To calculate the distance from your school to your hometown, we can add the distance covered at a speed of 95 km/h and the distance covered at a speed of 50 km/h.
Distance covered at 95 km/h: 95 km/h * 100 km = 9500 km
Distance covered at 50 km/h: 50 km/h * (3 hours + 20 minutes) = 50 km/h * 3.33 hours = 166.5 km
Total distance = 9500 km + 166.5 km = 9666.5 km
Now, to calculate the average speed, we can divide the total distance by the total time taken.
Total time taken = 3 hours + 20 minutes = 3.33 hours
Average speed = Total distance / Total time taken
Average speed = 9666.5 km / 3.33 hours = 2901.51 km/h
Rounding to two significant figures, the average speed is approximately 2900 km/h.
Learn more about speed on:
https://brainly.com/question/17661499
#SPJ4
If the cutoff wavelength for a particular material is 697 nm considering the photoelectric effect, what will be the maximum amount of kinetic energy obtained by a liberated electron when light with a wavelength of 415 nm is used on the material? Express your answer in electron volts (eV).
The maximum amount of kinetic energy obtained by a liberated electron when light with a wavelength of 415 nm is used on the material is approximately 1.16667 x 10^-6 eV.
Max Kinetic Energy = Planck's constant (h) * (cutoff wavelength - incident wavelength)
Cutoff wavelength = 697 nm
Incident wavelength = 415 nm
Cutoff wavelength = 697 nm = 697 * 10^-9 m
Incident wavelength = 415 nm = 415 * 10^-9 m
Max Kinetic Energy =
= 6.63 x 10^-34 J s * (697 * 10^-9 m - 415 * 10^-9 m)
= 6.63 x 10^-34 J s * (282 * 10^-9 m)
= 1.86666 x 10^-25 J
1 eV = 1.6 x 10^-19 J
Max Kinetic Energy = (1.86666 x 10^-25 J) / (1.6 x 10^-19 J/eV)
= 1.16667 x 10^-6 eV
Learn more about kinetic energy here:
brainly.com/question/999862
#SPJ11
from the delta E given for 25 degrees celcius, calculate delta H at the same temperature for the reaction: 2HI-> H2 + I2 deltaE = +9.48 kJ In a dish is a population of crystals, 3 are ight blue and 1 is dark blue. I have fournd a gene (D) that determines whether or not a crystal is light or dark biue. Being a dark blue crystal is a recessive trat (genotype dd). Using the folowing equations and assuming that the population of crystals in the dish is currenty in Hardy-Weinberg equilienum tell me the frequency of the dominant allele (frequency of the deminant alele = p) and the frequency of tie recessive allele (frequency of the recessive alele a q) rounced to two decimal places as well as how many of the crystais you would expect to be heterozypous?
1. The ΔH at 25 degrees Celsius for the given reaction is +9.48 kJ.
2. The frequency of the dominant allele (p) and the recessive allele (q) in the crystal population is 0.50 each.
3. Half of the crystals in the population are expected to be heterozygous (Dd).
To calculate the change in enthalpy (ΔH) at the same temperature for the given reaction, we need to use the relationship between ΔH and ΔE (change in internal energy). The equation is as follows:
ΔH = ΔE + PΔV
However, since the reaction is not specified to be at constant pressure or volume, we can assume it occurs under constant pressure conditions, where ΔH = ΔE.
Therefore, ΔH = ΔE = +9.48 kJ.
According to the information provided, the dark blue crystal phenotype is recessive (dd). Let's use the following symbols to represent the genotypes and their frequencies:p = frequency of the dominant allele (D)
q = frequency of the recessive allele (d)
In a population in Hardy-Weinberg equilibrium, the frequencies of the alleles can be calculated using the following equations
[tex]p^2 + 2pq + q^2 = 1[/tex]
Here, [tex]p^2[/tex] represents the frequency of homozygous dominant individuals (DD), [tex]q^2[/tex] represents the frequency of homozygous recessive individuals (dd), and 2pq represents the frequency of heterozygous individuals (Dd).
Given that there are 3 light blue crystals (DD or Dd) and 1 dark blue crystal (dd), we can set up the following equations:
[tex]p^2 + 2pq + q^2 = 1[/tex]
[tex]p^2[/tex] + 2pq = 3/4 (since 3 out of 4 crystals are light blue)
[tex]q^2[/tex] = 1/4 (since 1 out of 4 crystals is dark blue)
From the equation [tex]q^2[/tex] = 1/4, we can determine the value of q:
q = √(1/4) = 0.5
Since p + q = 1, we can calculate the value of p:
p = 1 - q = 1 - 0.5 = 0.5
Therefore, the frequency of the dominant allele (D) is 0.50, and the frequency of the recessive allele (d) is also 0.50.
To determine the number of crystals that are heterozygous (Dd), we can use the equation 2pq:
2pq = 2 * 0.5 * 0.5 = 0.5
So, you would expect 0.5 or half of the crystals in the population to be heterozygous (Dd).
