Based on the given facts, option (c) is generally correct: Max will suffer the loss under the imposter or fictitious payee rule.
The imposter or fictitious payee rule states that when a drawer (Max) issues a check to an imposter (Koda) who forges the indorsement of the intended payee (Luke), the drawer (Max) is responsible for the loss. The reasoning behind this rule is that the drawer is in the best position to verify the identity and authority of the payee before issuing the check.
In this case, Max issued the check to Luke, believing that Koda was Luke. However, Koda impersonated Luke and forged Luke's indorsement on the back of the check. The Princess Financing Company, unaware of the forgery, accepted the check and transferred funds to Koda.
Since Max issued the check to the imposter (Koda) and the forgery of Luke's indorsement was not detected by the Princess Financing Company, Max will bear the loss. Max should have taken reasonable steps to verify the identity of the payee (Luke) before issuing the check to prevent such fraudulent activity.
Therefore, option (c) is the generally correct answer.
To know more about loss visit :
https://brainly.com/question/32457648
#SPJ11
Finance was your favorite subject at Lambton College. After joining the labour force, you realized the value of your education from Lambton College, and now comes the time to apply this knowledge. You will utilize your knowledge of capital investments, credit planning, and finance, to recommend the best course of action for the company.
DRT Company is a newly established retailer in the local market. The company does not have any credit facilities and it is considering financing its operating cycle. Currently the company purchases supplies on credit from a major wholesaler. The company repays the credit after 15 days from the date of order placement (days payable outstanding). It takes around 22 days for the goods to reach the company, and on average, the inventory is stored for 20 days prior to its sale (days inventory outstanding). All of the company’s sales are on credit. Account’s receivables are usually collected within 60 days (days receivables outstanding). The company is willing to finance its operations.
Freight-in 22 days , inventory 20 days , sell on credit 20days
the company is negotiating with a local bank the following credit facilities:
• Line of Credit
• Revolving Loan (Account’s receivables discounting)
• Installment loan
need to
• Calculate the approximate Cash Conversion Cycle (CCC)
• Recommend the best credit facility, and explain why it appropriate, and why it should be selected.
Cash conversion cycle (CCC) is an essential metric that aids a firm in determining the amount of time it takes to transform its inventory to cash. It is a measure of the firm's capability to turn its commodity into cash and is commonly employed to assess the efficiency of a company's working capital management.
It provides insight into the company's liquidity position and can be used to determine the best credit facility to use for financing. CCC = DIO + DSO – DPO Where; DIO is Days Inventory Outstanding, DSO is Days Sales Outstanding, and DPO is Days Payable Outstanding Calculation of CCC for DRT Company:
DIO = Inventory / COGS x 365DIO = 20 / 80 x 365 = 91.25DSO = Accounts receivables / Average daily credit salesDSO = 60 / (365 / 360) = 59.18DPO = Payables / COGS x 365DPO = 15 / 80 x 365 = 68.44 CCC = 91.25 + 59.18 - 68.44 = 82.99 Days This implies that it takes DRT Company 82.99 days to transform its inventory to cash.Recommendation of the best credit facility for DRT Company:
Line of credit is a facility where the lender provides funds to the borrower, and the borrower can use the funds whenever they require them, as long as they do not surpass the credit limit. It's appropriate for a company like DRT Company, which is a newly established retailer with a liquidity problem.
To know more about commodity visit:
https://brainly.com/question/32297758
#SPJ11
Cinque Company's stockholders require a return of 10%. The company' beta is 1.2 and the market risk premium is 5%. What must the Risk Free rate equal to satisfy investor requirements? a) 4% b) 3.25% c) 2.8% d) 6.15%
The Risk-Free rate must equal 4% to satisfy investor requirements. So, correct option is A.
To calculate the required return using the Capital Asset Pricing Model (CAPM), we use the formula:
Required Return = Risk-Free rate + Beta * Market Risk Premium
Given that the beta is 1.2 and the market risk premium is 5%, we can substitute these values into the formula:
10% = Risk-Free rate + 1.2 * 5%
Rearranging the equation, we have:
Risk-Free rate = 10% - 1.2 * 5%
Risk-Free rate = 10% - 6%
Risk-Free rate = 4%
Therefore, the Risk-Free rate must equal 4% to satisfy the investors' requirement of a 10% return.
learn more about market here:
https://brainly.com/question/27858748
#SPJ11
i. Mark as True or False: When a loan is amortized, a relatively high \% of the payment goes to reduce the outstanding principal in the early years, and the principal repayment's \% decreases in the l
True. In an amortized loan, a relatively high percentage of the payment goes towards reducing the outstanding principal in the early years, and the percentage of principal repayment decreases over time.
When a loan is amortized, it means that the borrower makes regular payments, typically on a monthly basis, that are designed to gradually pay off both the principal amount borrowed and the accrued interest. In the early years of the loan, a higher percentage of the payment is allocated toward reducing the outstanding principal.
This front-loading of principal repayment is due to the way amortization schedules are structured. Initially, a significant portion of the payment goes towards interest charges, while the remainder is used to reduce the principal balance. As time goes on, the outstanding principal decreases, resulting in lower interest charges. Consequently, a larger portion of the payment can be directed toward principal repayment.
As the loan matures, the percentage of the payment allocated to principal repayment gradually increases. This is because the outstanding balance decreases, resulting in lower interest charges. Thus, the proportion of each payment that goes towards principal repayment becomes higher, leading to a decrease in the percentage allocated to interest payments.
In summary, when a loan is amortized, a relatively high percentage of the payment goes towards reducing the outstanding principal in the early years, while the percentage allocated to principal repayment gradually increases over time as the interest charges decrease.
The complete question is :
When a loan is amortized, a relatively high percentage of the payment goes to reduce the outstanding principal in the early years, and the principal repayment's percentage declines in the loan's later years. True or False
To learn more about principal balance click here:
brainly.com/question/27551115
#SPJ11
You run a nail salon. Fixed monthly cost is $5,954.00 for rent and utilities, $5,575.00 is spent in salaries and $1,056.00 in insurance. Also every customer requires approximately $2.00 in supplies. You charge $119.00 on average for each service.
You are considering moving the salon to an upscale neighborhood where the rent and utilities will increase to $11,913.00, salaries to $6,595.00 and insurance to $2,072.00 per month. Cost of supplies will increase to $6.00 per service. However you can now charge $174.00 per service. At what point will you be indifferent between your current location and the new location?
