PLEASE HELP, MAJOR, brainest if correct

Answer:

it bc the adults are bigger then us kid so when they dip in the pool it makes bigger splashes

Explanation:

Answer:Ag2 O.

The formula for silver oxide is Ag2 O.

Explanation: one silver atom gives up an electron resulting in a +1 ion. Each oxygen atom requires two electrons to be stable.

How about: If mass is increased starting at 100 grams and 10 minutes, then the time will increase by 10 minutes by each 100g increase.

Answer:

The correct option is "Zero". A further explanation is given below.

Explanation:

As we know,

The capacitor is given by:

⇒ [tex]Q=C\times V[/tex]

Rate of change with respect to the time will be:

⇒ [tex]\frac{dQ}{dt}=C\times \frac{dV}{dt}[/tex]

Now,

It is mentioned in the question that the capacitor is completely charged, then

⇒ [tex]\frac{dV}{dt}=0[/tex]

i.e.,

⇒ [tex]\frac{dQ}{dt}=0[/tex]

All other choices available aren't related to that same scenario in question. So the answer above is the perfect one.

Answer:

Concept: Physics

Answer:

The axle is fixed to a frame or a block. The pulley is normally fixed to a support above the load. The load is tied to one end of the rope and the effort is applied at the other end. Such a pulley makes our work easier by simply changing the direction of the force, i.e. a load is lifted up using a downward effort.

May be this will help U

Answer:

The axle is fixed to a frame or a block. The pulley is normally fixed to a support above the load. The load is tied to one end of the rope and the effort is applied at the other end. Such a pulley makes our work easier by simply changing the direction of the force, i.e. a load is lifted up using a downward effort

Explanation:

Answer:

t = 3.52 s

Explanation:

Given that,

The deceleration of a car is, a = -1.7 m/s²

The initial velocity of the car, u = 15 m/s

Final velocity of the car, v = 9 m/s

We need to find the time that is required to slow the car from 15 m/s to 9 m/s. The definition of acceleration is :

[tex]a=\dfrac{v-u}{t}\\\\t=\dfrac{v-u}{a}\\\\t=\dfrac{9-15}{-1.7}\\\\t=3.52\ s[/tex]

So, it will take 3.52 seconds to slow the car from 15 m/s to 9 m/s.

Applicate formula:

Vf² = Vo² + 2ad

Clearing a:

a = (Vf² - Vo²) / 2d

Replacing:

a = ((20 m/s)² - 0 m/s)²) / 2 * 2 m

a = 400 m²/s² / 4 m²

a = 100 m/s²

The aceleration is 100 m/s²

Answer:

6m/s

Explanation:

Velocity (m/s) = Displacement (m) / Time (s)

Given:

Displacement = 180m

Time = 30s

Velocity = 180/30 = 6m/s

Answer:

B

Explanation:

Find the acceleration of the system

m2>m1

further m2 = 2m

and m1 = m

The acceleration is going to be the downward force created by m2 divided by the total mass (m2 + m2)

a = (m2*g - m1*g) / (m1 + m2)

a = (2m - m)*g/ (2m + m)

a = m * g/3m

a = 1/3 * g

Formula for time

Givens

distance := d

acceleration : = a  

vi = 0

Kinematic Formula

d = vi * t + 1/2 a t^2

Solution

d = 0 + 1/2 * 1/3 g  * t^2

6d = g * t^2

t^2 = 6d/g

t = √(6d/g)

Answer.

B

Answer:inertia

Explanation:

A car hits a tree and doesn’t stop, but keeps going until severely damaged. This is because of the principle of Inertia.

It states that" When a body s at rest it remains at rest, and IF the body is in motion It remains in motion until an external force is applied to that object."

i.e

If F=0, Then v= constant

and when that constant =0 then the body is at rest.

Where F= force

v = velocity.

Inertia is the tendency of an object to resist changes in its state of motion. In this case, the car was moving at a certain speed before it hit the tree, and because of its inertia, it continued to move forward even after the collision with the tree.

The car only stopped when another force acted on it, such as the force of the tree, or the force of friction with the ground, which slowed it down and eventually brought it to a stop. The severe damage to the car was a result of the force of the impact, which was a combination of the car's speed and its mass.

Hence the car does not stop because of the principle of inertia.