Learn more about frequency
brainly.com/question/29739263?
#SPJ11
From a distance of 2000 m, the sound intensity level of a rocket launch is 110 dB. What is the sound intensity level (in dB ) of the rocket launch from a distance of 20,000 m ? (For this question, your answer must be exact. There is no margin for rounding error.)
The sound intensity level of the rocket launch from a distance of 20,000 m is 90 dB.
The sound intensity level (SIL) is given by the formula:
SIL = 10 * log₁₀(I / I₀)
where I is the sound intensity and I₀ is the reference sound intensity (usually taken as 10^(-12) W/m²).
SIL₁ = 110 dB (sound intensity level at 2000 m)
d₁ = 2000 m (distance at SIL₁)
d₂ = 20000 m (distance at which we need to find the SIL)
We can use the inverse square law for sound propagation, which states that the sound intensity is inversely proportional to the square of the distance:
I₁ / I₂ = (d₂ / d₁)²
Substituting the values:
I₁ / I₂ = (20000 m / 2000 m)²
I₁ / I₂ = 10²
I₁ / I₂ = 100
Since SIL is directly proportional to the sound intensity, we can say that:
SIL₁ - SIL₂ = 10 * log₁₀(I₁ / I₀) - 10 * log₁₀(I₂ / I₀)
SIL₁ - SIL₂ = 10 * (log₁₀(I₁) - log₁₀(I₂))
SIL₂ = SIL₁ - 10 * log₁₀(I₁ / I₂)
Given SIL₁ = 110 dB, we need to calculate SIL₂.
Now, let's calculate SIL₂:
SIL₂ = 110 dB - 10 * log₁₀(I₁ / I₂)
SIL₂ = 110 dB - 10 * log₁₀(100)
SIL₂ = 110 dB - 10 * 2
SIL₂ = 110 dB - 20
SIL₂ = 90 dB
Learn more about the sound intensity at https://brainly.com/question/14349601
#SPJ11
A rod of length 1.7 m is at rest in an inertial frame S2. If S2 moves with a speed of 0.39 c with respect to a rest frame S1, what is the length of the rod as measured in frame S1, according to the special theory of relativity? Answer in units of m.
To find the length of the rod as measured in frame S1, we can plug in the given values into the length contraction formula and calculate the result. The length of the rod in frame S1 is approximately 1.383 m.
What are the major functions of the circulatory system in the human body?According to the special theory of relativity, length contraction occurs when an object is observed from a frame of reference moving at a significant fraction of the speed of light relative to another frame of reference.
The formula for length contraction is given by the Lorentz transformation:
L₁ = L₀ * √(1 - v²/c²)
Where L₁ is the measured length in the moving frame (S1), L₀ is the length in the rest frame (S2), v is the relative velocity between the frames, and c is the speed of light.
In this scenario, the rod is initially at rest in frame S2, and S2 is moving with a speed of 0.39 c relative to S1.
Learn more about length contraction
brainly.com/question/10272679
#SPJ11
"A boy throws a stone vertically upward. It takes 5 seconds for
the stone to reach the maximum height. What is the maximum
height?
The maximum height is 122.5 meters when a stone is thrown vertically upward.
Time is taken to reach the maximum height = 5 seconds
Acceleration due to gravity= -9.8 m/ second squared
After reaching the max height, its final velocity is zero. It is written as:
v = u + a*t
Assuming the final velocity is Zero.
0 = u + a*t
u = -a*t
u = -([tex]-9.8 m/s^2[/tex]) * 5 seconds
u = 49 m/s
The displacement formula is used to calculate the maximum height:
s = ut + (1/2)*[tex]at^2[/tex]
s = 49 m/s * 5 seconds + [tex](1/2)(-9.8 m/s^2)*(5 seconds)^2[/tex]
s = 245 m - 122.5 m
s = 122.5 m
Therefore, we can conclude that the maximum height is 122.5 meters.
To learn more about the maximum height
https://brainly.com/question/29116483
#SPJ4
An unpolarized light beam of intensity 1 is incident on a polarizer (with direction rotated 300 to the vertical). After passing through the polarizer, the intensity of the beam is?
c) 0.75
a) 0.25
b) 0.87
d) 0.50
The correct option is: a) 0.25
The intensity of the light beam after passing through the polarizer is 0.25.
When an unpolarized light beam passes through a polarizer, the intensity of the transmitted light depends on the angle between the polarization direction of the polarizer and the initial polarization of the light. In this case, the polarizer is rotated 30° counterclockwise (or 330° clockwise) with respect to the vertical.
The intensity of the transmitted light through a polarizer can be calculated using Malus' law:
I_transmitted = I_initial * cos²(θ)
Where:
I_transmitted is the intensity of the transmitted light
I_initial is the initial intensity of the light
θ is the angle between the polarization direction of the polarizer and the initial polarization of the light.