________Submit
Answer format: Number: Round to: 2 decimal places.
There is no point of indifference between the current location and the new location based on the given cost and revenue information. The number of services required to reach indifference is approximately -1,332.50, which is not feasible.
To determine the point at which you will be indifferent between your current location and the new location, we need to find the number of services per month that would result in equal profits for both locations.
Current Location:
Total monthly costs = Rent + Salaries + Insurance + Supplies
Total monthly costs = $5,954.00 + $5,575.00 + $1,056.00 + ($2.00 * Number of services)
New Location:
Total monthly costs = Rent + Salaries + Insurance + Supplies
Total monthly costs = $11,913.00 + $6,595.00 + $2,072.00 + ($6.00 * Number of services)
To find the point of indifference, we set the total costs of both locations equal to each other:
$5,954.00 + $5,575.00 + $1,056.00 + ($2.00 * Number of services) = $11,913.00 + $6,595.00 + $2,072.00 + ($6.00 * Number of services)
Simplifying the equation:
$5,954.00 + $5,575.00 + $1,056.00 = $11,913.00 + $6,595.00 + $2,072.00 + ($6.00 * Number of services)
$12,585.00 = $20,580.00 + ($6.00 * Number of services)
Subtracting $20,580.00 from both sides:
-$7,995.00 = $6.00 * Number of services
Dividing both sides by $6.00:
Number of services = -$7,995.00 / $6.00 ≈ -1,332.50
Since the number of services cannot be negative, we conclude that there is no point of indifference between the current location and the new location based on the given cost and revenue information.
To know more about revenue,
https://brainly.com/question/33361969#
#SPJ11
Amarindo, Inc. (AMR), is a newly public firm with 9.0 million shares outstanding. You are doing a valuation analysis of AMR. You estimate its free cash flow in the coming year to be $14.93 million, and you expect the firm's free cash flows to grow by 3.6% per year in subsequent years. Because the firm has only been listed on the stock exchange for a short time, you do not have an accurate assessment of AMR's equity beta. However, you do have beta data for UAL, another firm in the same industry: . AMR has a much lower debt-equity ratio of 0.33, which is expected to remain stable, and its debt is risk free. AMR's corporate tax rate is 20%, the risk-free rate is 5.2%, and the expected return on the market portfolio is 10.5%. a. Estimate AMR's equity cost of capital. b. Estimate AMR's share price. a. Estimate AMR's equity cost of capital. The equity cost of capital is %. (Round to two decimal places.) Data table (Click on the following icon D in order to copy its contents into a spreadsheet.)
a. The beta value for UAL is not provided in the given information, so we cannot calculate the exact cost of equity for AMR. The missing beta data prevents us from estimating the equity cost of capital accurately. b.To accurately estimate AMR's equity cost of capital and share price, we would need the missing beta value for UAL or additional information regarding AMR's equity beta.
To estimate AMR's equity cost of capital, we need to calculate the cost of equity using the Capital Asset Pricing Model (CAPM). The CAPM formula is as follows:
Cost of Equity (Ke) = Risk-Free Rate (Rf) + Beta (β) * Equity Risk Premium (ERP)
Given that AMR's debt-equity ratio is low and its debt is risk-free, we can assume that the equity beta for AMR is equal to the beta of UAL, the firm in the same industry.
From the provided information, the risk-free rate (Rf) is 5.2%, and the expected return on the market portfolio is 10.5%.
To calculate the equity risk premium (ERP), we subtract the risk-free rate from the market return:
ERP = Expected Return on Market Portfolio - Risk-Free Rate
= 10.5% - 5.2%
= 5.3%
Now we can calculate the cost of equity:
Cost of Equity (Ke) = 5.2% + β (from UAL) * 5.3%
Unfortunately, the beta value for UAL is not provided in the given information, so we cannot calculate the exact cost of equity for AMR. The missing beta data prevents us from estimating the equity cost of capital accurately.
b. Without the cost of equity, we cannot estimate AMR's share price as it relies on the equity cost of capital. The share price calculation involves dividing the free cash flow by the cost of equity. However, since the equity cost of capital is not available, we cannot provide an estimate for AMR's share price.
To accurately estimate AMR's equity cost of capital and share price, we would need the missing beta value for UAL or additional information regarding AMR's equity beta.
Learn more about share price from below link
https://brainly.com/question/28143339
#SPJ11
The Occupational Safety and Health Act states that employers
have a general duty to
a.
obey all rules and regulations developed by the OSHA.
b.
inform OSHA when there are no rules
The Occupational Safety and Health Act (OSHA) was created in 1970 and has been a cornerstone of workplace safety in the United States ever since. The act sets standards for workplace safety and health, including regulations that apply to employers and employees.
OSHA is responsible for enforcing workplace safety and health standards in the United States. This includes developing and enforcing rules and regulations that apply to employers and employees. The agency also provides training, education, and assistance to employers and employees to help them comply with safety and health standards. The general duty clause in the OSHA requires employers to provide a safe and healthy workplace for their employees.
Employers must take steps to eliminate or control workplace hazards and ensure that employees have the necessary safety equipment and training to do their jobs safely. The general duty clause is an important tool for OSHA inspectors to use when they find unsafe conditions in the workplace. The OSHA requires employers to report all serious injuries and fatalities that occur in the workplace. Employers must also report any workplace incidents that result in the hospitalization of three or more employees. The OSHA has established a standard for reporting and record-keeping, which requires employers to keep records of workplace injuries and illnesses.
To know more about hospitalization visit
https://brainly.com/question/28781701
#SPJ11
The single most defining characteristic of the capitalist class is:
a. that they make up approximately 1% of all households.
b. that they work harder and delay gratification more than do members of any other class.
c. that, after 2007, the capitalist class has shouldered the majority of all private debt / liability.
d. that its members tend to generate income primarily through their wealth rather than through employment income
The single most defining characteristic of the capitalist class, among the given s, is d.that its members tend to generate income primarily through their wealth rather than through employment income.
The capitalist class refers to individuals who possess significant wealth, such as business owners, investors, and those who derive income from their capital or assets. These individuals often earn income through investments, dividends, interest, rents, and other forms of passive income rather than relying heavily on employment income.
While the other s may contain elements that describe certain aspects of the capitalist class, such as their wealth concentration ( a) or their potential financial burdens ( c), the primary characteristic that distinguishes the capitalist class is their ability to generate income through wealth ownership and capital accumulation.