To learn more about Inertia click:

https://brainly.com/question/3268780

#SPJ3

but I think it's a and f

and

b and e

Answer:

1) Yes, the work done by gravity during the trip upward is -41.405·m J

2) Yes, the work done by gravity on the ball during the trip downward = 41.405·m J

Explanation:

The given parameters are;

The initial velocity of the ball on the way up = 9.1 m/s

The final velocity of the ball on the way up = 0 m/s

The initial velocity of the ball on its trip downward = 0 m/s

The final velocity of the ball on its trip downward = 9.1 m/s

1) The work done by gravity on the trip upward = The change in kinetic energy of the ball

The change in kinetic energy of the ball = 1/2 × m × 9.1² = -41.405·m J, given that the initial kinetic energy is 41.405·m J and the final kinetic energy is  J

Where;

m = The mass of the ball

Therefore, the work done by gravity during the trip upward = -41.405·m J

2) Similarly gravity does work on the ball during the trip downward = 41.405·m J.

Answer:

The diameter is EF

Explanation:

Given

Circle A (See attachment)

Required

Determine the line that represents the diameter

First, it should be noted that the diameter of a circle is always a straight line.

From the attachment, the circle has the following straight lines:

It should also be noted that the diameter passes through the center of a circle and divides it into two congruent parts.

From the list of straight lines above, only line EF satisfy this property

Hence, the diameter of the circle is line EF.

Answer:

As waves travel, they set up patterns of disturbance. The amplitude of a wave is its maximum disturbance from rest (its undisturbed position). It is important to note that the amplitude is not the distance between the top and bottom of a wave but is always measured from the rest position. This is a common exam mistake.

Explanation:

Answer:

4 kilograms

Explanation:

Answer:

2 moles of phosphorus difluoride

2PFsubscript2

I hope it will be useful.

Answer:

Electromagnets are special types of magnets that are made by passing current through coils of wire. To make an electromagnet, the minimum requirements are:

1. A nail (usually made of iron, steel or zinc)

2. Dry cell batteries

3. Wire (Usually copper wire)

Other things could be:

1. Electric tape to hold both ends of the wire properly at the battery terminals.

2. Scissors to cut the wire into desired length.

3. Iron fillings for testing purposes.

Answer:

Explanation:

The fundamental frequency in string is expressed as;

F1 = 1/2L√T/m .... 1

L is the length of the string

T is the tension

m is the mass per unit length

If the tension is increased by 40%, the new tension will be;

T2 = T + 40%T

T2 = T + 0.4T

T2 = 1.4T

The new fundamental frequency will be;

F2 = 1/2L√1.4T/m ..... 2

Divide 1 by 2;

F2/F = (1/2L√1.4T/m)/1/2L√T/m)+

F2/F = √1.4T/m ÷ √T/m

F2/F = √1.4T/√m ×√m/√T

F2/F = √1.4T/√T

F2/F = 1.18√T/√T

F2/F = 1.18

F2 = 1.18F

Hence the fundamental frequency of vibration changes by a factor of 1.18

Explanation:

Gas pedal is not required to used on friction less surface. On a friction less surface once the car is started and caused to move, car continues to move with same velocity as there is no opposing force. Therefore, no pressing of gas pedal required. However, this situation is not possible in real life, as friction is always present.

Answer:

rotation

Explanation:

............................

Answer: 2nd option, Rotation

I hope this helps, and Stay Safe! :)

Answer:

See the explanation below.

Explanation:

This analysis can be easily deduced by means of Newton's second law which tells us that the sum of the forces or the total force on a body is equal to the product of mass by acceleration.

∑F = m*a

where:

F = total force [N]

m = mass [kg]

a = acceleration [m/s²]

We must clear the acceleration value.

[tex]a=\frac{F}{m}[/tex]

We see that the term of the mass is in the denominator, so that if the value of the mass is increased the acceleration decreases, since they are inversely proportional.

Answer:

B

Explanation:

I think this one is correct

c it is a answer of this question

Answer:

Photodiodes are used in consumer electronics devices such as compact disc players, smoke detectors, medical devices and the receivers for infrared remote control devices used to control equipment from televisions to air conditioners. For many applications either photodiodes or photoconductors may be used.

Answer:

Atmospheric Pressure

Explanation:

Answer:

D i think

Explanation:

dont need a explanation it's just D

Answer:

the net force /resultant force is 0N

Explanation:

this is because newton's first law states that when there was no resultant force, the object will continue in its state of rest or uniform motion in a straight line.

as a result, the box is at rest. this the net for certain which is the resultant force is 0N, this doesn't mean that there is no force, it is just that the total force (after subtracting) is 0N

hope this helps,

Answer:

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question we have

force = 48 × 3

We have the final answer as

Hope this helps you

Answer:

See the answer below

Explanation:

According to Amonton's law, the pressure of a gas is directly proportional to the temperature of its molecules given that the volume remains constant.

Hence, if the temperature of a tyre increases, heat is transferred to the air molecules within the tyre leading to an increase in the air temperature. The air thus exerts more pressure on the tyre in agreement with Amonton's law.