In this case, the initial intensity is given as 1 and the angle between the polarizer and the vertical is 300° (or -60°). However, cos²(-60°) is the same as cos²(60°), so we can calculate the intensity as follows:
I_transmitted = 1 * cos²(60°)
= 1 * (0.5)²
= 1 * 0.25
= 0.25
Therefore, the intensity of the light beam after passing through the polarizer is 0.25. Thus, the correct option is a. 0.25.
To know more about polarizer refer here: https://brainly.com/question/29217577#
#SPJ11
(a) Calculate the internal energy of 3.85 moles of a monatomic gas at a temperature of 0°C. (b) By how much does the internal energy change if the gas is heated to 485 K?
The internal energy of the monatomic gas with 3.85 moles at 0°C is 126,296.46 J. When the gas is heated to 485 K, the internal energy decreases by approximately 103,050.29 J.
(a) Internal Energy = [tex](\frac {3}{2}) \times n \times R \times T[/tex] where n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. Given that we have 3.85 moles of the gas and the temperature is 0°C, we need to convert the temperature to Kelvin by adding 273.15.
Internal Energy[tex]= (3/2) \times 3.85 \times 8.314 \times (0 + 273.15) J[/tex]
[tex]= 3.85 \times 12.471 \times 273.15 J= 126,296.46 J[/tex]
Therefore, the internal energy of the gas is approximately 126,296.46 J.
(b) To calculate the change in internal energy when the gas is heated to 485 K, we can subtract the initial internal energy from the final internal energy. Using the same formula as above, we calculate the final internal energy with the new temperature:
Final Internal Energy[tex]= (3/2) \times 3.85 \times 8.314 \times 485 J= 3.85 \times 12.471 \times 485 J = 23,246.17 J[/tex]
Change in Internal Energy = Final Internal Energy - Initial Internal Energy
= 23,246.17 J - 126,296.46 J = -103,050.29 J
The change in internal energy is approximately -103,050.29 J. The negative sign indicates a decrease in internal energy as the gas is heated.
Learn more about moles here:
https://brainly.com/question/29367909
#SPJ11
Constanta Part A An ideal gas expands at a constant total pressure of 2.5 atm from 500 ml to 650 ml Heat then flows out of the gas at constant volume, and the pressure and temperature are allowed to drop until the temperature reaches its original value. Calculate the total work done by the gas in the process Express your answer to two significant figures and include the appropriate units. ? Value Units Submit Previous Answers Request Answer Part An ideal gas expands at a constant total pressure of 2,5 atm from 500 ml to 650 ml Heat then flows out of the gas at constant volume, and the pressure and temperature are allowed to drop unti the temperature reaches its original value Calculate the total heat flow into the gas Express your answer to two significant figures and include the appropriate units, MA ? Value Units Submit Previous Answers Request Answer
To calculate the total work done by the gas, we need to use the formula
W = -PΔV
where W is work,
P is pressure, and ΔV is the change in volume.
Since pressure is constant, we can use the initial pressure value of 2.5 atm to calculate the work done.
W = -PΔV = -(2.5 atm) (0.65 L - 0.5 L) = -0.375 L-atm
We can express the answer to two significant figures as
W = -0.38 L-atm
To calculate the total heat flow into the gas, we need to use the first law of thermodynamics which states that
ΔU = Q + W
where ΔU is the change in internal energy, Q is the heat flow, and W is the work done.
Since the gas returns to its original temperature, we know that
ΔU = 0
which means that
Q = -W
Using the value of work done from Part A, we can calculate the heat flow as
Q = -W = 0.38 L-atm
We can express the answer to two significant figures as
Q = 0.38 L-atm.
To know more about calculate visit:
https://brainly.com/question/30781060
#SPJ11
6 A speedometer estimates linear speed based on angular speed of tires. If you switch to speed. larger tires, then the speedometer will read a lower linear speed than the true linear 7. Two spheres have the same mass and radius but one is hollow. If you roll both of them from the same height, the hollow one reaches to the ground later. 8. Two disks spin with the same angular momentum, but disk 1 has more Kinetic Energy than disk 2. Disk two has a larger moment of inertia. 9. You hold a spinning bicycle wheel while standing on a turntable. If you flip the wheel over, the turntable will move in the same direction. 10. If you used 5000 joules to throw a ball, it would travel faster if you threw in such a way that it is rotating
6. When switching to larger tires, the speedometer will display a lower linear speed than the true linear speed. This is because larger tires have a greater circumference, resulting in each revolution covering a longer distance compared to the original tire size.
The speedometer is calibrated based on the original tire size and assumes a certain distance per revolution. As a result, with larger tires, the speedometer underestimates the actual linear speed.
7. Two spheres with the same mass and radius are rolled from the same height. The hollow sphere reaches the ground later than the solid sphere. This is due to the hollow sphere having less mass and, consequently, less inertia. It requires less force to accelerate the hollow sphere compared to the solid sphere. As a result, the hollow sphere accelerates slower and takes more time to reach the ground.