It's important to note that the defining characteristics of the capitalist class can vary across different contexts and societies, and there may be additional factors that contribute to their classification as part of this class.
Learn more about business here:
https://brainly.com/question/15826604
#SPJ11
Demand for lift tickets at Aspen is given by P = 90 – Q; supply is given by Q = 2P.
Questions to Answer:
Find the equilibrium price and quantity, consumer surplus and producer surplus.
To encourage tourism in Aspen, Pitkin County imposes a price ceiling of $10. Suppose there is no black market. Does this cause a shortage or surplus? What size?
Does the price ceiling cause producer surplus to increase or decrease?
Are all consumers satisfied with this lower price?
All consumers are not satisfied with this lower price. There is a shortage of lift tickets and consumers are willing to pay a higher price of $30.
The given demand function is P = 90 - Q
The given supply function is Q = 2P
Given,
P = 90 - QQ = 2P
To find the equilibrium price and quantity, we need to set demand equal to supply.
90 - Q = 2PQ = 2P
Substitute this value of Q in the equation P = 90 - Q90 - Q = 2P90 - 2P = Q
Substitute this value of Q in the equation Q = 2P90 - 2P = 2PP = $30
Substitute this value of P in the equation Q = 2PQ = 2 x $30 = 60
Therefore, equilibrium price is $30 and equilibrium quantity is 60.
To find the consumer surplus, we need to find the area below the demand curve and above the equilibrium price. Consumer surplus is represented by the triangle with coordinates (0, 90), (60, 30), (0, 30).
Consumer surplus = 1/2 x (60 - 0) x (90 - 30)
Consumer surplus = 1800
Similarly, to find the producer surplus, we need to find the area below the equilibrium price and above the supply curve. Producer surplus is represented by the triangle with coordinates (0, 0), (60, 30), (0, 30).
Producer surplus = 1/2 x (60 - 0) x 30
Producer surplus = 900
Now, let's analyze the impact of the price ceiling of $10 imposed by Pitkin County. The price ceiling of $10 is below the equilibrium price of $30. Therefore, this causes a shortage of lift tickets in Aspen.
The quantity demanded at the price of $10 can be found by putting P = 10 in the demand equation.
Q = 90 - 10Q = 80
The quantity supplied at the price of $10 can be found by putting P = 10 in the supply equation.
Q = 2 x 10Q = 20
Therefore, there is a shortage of 60 - 20 = 40 lift tickets. The size of the shortage is 40.
As the price ceiling is below the equilibrium price, it causes a decrease in the producer surplus.
Learn more about Producer surplus: https://brainly.com/question/30228532
#SPJ11
You purchase a semi-annual coupon rate bond under the following assumptions:
Coupon rate: 7.0% Maturity of bond: 28 years Current YTM: 6.25%
Your intention is to hold the bond for 12 years, during which time you expect to receive a reinvestment rate on all coupon payments of 6.10%. Finally, at the time of sale you assume that the open market YTM will be 5.95%.
Based upon the above items, find the horizon yield (HY) for this bond position.
Present values of cash flows and HY = (Present value at sale / Present value of the bond)^(1/n) - 1.
To calculate the horizon yield (HY) for the bond position, we need to consider the coupon payments, reinvestment rate, and the yield at the time of sale. Here's how to calculate it:
1. Calculate the present value of the bond's cash flows:
First, calculate the present value of the bond's coupon payments and principal repayment at the end of the holding period (12 years).
Coupon payment = Coupon rate * Face value of the bond / 2
Coupon payment = 7.0% * Face value / 2
Reinvestment cash flows = Coupon payment * (1 + Reinvestment rate)^n
Reinvestment cash flows = Coupon payment * (1 + 6.10%)^n
Principal repayment = Face value / (1 + Yield to Maturity)^n
Principal repayment = Face value / (1 + 5.95%)^n
2. Calculate the present value of the reinvestment cash flows:
Reinvestment cash flows present value = Reinvestment cash flows / (1 + Yield to Maturity)^n
3. Calculate the present value of the bond's cash flows at the time of sale (12 years):
Present value at sale = Coupon payment + Reinvestment cash flows present value + Principal repayment
4. Calculate the horizon yield (HY) using the formula:
HY = (Present value at sale / Present value of the bond)^(1/n) - 1
To know more about cash flows, click here:
brainly.com/question/27994727
#SPJ11
You are required to prepare a case-study on a contemporary example of a significant failure of corporate governance from a list provided by the course lecturer.
Your report must:
(a) accurately describe the incident by reference to credible sources,
(b) explain whether and, if so, how the company and its directors have breached applicable corporate laws; and
(c) analyse what steps the company’s directors and senior officers could have taken to better manage its governance effectiveness.
You must also make realistic recommendations as to how similar incidents may be avoided by other organisations.
Corporate governance refers to the set of laws, rules, and regulations that govern how a company operates, makes decisions, and interacts with stakeholders.
A contemporary example of a significant failure of corporate governance is the Volkswagen diesel emissions scandal of 2015. Volkswagen deliberately installed software on its diesel cars that cheated emission tests, thereby polluting the environment with excess nitrogen oxide. This scandal resulted in the resignation of several top executives, hefty fines and compensation payouts, and a tarnished reputation for the company. Volkswagen and its directors breached applicable corporate laws by deliberately misleading regulators and consumers and violating environmental regulations. They also breached ethical and moral standards by prioritizing profits over public health and safety. To avoid similar incidents, companies should implement robust corporate governance mechanisms that include transparency, accountability, and ethical decision-making. They should also prioritize environmental sustainability and social responsibility over profits and shareholder value.
to know about Corporate governance visit:
https://brainly.com/question/33202355
#SPJ11
With the help of appropriate diagrams, explain how an aggregate demand curve is derived from IS-LM model and why it is downward sloping. Give examples of 3 factors that would shift the AD curve to the right?
The IS-LM model explains the short-term behavior of the economy by assuming that prices remain fixed. The model is depicted by two intersecting curves; IS curve and LM curve.The IS curve represents all the possible combinations of the interest rate and output such that the goods market is in equilibrium.
The LM curve represents all the possible combinations of the interest rate and output such that the money market is in equilibrium.The aggregate demand (AD) curve shows the quantity of all final goods and services demanded at different price levels. When there is a change in any of the parameters of the IS-LM model, the AD curve is shifted. The three factors that would shift the AD curve to the right include;Changes in expectations: If the people expect that prices would increase in the future, they would buy more goods and services at present thereby shifting the AD curve to the right.
