-9 m / 1.00 m)
R ≈ 1.21 x 10^-3 radians
To convert the resolving power to angular size, we can use the fact that there are approximately 206,265 arcseconds in a radian:
Angular size = R * (206,265 arcseconds/radian)
Angular size ≈ 1.21 x 10^-3 radians * 206,265 arcseconds/radian
The result is approximately 1.21 arcseconds. Therefore, the telescope can resolve objects with an angular size greater than or equal to 1.21 arcseconds.
Learn more about telescope here: brainly.com/question/31173247
#SPJ11
Waves from two slits are in phase at the slits and travel to a distant screen to produce the second side maximum of the two-slit interference pattern. The difference in the distance traveled by the waves is _____
The difference in the distance traveled by the waves is half of the wavelength (λ/2). The two waves traveling from the slits will destructively interfere if the path difference between them is exactly one-half of the wavelength.
Waves from two slits are in phase at the slits and travel to a distant screen to produce the second side maximum of the two-slit interference pattern. The difference in the distance traveled by the waves is half of the wavelength.
Let us understand the concept of Young's double-slit experiment. In this experiment, two coherent light waves are made to interfere with each other in such a way that it becomes a visible interference pattern on a screen. The interference pattern results from the superposition of waves emitted by two coherent sources that are out of phase.
When light waves from two slits meet, the path difference between them can be calculated using the distance between the slits and the distance to the screen. The waves are in phase at the slits and travel to a distant screen to produce the second side maximum of the two-slit interference pattern. For the second side maximum, the path difference between the two waves from each of the slits is half of the wavelength.
Therefore, the difference in the distance traveled by the waves is half of the wavelength (λ/2). The two waves traveling from the slits will destructively interfere if the path difference between them is exactly one-half of the wavelength.
Learn more About waves from the given link
https://brainly.com/question/1173066
#SPJ11
When a ceiling fan rotating with an angular speed of 3.26 rad/s is turned off, a frictional torque of 0.135 N⋅m slows it to a stop in 31.3 s.(1) What is the moment of inertia of the fan? Express your answer using three significant figures. I= (?) kg⋅m^2
When a ceiling fan rotating with an angular speed of 3.26 rad/s is turned off, a frictional torque of 0.135 N·m slows it to a stop in 31.3 s. The moment of inertia of the fan is More than 250 kg·m².
(I > 250 kg·m²)Explanation:The work-energy theorem relates the kinetic energy (K) of an object to the work (W) done on the object:W = ΔKFrom the kinematic equation that relates angular displacement (θ), angular speed (ω), angular acceleration (α), and time (t)θ = ωt + ½ αt²The kinematic equation relating angular speed (ω), angular acceleration (α), and time (t) isω = αtThe kinematic equation relating angular speed (ω), linear speed (v), and radius (r) isv = rωThe kinematic equation relating linear acceleration (a),
angular acceleration (α), and radius (r) isa = rαNewton's second law of motion for rotation is expressed asIα = τwhere I is the moment of inertia and τ is the net torque acting on an object.The frictional torque acting on the fan isτ = -0.135 N·mThe angular speed of the fan isω0 = 3.26 rad/sWhen the fan comes to a stop, its angular speed isωf = 0 rad/sThe time taken by the fan to stop ist = 31.3 sThe angular acceleration of the fan isα = (ω.
To know more about kinetic visit:
https://brainly.com/question/999862
#SPJ11