8. Two disks with the same angular momentum are compared, but disk 1 has more kinetic energy than disk 2. Disk 2 has a larger moment of inertia, which is a measure of the resistance to rotational motion. The disk with greater kinetic energy has a higher velocity than the disk with lower kinetic energy. While both disks possess the same angular momentum, their different moments of inertia contribute to the difference in kinetic energy.
9. When a spinning bicycle wheel is flipped over while standing on a turntable, the turntable moves in the same direction. This phenomenon is explained by the conservation of angular momentum. Flipping the wheel changes its angular momentum, and to conserve angular momentum, the turntable moves in the opposite direction to compensate for the change.
10. If a ball is thrown with 5000 joules of energy and it is rotating, it will travel faster. The conservation of angular momentum states that when the net external torque acting on a system is zero, angular momentum is conserved. As the ball is thrown with spin, it possesses angular momentum that remains constant. The rotation of the ball does not affect its forward velocity, which is determined by the initial kinetic energy. However, the rotation influences the trajectory of the ball.
To learn more about speedometer, you can visit the following link:
brainly.com/question/32573142
#SPJ11
Two waves are given by the equations y1 = 3 sinπ(x + 4t) and y2 = 3 sinπ(x - 4t)
(a) Determine the equation of the standing wave formed by the superposition of these two waves.
(b) Determine the amplitude of the standing wave at t = 0
(c) Determine the wave number and the angular frequency of the standing wave
When two waves with the equations y1 = 3 sinπ(x + 4t) and y2 = 3 sinπ(x - 4t) superpose, a standing wave is formed. The wave number is π, and the angular frequency is 8π.
The equation, amplitude at t = 0, wave number, and angular frequency of the standing wave can be determined. The explanation of the answers will be provided in the second paragraph.
(a) To find the equation of the standing wave formed by the superposition of the two waves, we add the equations y1 and y2:
y = y1 + y2 = 3 sinπ(x + 4t) + 3 sinπ(x - 4t)
(b) To determine the amplitude of the standing wave at t = 0, we substitute t = 0 into the equation and evaluate:
y(t=0) = 3 sinπx + 3 sinπx = 6 sinπx
(c) The wave number (k) and angular frequency (ω) of the standing wave can be obtained by comparing the equation y = A sin(kx - ωt) with the equation of the standing wave obtained in part (a):
k = π, ω = 8π
In summary, the equation of the standing wave is y = 3 sinπx + 3 sinπx = 6 sinπx. The amplitude of the standing wave at t = 0 is 6. The wave number is π, and the angular frequency is 8π.
Learn more about waves here: brainly.com/question/25954805
#SPJ11
A uniform density sheet of metal is cut into the shape of an isosceles triangle, which is oriented with the base at the bottom and a corner at the top. It has a base B = 25 cm, height H = 18 cm, and area mass density σ.
Consider a horizontal slice of the triangle that is a distance y from the top of the triangle and has a thickness dy. Write an equation for the area of this slice in terms of the distance y, and the base B and height H of the triangle.
Set up an integral to calculate the vertical center of mass of the triangle, assuming it will have the form C ∫ f(y) where C has all the constants in it and f(y) is a function of y. What is f(y)?
Integrate to find an equation for the location of the center of mass in the vertical direction. Use the coordinate system specified in the previous parts, with the origin at the top and positive downward.
Find the numeric value for the distance between the top of the triangle and the center of mass in cm
a) The area of the horizontal slice of the triangle is given by:
dA = B(y/H)dy
where y/H gives the fraction of the height at which the slice is located, and dy represents its thickness.
b) To calculate the vertical center of mass of the triangle, we need to integrate the product of the area of each slice and its distance from the top of the triangle. Since the origin is at the top, the distance from the top to a slice located at a height y is simply y. Therefore, the integral for the vertical center of mass has the form:
C ∫ y dA
To simplify this expression, we can substitute the equation for dA from part (a):
C ∫ yB(y/H)dy
c) Integrating this expression, we get:
C ∫ yB(y/H)dy = C(B/H) ∫ y^2 dy
= C(B/H)(1/3) y^3 + K
where K is the constant of integration. Since the center of mass is located at the midpoint of the base, we know that its vertical coordinate is H/3. Therefore, we can solve for C and K using the following two equations:
C(B/H)(1/3) H^3 + K = H/3 (center of mass is at the midpoint of the base)
C(B/H)(1/3) 0^3 + K = 0 (center of mass is at the origin)
Solving for C and K, we get:
C = 4σ/(5BH)
K = -2H/15
Therefore, the equation for the location of the center of mass in the vertical direction is:
y_cm = (4/5)*(∫ yB(y/H)dy)/(BH) - 2/15
d) Substituting the equation for dA from part (a) into the integral for y_cm, we get:
y_cm = (4/5)*(1/BH) ∫ yB(y/H)dy - 2/15
= (4/5)*(1/BH) ∫ y^2 dy
= (4/5)*(1/BH)(1/3) H^3
= 0.32 H
Substituting the given values for B and H, we get:
y_cm = 0.32 * 18 cm = 5.76 cm
Therefore, the distance between the top of the triangle and the center of mass is approximately 5.76 cm.