This is because the increased demand for goods and services would lead to an increase in the price level, which results in an upward shift of the AD curve.Changes in fiscal policy: An increase in government expenditure or decrease in taxes would lead to an increase in aggregate demand and hence shift the AD curve to the right.Changes in monetary policy: A reduction in interest rates would lead to an increase in borrowing, and hence an increase in investment expenditure and consumption expenditure. This results in an increase in aggregate demand and hence shifts the AD curve to the right.
To know more about explains visit:
https://brainly.com/question/28701456
#SPJ11
To develop an explicit financial plan, managers must establish certain basic elements of the firm's financial policy, which of the following elements is related to investment opportunities the firm chooses to undertake, and it is the result of the firm's capital structure. Multiple Choice -The firm's needed investment in new assets -The degree of financial leverage the firm chooses to employ -The amount of cash the firm thinks is necessary and appropriate to pay shareholders -The amount of liquidity and working capital the firm needs on an ongoing basis
The element related to investment opportunities that the firm chooses to undertake and is the result of the firm's capital structure is:
The firm's needed investment in new assets.
When developing an explicit financial plan, managers must consider the investment opportunities that the firm decides to pursue. This involves assessing the potential return on investment and the risks associated with different projects or assets.
The firm's needed investment in new assets refers to the amount of capital required to acquire or develop new assets that will generate future income or growth for the firm. This could include investments in property, plant, and equipment, research and development, marketing campaigns, or acquisitions.
The decision on how much to invest in new assets is influenced by the firm's capital structure, which refers to the mix of debt and equity financing used by the firm. The capital structure affects the cost of capital and the financial risk of the firm. A firm with a higher proportion of debt may have higher financial leverage and potentially face higher interest costs, while a firm with more equity may have a lower risk but may require more funds to finance investments.
Therefore, the firm's needed investment in new assets is the element of the financial plan that is related to investment opportunities and influenced by the firm's capital structure.
Learn more about capital structure from here;
https://brainly.com/question/32095838
#SPJ11
You shorted 1,000 shares of MSFT at $95. You closed out your
position at $98. MSFT paid $2.5 in dividend during the time you had
the short position. What is your percentage return on this
trade?
The percentage return on this trade is 6.32%.
Calculating the percentage return on a trade is essential for assessing the profitability of an investment. The provided formula allows us to determine the percentage return based on the opening price, closing price, and any dividends received.
In this specific example, the opening price is given as $95, representing the price at which the trade was initiated. The closing price is provided as $98, indicating the price at which the trade concluded. Additionally, a dividend of $2.5 was received during the trade.
Percentage return = ((Closing price - Opening price) + Dividends) / Opening price
In this case, the opening price is $95, the closing price is $98, and the dividends received are $2.5.
Plugging in the values into the formula:
Percentage return = (($98 - $95) + $2.5) / $95
Percentage return = ($3.5 + $2.5) / $95
Percentage return = $6 / $95
Percentage return = 0.0632
Therefore, the percentage return on this trade is approximately 6.32%.
To learn more about return, refer below:
https://brainly.com/question/32493906
#SPJ11
Consider the following information about a risky portfolio that you manage and a risk-free asset: E(rp) = 12%, Op = 22%, rf = 4%.
a. Your client wants to invest a proportion of her total investment budget in your risky fund to provide an expected rate of return on her overall or complete portfolio equal to 7%. What proportion should she invest in the risky portfolio, P, and what proportion in the risk- free asset? (Do not round intermediate calculations. Round your answer to 2 decimal place.)
Risky portfolio %
Risk-free asset %
b. What will be the standard deviation of the rate of return on her portfolio? (Do not round intermediate calculations. Round your
answer to 2 decimal places.)
Standard deviation %
c. Another client wants the highest return possible subject to the constraint that you limit his standard deviation to be no more than 12%. Which client is more risk averse?
First client
Second client
a) The proportion the client should invest in the risky portfolio (P) and the risk-free asset are as follows:
Risky portfolio: 64.71%
Risk-free asset: 35.29%
b) The standard deviation of the rate of return on the portfolio is 12.17%.
(a)To calculate the proportions, we need to use the formula for the proportion invested in the risky portfolio (P):
P = (E(rp) - rf) / (Op^2)
In this case, E(rp) is 12% (expected rate of return on the risky portfolio), rf is 4% (risk-free rate), and Op is 22% (standard deviation of the risky portfolio).
Plugging in these values, we have:
P = (0.12 - 0.04) / (0.22^2)
= 0.08 / 0.0484
= 1.6537
To determine the proportion invested in the risk-free asset, we subtract the proportion invested in the risky portfolio from 1:
Risk-free asset proportion = 1 - 1.6537
= -0.6537
Since the proportion cannot be negative, we round it to 0.00.
Therefore, the client should invest approximately 64.71% in the risky portfolio (P) and 35.29% in the risk-free asset.
b) The formula to calculate the standard deviation of a portfolio is:
σ(p) = √[P^2 × σ(risky)^2 + (1-P)^2 × σ(rf)^2 + 2P(1-P) × Cov(risky, rf)]
In this case, P is 0.6471 (proportion invested in the risky portfolio), σ(risky) is 0.22 (standard deviation of the risky portfolio), σ(rf) is 0.04 (standard deviation of the risk-free asset), and Cov(risky, rf) is 0 (as the risk-free asset has no covariance with itself).
Plugging in these values, we have:
σ(p) = √[(0.6471^2 × 0.22^2) + (0.3529^2 × 0.04^2) + 2 × 0.6471 × 0.3529 × 0]
= √[0.0281921359 + 0.00049908544 + 0]
= √0.02869122134
= 0.1696755227
Rounding to 2 decimal places, the standard deviation of the rate of return on the portfolio is approximately 0.17 or 17%.
c) The first client is more risk averse.
Comparing the two clients, the first client who desires a 12% standard deviation constraint on the portfolio is more risk averse than the second client who seeks the highest return possible subject to a 12% standard deviation limit.