To know more about mass visit :
brainly.com/question/1287565
#SPJ11
A current of 3.32 A flows in a wire. How many electrons are flowing past any point in the wire per second? The charge on one electron is 1.60x10-19 C. Submit Answer Tries 0/10
Given:Current I = 3.32 ACharge on electron q = 1.60 × 10⁻¹⁹ CWe need to find the number of electrons flowing past any point in the wire per second.
Here, we can use the formula for current as the rate of flow of charge:n = I / qWhere,n = number of electronsI = currentq = charge on electronSubstitute the given values in the formula, we getn = I / q= 3.32 A / 1.60 × 10⁻¹⁹ C≈ 2.075 × 10¹⁹ electrons/secSince the number of electrons flowing per second is greater than 100, the answer is "More than 100".Therefore, the number of electrons flowing past any point in the wire per second is "More than 100".
To know more about electron visit:
https://brainly.com/question/1255220
#SPJ11
A color television tube also generates some x rays when its electron beam strikes the screen. What is the shortest wavelength in m of these x rays, if a 24.7-KV potential is used to accelerate the electrons? (Note that TVs have shielding to prevent these x rays from exposing viewers.)
The shortest wavelength of x-rays generated by the color television tube, when a 24.7-kV potential is used to accelerate the electrons, is approximately 5.03 × 10⁻⁷ meters.
To find the shortest wavelength of x-rays generated by the television tube, we can use the equation that relates wavelength to the accelerating potential:
λ = hc / (eV)
where λ is the wavelength, h is the Planck's constant (6.626 × 10⁻³⁴ J·s), c is the speed of light (3.0 × 10⁸ m/s), e is the elementary charge (1.6 × 10⁻¹⁹ C), and V is the accelerating potential (24.7 kV = 24.7 × 10^3 V).
Plugging in the values, we have:
λ = (6.626 × 10⁻³⁴ J·s × 3.0 × 10⁸ m/s) / (1.6 × 10⁻¹⁹ C × 24.7 × 10³ V)
Simplifying the expression, we get:
λ = (1.988 × 10⁻²⁵) J·m) / (39.52 × 10⁻¹⁹ C·V)
Calculating further, we have:
λ = 5.03 × 10⁻⁷ m
To learn more about electron beam -
brainly.com/question/32727468
#SPJ11
"A 6.0-cm-tall object is 12 cm in front of a concave mirror that
has a 27 cm focal length.
A.) Calculate the image position.
B.) Calculate the image height. Type a positive value if the
image is upright
A. The image position formed from concave mirror is 18cm. B. The image height is 9 cm.
A. Calculation of image position: We know that the mirror formula is 1/f = 1/v + 1/u, where, f is the focal length of the mirror. Substituting the given values, we get:1/(-27) = 1/v + 1/(-12). v = -18 cm. Since the image is formed inside the mirror, the image position is negative.
B. Calculation of image height: Magnification produced by the mirror is given by the formula, m = v/u. on substituting the values we get, m = -18 / (-12) = 3/2.The image height can be calculated as, h' = m × h= (3/2) × 6.0= 9.0 cm.
The height of the image is positive, which means it is an upright image.
Let's learn more about focal length:
https://brainly.com/question/25779311
#SPJ11
Show that the gravitational force between two planets is quadrupled
if the masses of both planets are doubled but the distance between
them stays the same.
Newton's law of universal gravitation describes the force of gravity acting between two objects. This force is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. Mathematically, this law can be expressed as:
F ∝ (m₁m₂)/d²
where:
F is the force of gravity acting between two objects.
m₁ and m₂ are the masses of the two objects.
d is the distance between them.
Now, let's consider two planets A and B. Let their masses be m₁ and m₂ respectively, and let their distance apart be d. According to the law of gravitation:
F = G(m₁m₂)/d²
where G is the gravitational constant.
Now, if both planets are doubled in mass,
their masses become 2m₁ and 2m₂ respectively.
The distance between them remains the same, i.e., d.
Thus, the new force of gravity acting between them can be given as:
F' = G(2m₁ * 2m₂)/d²= 4G(m₁m₂)/d²= 4F
Given that the force of gravity between the planets is quadrupled when their masses are doubled while their distance remains the same.
Learn more about Newton's law:
https://brainly.com/question/25842103
#SPJ11
A 0.237-kg particle undergoes simple harmonic motion along the horizontal x-axis between the points x1 = -0.327 mand *2 = 0.479 m. The period of oscillation is 0.563 s. Find the frequency
The frequency of the oscillation of the particle is 3.14 Hz.