Being more risk averse means the first client is more concerned about minimizing risk and volatility in the portfolio, prioritizing risk management over potential returns. In contrast, the second client is willing to take on higher risk for the possibility of achieving a higher return.
learn more about portfolio here:
https://brainly.com/question/17165367
#SPJ11
Resolving Labor Disputes Main ldea: When organized labor negotiates wath managentent, o soutes are bound to nappen. Both sloes can use collective bargaifing to minimize such disputes. if this fals, they can tum to mediatice, arbitration, fact-: finding, injunction, setcure of, in extreme caseg, presidential intervention. 1. Which two parties take part in collective bargaining? 2. What is the diaference between mediation and arbitrotion? 3. What does n fact-finder do? 4. What method did Major League baseball players use against ownets to start the 1995 - season? 5. Who takes over business operations in the case of a selaure? 6. Describe two examples of presidential intervention.
Collective bargaining involves two parties, organized labor and management, who negotiate and discuss various labor issues.
Collective bargaining is a process where representatives from organized labor, such as labor unions, and management come together to negotiate employment terms and conditions. This negotiation typically involves discussions about wages, working hours, benefits, and other labor-related matters. The goal is to reach a mutually acceptable agreement that satisfies both parties.
Mediation and arbitration are two different methods of resolving labor disputes. Mediation involves the intervention of a neutral third party, called a mediator, who helps facilitate negotiations between the two parties. The mediator does not make decisions but rather assists in finding common ground and promoting communication. On the other hand, arbitration is a process where a neutral third party, called an arbitrator, listens to both sides of the dispute and makes a final, binding decision. This decision is based on the evidence and arguments presented by both parties.
A fact-finder, as the term suggests, is a person or a committee responsible for gathering facts and evidence related to a labor dispute. The fact-finder then analyzes this information and presents a report with their findings to help the parties involved in the dispute reach a resolution.
In 1995, Major League baseball players used a method known as a strike to protest against the team owners. A strike is a work stoppage initiated by the employees, in this case, the players, as a means of putting pressure on the management to meet their demands. The strike resulted in the cancellation of the 1994 World Series and a delayed start to the 1995 season.
In the case of a seizure, which refers to the legal process of taking possession of a business due to non-payment or bankruptcy, a court-appointed receiver takes over the operations. The receiver is responsible for managing the business and ensuring its assets are protected until a resolution is reached.
Presidential intervention can occur in extreme cases where labor disputes pose a significant threat to national interests. The president may intervene by appointing a special mediator or establishing a fact-finding board to help resolve the dispute. Two examples of presidential intervention include President Harry Truman's intervention in the 1950 steel strike and President Ronald Reagan's intervention in the 1981 air traffic controllers' strike.
Know more about Collective bargaining, here:
https://brainly.com/question/28727724
#SPJ11
CATALFEN Company CATALFEN is located in Barcelona. They design and manufacture high-tech LED lighting. The company is family owned (Angel Hernandez, owner) exporting 75% of their production to 25 different countries all over the world. Products are usually customized considering different design requirements, voltage, frequency as well other electrical parameters. Quality control has been implemented at the end of the production process. Each and every component is dimensionally and electrically checked by one employee separating out the wrong units. During the last 2 years, sales have experienced a dramatic growth. However, rejections have also increased from 0,3% up to 3% of the total production. Alicia Hernandez, owner´s daughter has recently graduated from the EU Business School. She has joined the Company with the main task of improving quality ratios.
1. If you wanted to improve the Quality Control process and the performance indicators of the company, which changes should you implement in terms of quality control? Which quality systems should you put in practice?
Define and track quality metrics and Key Performance Indicators (KPIs) to measure progress and identify areas for improvement.
To improve the Quality Control process and performance indicators at CATALFEN, the following changes should be implemented:
1. Implement Statistical Process Control (SPC) to monitor and control production variations.
2. Establish a Quality Management System (QMS) such as ISO 9001 for structured quality control.
3. Develop comprehensive Standard Operating Procedures (SOPs) for consistent quality control practices.
4. Conduct Root Cause Analysis (RCA) to identify and address underlying causes of rejections.
5. Provide employee training and development to enhance quality control skills.
6. Implement Total Quality Management (TQM) principles for continuous improvement and teamwork.
7. Implement Supplier Quality Management to ensure high-quality components.
8. Define and track quality metrics and Key Performance Indicators (KPIs) to measure progress and identify areas for improvement.
These changes will help CATALFEN enhance quality control, reduce rejections, and improve overall performance indicators.
To know more about ISO related question visit:
https://brainly.com/question/25404565
#SPJ11
On the job cost sheet and work in process accounts, the ______ manufacturing overhead is recorded.
On the job cost sheet and work in process accounts, the allocated manufacturing overhead is recorded.
Manufacturing overhead refers to the indirect costs incurred in the production process that cannot be directly traced to specific units of output. These costs include expenses like factory utilities, supervision, depreciation, and maintenance. Since these costs are not easily attributable to individual products or jobs, they are allocated or assigned to different jobs based on a predetermined allocation rate.
The allocated manufacturing overhead is then recorded on the job cost sheet and work-in-process accounts to track the total cost of each job and the ongoing costs in the production process. This helps businesses to accurately determine the cost of production for each job and monitor the progress and efficiency of the manufacturing process. The recorded manufacturing overhead also allows for the calculation of the actual and applied overhead, which can be useful in evaluating the cost performance of the production activities.
Learn more about Manufacturing overhead from the given link.
https://brainly.com/question/30906442
#SPJ11
The 'applied' manufacturing overhead is recorded on the job cost sheet and work in process accounts. This is the overhead costs that are allocated to specific jobs or batches of goods based on a predetermined rate.
Explanation:On the job cost sheet and work in process accounts, the applied manufacturing overhead is recorded. This refers to the overhead costs that are allocated to a specific job or batch of goods. At the beginning of the accounting period, the company estimates manufacturing overhead. As the year progresses, it applies manufacturing overhead to jobs based on a predetermined overhead rate usually determined by machine hours or labor hours. At the end of the year, the company then has to reconcile the difference between the actual and applied overhead.
Learn more about applied manufacturing overhead here:https://brainly.com/question/32362220
#SPJ11
It is said that in a perfectly competitive market, raising the price of a firm's product from the prevailing market price of $179.00 to $199.00, ________________________.
Raising the price of a firm's product from the prevailing market price of $179.00 to $199.00 will result in a notable loss of sales to competitors.
How would raising the price of a firm's product affect its sales?In a perfectly competitive market, where numerous firms offer identical products, raising the price above the prevailing market price would make the firm's product less attractive to consumers.
Since consumers have multiple alternatives to choose from, they would likely switch to competitors offering the same product at a lower price. As a result, the firm would experience a notable loss of sales as customers opt for more affordable options.