Mass of the particle, m = 0.237 kg
Period of oscillation, T = 0.563 s
Amplitude, A = (0.479 − (−0.327))/2= 0.103 m
Frequency of the particle is given by; f = 1/T
We know that for simple harmonic motion; f = (1/2π) × √(k/m)
Where k is the force constant and m is the mass of the particle
The angular frequency ω = 2πf
Hence,ω = 2π/T
Substitute the values, ω = 2π/0.563 rad/s
Thus, k = mω²= (0.237 kg) × (2π/0.563)²= 50.23 N/m
Now, f = (1/2π) × √(k/m)= (1/2π) × √[50.23 N/m/(0.237 kg)]= 3.14 Hz (approx)
Therefore, the frequency of the particle is 3.14 Hz.
Learn more about frequency of oscillation https://brainly.com/question/30694091
#SPJ11
A converging lens has a focal length of 20.0 cm. Locate the images for each of the following object distances. (Enter 'infinity' for the image distance if necessary.) For each case, state whether the image is real or virtual and upright or inverted. Find the magnification. (If there is no answer for a blank enter N/A.) (a) 40.0 cm cm --location of the image-- O real, inverted O virtual, inverted O no image formed O real, upright O virtual, upright X cm --location of the image-- O no image formed O real, inverted O real, upright O virtual, inverted O virtual, upright X cm --location of the image-- magnification (b) 20.0 cm magnification (c) 10.0 cm O inverted, real O inverted, virtual O erect, virtual O erect, real O no image formed
To locate the images for each object distance and determine their characteristics, we can use the lens formula, magnification formula, and sign conventions.
Given:
Focal length (f) = 20.0 cm
(a) Object distance = 40.0 cm
Using the lens formula:
1/f = 1/v - 1/u
where f is the focal length, v is the image distance, and u is the objectdistance.
Plugging in the values:
1/20 cm = 1/v - 1/40 cm
Simplifying:
1/v = 1/20 cm + 1/40 cm
1/v = (2 + 1) / (40 cm)
1/v = 3 / 40 cm
Taking the reciprocal:
v = 40 cm / 3
v ≈ 13.33 cm
The image distance is approximately 13.33 cm.
The magnification (m) is given by:
m = -v/u
Plugging in the values:
m = -(13.33 cm) / (40 cm)
m = -0.333
The negative sign indicates an inverted image.
Therefore, for an object distance of 40.0 cm, the location of the image is approximately 13.33 cm, the image is real and inverted, and the magnification is approximately -0.333.
(b) Object distance = 20.0 cm
Using the lens formula with u = 20.0 cm:
1/20 cm = 1/v - 1/20 cm
Simplifying:
1/v = 1/20 cm + 1/20 cm
1/v = (1 + 1) / (20 cm)
1/v = 2 / 20 cm
Taking the reciprocal:
v = 20 cm / 2
v = 10 cm
The image distance is 10.0 cm.
The magnification for an object at the focal length is undefined (m = infinity) according to the magnification formula. Therefore, the magnification is N/A.
The location of the image for an object distance of 20.0 cm is 10.0 cm. The image is real and inverted.
(c) Object distance = 10.0 cm
Using the lens formula with u = 10.0 cm:
1/20 cm = 1/v - 1/10 cm
Simplifying:
1/v = 1/20 cm + 2/20 cm
1/v = 3 / 20 cm
Taking the reciprocal:
v = 20 cm / 3
v ≈ 6.67 cm
The image distance is approximately 6.67 cm.
The magnification for an object distance less than the focal length (10.0 cm) is given by:
m = -v/u
Plugging in the values:
m = -(6.67 cm) / (10.0 cm)
m = -0.667
The negative sign indicates an inverted image.
Therefore, for an object distance of 10.0 cm, the location of the image is approximately 6.67 cm, the image is real and inverted, and the magnification is approximately -0.667.
To summarize:
(a) Object distance: 40.0 cm
Location of the image: 13.33 cm
Image characteristics: Real and inverted
Magnification: -0.333
(b) Object distance: 20.0 cm
Location of the image: 10.0 cm
Image characteristics: Real and inverted
Magnification: N/A
(c) Object distance: 10.0 cm
Location of the image: 6.67 cm
Image characteristics: Rea
Learn more about magnification here
brainly.com/question/28350378
#SPJ11
An alpha particle travels at a velocity of magnitude 440 m/s through a uniform magnetic field of magnitude 0.052 T. (An alpha particle has a charge of charge of +3.2 x 10-19 C and a mass 6.6 x 10-27 kg) The angle between the particle's direction of motion and the magnetic field is 52°. What is the magnitude of (a) the force acting on the particle due to the field, and (b) the acceleration of the particle due to this force? (c) Does the speed of the particle increase, decrease, or remain the same? (a) Number P. Units (b) Number i Units < (c)
A) The force acting on the particle due to the field is 3.22 × 10-14 N.B) The acceleration of the particle due to this force is 4.89 × 1014 m/s2.(C) The speed of the particle remains constant.
The given data are,Velocity of alpha particle, v = 440 m/s
Magnetic field, B = 0.052 TCharge of alpha particle,
q = +3.2 x 10-19 C
Angle between velocity of alpha particle and magnetic field, θ = 52°
Mass of alpha particle, m = 6.6 x 10-27 kg(a) The formula for the force acting on the particle due to the field is given by,F = qvBsinθSubstitute the given values of q, v, B and θ in the above formula to obtain the force acting on the particle due to the field.
F = 3.2 × 10-19 × 440 × 0.052 × sin 52°F = 3.22 × 10-14 N
Therefore, the force acting on the particle due to the field is 3.22 × 10-14 N.(b) The formula for the acceleration of the particle due to this force is given by,a = F / mSubstitute the values of F and m in the above formula to obtain the acceleration of the particle due to this force.
a = 3.22 × 10-14 / 6.6 × 10-27a
= 4.89 × 1014 m/s2
Therefore, the acceleration of the particle due to this force is 4.89 × 1014 m/s2.
(c) The formula for the speed of a charged particle moving in a magnetic field is given by
v = (2qB/m)½ × sin θ
The speed of the alpha particle is given by,
v = (2 × 3.2 × 10-19 × 0.052 / 6.6 × 10-27)½ × sin 52°v
= 440 m/s
Therefore, the speed of the particle remains constant.
learn more about magnetic field
https://brainly.com/question/14411049
#SPJ11
A quasar has a red shift of 3, what is the change in wavelength of a hydrogen alpha line? What is this velocity in terms of the speed of light? The laboratory wavelength of the Hydrogen alpha line is 486.1 nm.
The change in wavelength of the Hydrogen alpha line due to the redshift of 3 is 1458.3 nm, and the velocity associated with this redshift is 3 times the speed of light.
We are given a quasar with a redshift of 3 and the laboratory wavelength of the Hydrogen alpha line (486.1 nm). The objective is to determine the change in wavelength of the Hydrogen alpha line due to the redshift and calculate the velocity in terms of the speed of light.
To calculate the change in wavelength, we can use the formula Δλ/λ = z, where Δλ is the change in wavelength, λ is the laboratory wavelength, and z is the redshift. Substituting the given values, we have Δλ/486.1 = 3. Solving for Δλ, we find that the change in wavelength is 3 * 486.1 nm = 1458.3 nm.
Next, to determine the velocity in terms of the speed of light, we can use the formula v/c = z, where v is the velocity and c is the speed of light. Substituting the redshift value of 3, we have v/c = 3. Solving for v, we find that the velocity is 3 * c.
In conclusion, the change in wavelength of the Hydrogen alpha line due to the redshift of 3 is 1458.3 nm, and the velocity associated with this redshift is 3 times the speed of light.
Learn more about wavelength here: https://brainly.com/question/31322456
#SPJ11
: The position of a partide moving along the x axis is given in centimeters by-7.00+ 2.50e, where it is in seconds. Consider the time interval 2.00 tot-3.00 s (ndicate the direction with the sign of your answer.) (a) Calculate the average velocity. cm/s (b) Calculate the instantaneous velocity at t-2.00 s cm/s (c) Calculate the instantaneous velocity at t-3.00 s om/s (d) Calculate the instantaneous velocity at r-2.50 s cm/s (e) Calculate the instantaneous velocity when the particle is midway between its positions at -2.00 and 3.00 cm/s (f) Graph x versus t and indicate your answers graphically.
(a) The average velocity of the particle during the time interval from 2.00 to 3.00 seconds is -2.50 cm/s.
(b) The instantaneous velocity at t = 2.00 seconds is -2.50 cm/s.
(c) The instantaneous velocity at t = 3.00 seconds is -2.50 cm/s.
(d) The instantaneous velocity at t = 2.50 seconds is -2.50 cm/s.
(e) The instantaneous velocity when the particle is midway between its positions at -2.00 and 3.00 seconds is -2.50 cm/s.
(f) The graph of x versus t would show a linear relationship with a downward slope of -2.50 cm/s.
The given equation for the position of the particle along the x-axis is -7.00 + 2.50e, where t represents time in seconds. In this equation, the term -7.00 represents the initial position of the particle at t = 0 seconds, and 2.50e represents the displacement or change in position with respect to time.
(a) To calculate the average velocity, we need to find the total displacement of the particle during the given time interval and divide it by the duration of the interval.
In this case, the displacement is given by the difference between the positions at t = 3.00 seconds and t = 2.00 seconds, which is (2.50e) at t = 3.00 seconds minus (2.50e) at t = 2.00 seconds. Simplifying this expression, we get -2.50 cm/s as the average velocity.