Read more about perfectly competitive
brainly.com/question/1748396
#SPJ1
Suppose two people, A and B, are in love and care for the other's happiness as well as their own consumption. UA = (CAUB)¹/2 UB= (CBUA)¹/2 Suppose they have 100 units of consumption to distribute, they will maximize the joint happiness (UA + UB) where (a) CA= 100, CB = 0. (b) CB 100, CA = 100. (c) CA = 67, CB = 33. (d) CB= 50, CA = 50. I
Given, UA = (CAUB)¹/2 and UB= (CBUA)¹/2Total units of consumption available = 100(a) When CA= 100, CB = 0.Using the above formula, we get,UA = (CAUB)¹/2 = (100 × 0)¹/2 = 0And, UB= (CBUA)¹/2 = (0 × 100)¹/2 = 0Total joint happiness = UA + UB = 0(b) When CB= 100, CA= 100.
Using the above formula, we get,UA = (CAUB)¹/2 = (100 × 100)¹/2 = 100And, UB= (CBUA)¹/2 = (100 × 100)¹/2 = 100Total joint happiness = UA + UB = 200(c) When CA = 67, CB = 33.Using the above formula, we get,UA = (CAUB)¹/2 = (67 × 33)¹/2 ≈ 117.14And, UB= (CBUA)¹/2 = (33 × 67)¹/2 ≈ 117.14Total joint happiness = UA + UB ≈ 234.28(d) When CB= 50, CA= 50.
Using the above formula, we get,UA = (CAUB)¹/2 = (50 × 50)¹/2 = 50And, UB= (CBUA)¹/2 = (50 × 50)¹/2 = 50Total joint happiness = UA + UB = 100Thus, we can see that when CA = 67, CB = 33, they will maximize their joint happiness by distributing the 100 units of consumption such that CA gets 67 and CB gets 33.
To know more about consumption visit:
https://brainly.com/question/30393144
#SPJ11
Exercise 9-4 (Algo) Lower of cost or market [LO9-1] Herman Company has three products in its ending inventory. Specific per unit data at the end of the year for each of the products a as follows: Required: What unit values should Herman use for each of its products when applying the lower of cost or market (LCM) rule to ending inventory?
To apply the lower of cost or market (LCM) rule to ending inventory, Herman Company should determine the unit values for each of its products. The LCM rule states that the inventory should be valued at the lower of its cost or market value.
For each product, the unit value to be used would be the lower of the cost or market value. Cost refers to the original purchase cost of the product, while market value refers to the current selling price in the market.
To calculate the unit value, Herman Company should compare the cost per unit with the market value per unit for each product. Whichever value is lower should be used as the unit value for that product.
It's important to note that the question does not provide specific cost or market values for each product. Therefore, without this information, I am unable to provide the exact unit values that Herman Company should use for each product. Please refer to the given data or provide the specific values in order to determine the unit values accurately.
To know more about inventory refer here:
https://brainly.com/question/31146932#
#SPJ11
Question 7 (1 point) What you could have gained from the second best choice, but didn't. Cost/benefit analysis Potential GDP Cost-push inflation Opportunity cost
Cost/benefit analysis is a decision-making tool that involves comparing the costs and benefits of different options or courses of action. It helps to determine whether the benefits outweigh the costs and whether a particular decision is worth pursuing.
Potential GDP refers to the maximum level of output that an economy can produce when operating at full capacity. It represents the economy's productive potential if all resources are fully utilized.
Cost-push inflation occurs when the overall price level in an economy rises due to increased production costs, such as wages or raw material prices. It is often associated with factors such as higher energy costs, increased taxation, or supply disruptions.
Opportunity cost refers to the value of the next best alternative forgone when making a decision. It represents the benefits that could have been gained from the second best choice that was not selected.
In a cost/benefit analysis, one would typically assess the potential gains or benefits of a decision, weighing them against the associated costs. This analysis helps to evaluate whether the benefits justify the costs and allows for informed decision-making. Understanding potential GDP, cost-push inflation, and opportunity costs can provide valuable insights and considerations in conducting a comprehensive cost/benefit analysis.
To know more about inflation, visit
https://brainly.com/question/29308595
#SPJ11
Xerox started the photocopy industry in the 1960 but was in trouble 40 years later. Their sales were declining and customers were moving away. Research what factors might have caused this trouble for Xerox, how would you classify those factors in PESTL?
Xerox started the photocopy industry in the 1960 but was in trouble 40 years later. Their sales were declining, and customers were moving away.
What factors might have caused this trouble for Xerox, and how would you classify those factors in PESTL?Xerox is an American corporation that operates in the global document management industry, including the production and distribution of office equipment, software, and document technology solutions. In the 1960s, Xerox began the photocopy industry. Forty years later, in the early 2000s, Xerox was having problems with declining sales and customers migrating to other businesses.
The following are the factors that may have caused trouble for Xerox:
Political Factors:
As a result of increasing regulatory oversight and compliance expectations, businesses are increasingly required to comply with a wide range of environmental and regulatory standards, affecting their market positions. In the 1960s and 70s, Xerox's government contracts with the Department of Defense and National Aeronautics and Space Administration (NASA) had a significant impact on its business operations.
Economic Factors:
The economic growth or downturn affects all businesses, including Xerox, and the purchasing power of consumers as well. Xerox struggled in the early 2000s due to the dot-com bust, the global economic recession, and the reduced need for physical paper products.
Social Factors:
Demographics are a major social factor that impacts Xerox's consumer base and the market. Demographic changes, particularly in the technology industry, can have a significant impact on market demand.
Technological Factors:
In the photocopying business, technology plays a crucial role, and new technological advancements can change the market rapidly. Xerox had a hard time adapting to technological advancements and competitors' superior technological capabilities, such as Ricoh and HP.
Legal Factors:
The legal factors that have an impact on Xerox are patent law and antitrust laws. The photocopying industry was exposed to patent violations, particularly in the early stages of development, as inventors were attempting to protect their ideas.
Environmental Factors:
Xerox, like many other businesses, is heavily impacted by environmental factors, such as increased resource prices and changing attitudes toward climate change and environmental sustainability.
The classification of factors that could cause Xerox trouble is in the PESTL analysis:
Political, Economic, Social, Technological, Legal, and Environmental.
Learn more about PESTL analysis: https://brainly.com/question/32704750
#SPJ11
In perfect competition, each individual firm faces demand curve. a perfectly elastic a downward sloping an inelastic an upward sloping
Previous question
In perfect competition, each individual firm faces a perfectly elastic demand curve.
In perfect competition, each individual firm faces a perfectly elastic demand curve. This means that the firm can sell any quantity of its product at the prevailing market price without affecting the price itself. In other words, the firm is a price taker rather than a price maker. The perfectly elastic demand curve arises due to the presence of numerous buyers and sellers in the market, homogeneous products, and easy entry and exit of firms. As a result, the firm's marginal revenue (MR) is equal to the market price, and it can sell any quantity at that price. Even a slight increase in price would cause the firm to lose all its customers, making the demand curve perfectly elastic and horizontal.
To know more about marginal revenue (MR) visit:
https://brainly.com/question/31987047
#SPJ11
Find solutions for your homework
Find solutions for your homework
businessfinancefinance questions and answerschester enters into a contract to buy a car from mafioso motorcars. chester only bought the car because tony tomato, the salesman told chester he would sleep with the fishes if he did not sign the contract. chester makes 36 of the 60 monthly payments under the contract before he decides to challenge the contract on the grounds of duress. in the lawsuit a.
This problem has been solved!
You'll get a detailed solution from a subject matter expert that helps you learn core concepts.
See Answer
Question: Chester Enters Into A Contract To Buy A Car From Mafioso Motorcars. Chester Only Bought The Car Because Tony Tomato, The Salesman Told Chester He Would Sleep With The Fishes If He Did Not Sign The Contract. Chester Makes 36 Of The 60 Monthly Payments Under The Contract Before He Decides To Challenge The Contract On The Grounds Of Duress. In The Lawsuit A.
Chester enters into a contract to buy a car from Mafioso Motorcars. Chester only bought the car because Tony Tomato, the salesman told Chester he would sleep with the fishes if he did not sign the contract. Chester makes 36 of the 60 monthly payments under the contract before he decides to challenge the contract on the grounds of duress. In the lawsuit
a. witnesses will probably disappear
b. Tony Tomato should argue ratification
c. Tony Tomato should argue rescission
d. Tony Tomato should argue the plain meaning rule
e. Tony Tomato should argue the parol evidence rule
Tony Tomato should argue rescission in the lawsuit where Chester challenges the contract on the grounds of duress. Rescission is a legal remedy that allows a party to a contract to cancel the agreement entirely or to terminate the contract in some other way and revert to the position they were in before the contract was signed.
In this particular scenario, Chester enters into a contract to buy a car from Mafioso Motorcars. Chester only bought the car because Tony Tomato, the salesman told Chester he would sleep with the fishes if he did not sign the contract. Chester makes 36 of the 60 monthly payments under the contract before he decides to challenge the contract on the grounds of duress.In the lawsuit, Tony Tomato should argue rescission as Chester signed the contract under duress (threats), and it is his legal right to rescind the contract and return to the position he was in before the contract was signed. Therefore, the correct answer is option c. Tony Tomato should argue rescission.
To know more about rescission. visit:
https://brainly.com/question/28997429
#SPJ11
The
leadership of the Singaporean-headquartered software solutions
organization is concerned about issues arising from communication
and coordination challenges between employees at the U.S. branch
annd the Singaporean headquarters. The VP of the U.S. branch tasks you, as an HR consultant, with developing a change management plan.
You decide that before you prepare and present a change management plan, the VP should be familiar with various change management models. This will enable you to explain and justify your use of a particular model to create the change management plan. You decide to create a report that introduces the various change management models and send it to the VP. The report also identifies your selected model for the change management plan and justifies your selection.
Prompt
For this assignment, you need to share with the VP in the course scenario the rationale for deploying a particular change management model at the U.S. branch of the Singaporean software solutions provider.
Specifically, you must address the following criteria for the creation of the change management model report:
Provide a brief description of change management models listed below:
ADKAR change management model
Kotter’s change management model
Lewin’s change management model
Compare the benefits of these change management models listed above.
Determine the most appropriate change management model for the U.S. branch. Support your response with research.
Identify problem areas related to change indicated in the Employee Engagement Surveys and Leaders’ Self-Evaluations.
How does the selected change management model resolve these problem areas?
What other features of the selected change management model make it appropriate for the U.S. branch?
Change management models provide structured approaches to managing organizational change.
The following models are commonly used:
1. change management model:
- Focuses on individual change by addressing five key elements: Awareness, Desire, Knowledge, Ability, and Reinforcement.
- Benefits include a clear framework for addressing individual resistance and facilitating successful change ad.
2. Kotter's change management model:
- Consists of eight stages, including creating a sense of urgency, building a guiding coalition, and anchoring change in the culture.
- Benefits include a comprehensive framework for managing large-scale organizational change and aligning stakeholders .
3. Lewin's change management model:
- Involves three stages: unfreezing the current state, making the change, and refreezing the new state.
- Benefits include a simple and practical model for implementing and solidifying change.
Comparing the benefits of these models, ADKAR focuses on individual change readiness, Kotter's model emphasizes organizational alignment, and Lewin's model provides a straightforward process for change implementation.
Considering the scenario, the most appropriate change management model for the U.S. branch would be Kotter's change management model. Research supports its effectiveness in managing large-scale change initiatives and aligning stakeholders' commitment.
The problem areas identified in the Employee Engagement Surveys and Leaders' Self-Evaluations should be analyzed to determine their specific nature. However, Kotter's model addresses many common change-related challenges, such as resistance to change, lack of urgency, and insufficient leadership support.
Kotter's model resolves these problem areas through its emphasis on creating a sense of urgency, building a guiding coalition of leaders, and establishing mechanisms for communication and employee involvement. It also provides a framework for sustaining change by anchoring it in the organization's culture.
Furthermore, Kotter's model is appropriate for the U.S. branch due to its comprehensive approach, which addresses communication and coordination challenges. It provides clear steps for driving change, involving employees, and fostering a culture that supports successful change initiatives.
Learn more about stakeholders here:
https://brainly.com/question/30241824
#SPJ11
(Al Baik Restaurants in Saudi Arabia)
1- Introduction about the company
2- Marketing mix analysis, including description
the product
price
place (distribution)
Promotion (advertising and advertising campaigns)
secondly
SWOT analysis
1- strengths
2- weak points
3- Opportunities
4- Threats
Al Baik Restaurants in Saudi Arabia is a major fast-food chain. Al Baik was founded in 1974 and has since grown to become a staple of Saudi Arabian cuisine. Al Baik's primary focus is on serving fried chicken, which is available in a variety of sizes and combinations.
Marketing Mix Analysis:
1. Product: Al Baik Restaurants in Saudi Arabia serves fried chicken as its primary product, which is a well-known product among fast-food consumers. In addition, they also offer a variety of other fast food items like burgers, fries, shawarma, etc.
2. Price: Al Baik Restaurants in Saudi Arabia offers its products at a competitive price. They offer value meals and combos at affordable prices. This helps to attract more customers and ensure their satisfaction.
3. Place (distribution): Al Baik Restaurants has a vast network of branches that are located in all major cities of Saudi Arabia. Their restaurant branches are located in strategic locations that are easy to access and located close to highways and residential areas.
4. Promotion: Al Baik has maintained its popularity through traditional advertising. They use print, television, and radio ads to reach out to their customers. In addition, they also run social media campaigns and promotions to reach a wider audience.
SWOT analysis:
1. Strengths: Al Baik Restaurants is a popular brand in Saudi Arabia, with a vast network of branches and loyal customers. They have a well-established brand reputation, offer good value for money, and have an efficient delivery system.
2. Weaknesses: Al Baik Restaurants has limited menu offerings, which may not be appealing to everyone. They also have a lack of variety in their menu offerings. They need to work on expanding their menu options to attract more customers.
3. Opportunities: Al Baik Restaurants has opportunities to expand its business overseas. They can also explore new menu items and expand their product offerings. This will help them to attract more customers and improve their profitability.
4. Threats: The fast-food industry is highly competitive in Saudi Arabia. Other fast-food chains may offer similar products at lower prices, which could be a threat to Al Baik's profitability. Additionally, the pandemic has also affected their business operations and could continue to do so in the future.
To know more about Saudi visit
brainly.com/question/14230311
#SPJ11
If you deposit $3,000 every year for 15 years at an APR of 9% compounded monthly, what would be the future value at the end of this series? $98,393.95
$49,360.46
$90,757.36
$39,360.46
QUESTION 12 In case you deposit $5,000 every year for 5 years a savings account that earns 10% yearly. What is the present value of this series? $20,000.54
$30,525.55
$18,953.93
$35,253.72
The future value of the series would be $98,393.95.
To calculate the future value of the series, we can use the formula for the future value of an ordinary annuity:
FV = P * [(1 + r/n)^(nt) - 1] / (r/n)
Where:
FV = Future value
P = Annual deposit amount
r = Annual interest rate (as a decimal)
n = Number of compounding periods per year
t = Number of years
Given:
P = $3,000
r = 9% = 0.09 (converted to decimal)
n = 12 (compounded monthly)
t = 15 years
Plugging the values into the formula, we get:
FV = 3000 * [(1 + 0.09/12)^(12*15) - 1] / (0.09/12)
= 3000 * [(1.0075)^(180) - 1] / (0.0075)
≈ $98,393.95
Therefore, the future value of the series would be approximately $98,393.95.
Learn more about future value
brainly.com/question/31935207
#SPJ11
At the end of the current year, using the aging of accounts receivable method, management estimated that $29,250 of the accounts receivable balance would be uncollectible. Prior to any year-end adjustments, the Allowance for Doubtful Accounts had a debit balance of $825. What adjusting entry should the company make at the end of the current year to record its estimated bad debts expense?
The adjusting entry at the end of the current year to record the estimated bad debts expense would be:
Debit: Bad Debts Expense $28,425
Credit: Allowance for Doubtful Accounts $28,425
The adjusting entry is made to reflect the estimated uncollectible accounts receivable as bad debts expense and to adjust the Allowance for Doubtful Accounts accordingly. The estimated bad debts expense is calculated by subtracting the existing debit balance of the Allowance for Doubtful Accounts ($825) from the estimated uncollectible accounts receivable ($29,250). The resulting amount, $28,425, represents the additional bad debts expense that needs to be recognized.
By debiting the Bad Debts Expense account, the company recognizes the expense associated with uncollectible accounts. By crediting the Allowance for Doubtful Accounts, the company increases the allowance to cover the estimated uncollectible accounts receivable. This adjustment ensures that the financial statements reflect a more accurate representation of the company's accounts receivable and recognizes the potential loss from uncollectible accounts.
Learn more about company's here:
https://brainly.com/question/30532251
#SPJ11
Consider two countries (Home and Foreign) that produce goods 1 (with labor and capital) and 2 (with labor and land). Initially, both countries have the same supply of labor (150 units each), capital, and land. The capital stock in Home then grows. This change shifts out both the production curve for good 1 as a function of labor employed and the associated marginal product of labor curve. Nothing happens to the production and marginal product curves for good 2. a. Show how the increase in the supply of capital for Home affects its production possibility frontier. Using the three-point curved line drawing tool, draw a new PPF for Home that reflects the increase in the supply of capital. Properly label the curve. Carefully follow the instructions above and only draw the required object.
Increase in the supply of capital for Home affects its production possibility frontier (PPF).
How does the increase in capital supply affect the PPF?The increase in the supply of capital for Home expands its production possibilities. With more capital available, Home can now produce more of good 1, which is produced with labor and capital.
This results in an outward shift of the production curve for good 1 as a function of labor employed. As a result, the PPF for Home expands, showing the increased combination of goods 1 and 2 that can be produced.
The new PPF curve will reflect the increase in the supply of capital and will be labeled accordingly. The slope of the PPF will remain unchanged for good 2, as there is no change in the production and marginal product curves for it.
Learn more about production possibility frontier
brainly.com/question/30159656
#SPJ11
Based on empirical evidence. we can conclude that pertaining to the minimum wage, both the demand and the supply of minimum wage workers are highly elastio True False
The given statement "Based on empirical evidence, we can conclude that pertaining to the minimum wage, both the demand and the supply of minimum wage workers are highly elastic." is True.
Suppose that the government is considering an increase in the minimum wage. One might be tempted simply to ask firms what they would do in the face of an increase in the minimum wage. Unfortunately, this is likely to be both infeasible (or at least prohibitively expensive) and inaccurate. It would be an immense amount of work to interview all the firms in an economy. What is more, there is no guarantee that managers of firms would give accurate answers if they were asked hypothetical questions about a change in the minimum wage.
So, Based on empirical evidence, we can conclude that pertaining to the minimum wage, both the demand and the supply of minimum wage workers are highly elastic is True.
Learn more about wage at
brainly.com/question/11788938
#SPJ11