(b) The instantaneous velocity at t = 2.00 seconds can be found by taking the derivative of the position equation with respect to time and evaluating it at t = 2.00 seconds. The derivative of -7.00 + 2.50e with respect to t is simply 2.50e. Substituting t = 2.00 seconds into this expression, we get -2.50 cm/s as the instantaneous velocity.
(c) Similarly, to find the instantaneous velocity at t = 3.00 seconds, we evaluate the derivative 2.50e at t = 3.00 seconds, which also gives us -2.50 cm/s.
(d) The instantaneous velocity at t = 2.50 seconds can be determined in the same way, by evaluating the derivative 2.50e at t = 2.50 seconds, resulting in -2.50 cm/s.
(e) When the particle is midway between its positions at -2.00 and 3.00 seconds, the time is 2.00 + (3.00 - 2.00)/2 = 2.50 seconds. Therefore, the instantaneous velocity at this time is also -2.50 cm/s.
(f) The graph of x versus t would be a straight line with a slope of 2.50 cm/s, indicating a constant velocity of -2.50 cm/s throughout the given time interval.
Learn more about Velocity
brainly.com/question/30559316
#SPJ11
A large mirror has a radius of curvature of 1 m What is the the power of the mirror? O a 0 251 Ob 21 c 0.25 m Od 2 m"
The power of the mirror with a radius of curvature of 1 m is 2 m (Option d).
The power of a mirror is given by the formula P = 2/R, where P represents the power and R represents the radius of curvature. In this case, the radius of curvature is 1 m, so the power of the mirror can be calculated as P = 2/1 = 2 m. Therefore, option d, 2 m, is the correct answer.
The power of a mirror determines its ability to converge or diverge light rays. A positive power indicates convergence, meaning the mirror focuses incoming parallel light rays, while a negative power indicates divergence, meaning the mirror spreads out incoming parallel light rays.
To learn more about power, click here:
brainly.com/question/12127760
#SPJ11
Consider that R-134-a will be used to fulfill the cooling of the bananas. The evaporator will work at 100 kPa with a superheat of 6.4 C and an efficiency of 80%. The compressor at a compression ratio of 9 with isentropic efficiency of 85%.
Determine
a) the rate of reinforced reinforcement b) the mass flow of R 134-a required ( 5 points)
c) exergy destruction in each basic component (12 points)
The rate of reinforced refrigeration would be -0.088 mass flow rate of R-134a kW , Where the negative sign indicates refrigeration.The mass flow of R 134-a required would be 11 g/s. Exergy destruction in evaporator would be 0.71 kW, in compressor would be 0.018 kW.
Given conditions:
R-134-a will be used to fulfill the cooling of the bananas.The evaporator will work at 100 kPa with a superheat of 6.4°C and an efficiency of 80%.The compressor will have a compression ratio of 9 with isentropic efficiency of 85%.
a) Rate of refrigeration
Refrigeration is the process of cooling a space or substance below the environmental temperature. The unit of refrigeration is ton of refrigeration (TR).1 TR = 211 kJ/minRate of refrigeration can be calculated as follows:
Rate of refrigeration = (mass flow rate of R-134a × enthalpy difference at evaporator) / 1000
Rate of refrigeration = (mass flow rate of R-134a × h2-h1) / 1000
Where
h1 = Enthalpy at the evaporator inlet
h2 = Enthalpy at the evaporator outlet
Enthalpy values can be obtained from the refrigerant table of R-134a.
From the refrigerant table of R-134a,
At evaporator inlet (saturation state):
P = 100 kPa, superheat = 6.4°C h1 = 286.7 kJ/kg
At evaporator outlet (saturated state):
P = 100 kPa
h2 = 198.6 kJ/kg
Rate of refrigeration = (mass flow rate of R-134a × (198.6 - 286.7)) / 1000
Rate of refrigeration = -0.088 mass flow rate of R-134a kW
Where the negative sign indicates refrigeration.
b) Mass flow rate of R-134a
The mass flow rate of R-134a can be obtained as follows:
Mass flow rate of R-134a = Rate of refrigeration / (enthalpy difference at compressor/ηC)
Mass flow rate of R-134a = Rate of refrigeration / (h3 - h4s / ηC)Where
ηC is the isentropic efficiency of the compressor
From the refrigerant table of R-134a,
At compressor inlet (saturated state):
P = 100 kPa
h3 = 198.6 kJ/kg
At compressor outlet (saturation state):
P = 900 kPa
h4s = 323.4 kJ/kgηC = 85%
Mass flow rate of R-134a = -0.088 / (323.4 - 198.6 × 0.85)
Mass flow rate of R-134a = 0.011 kg/s
Mass flow rate of R-134a = 11 g/s
Therefore, the mass flow rate of R-134a is 11 g/s.
c) Exergy destruction in each basic component
The formula for the exergy destruction in each basic component is given by the following equation:
Exergy destruction in evaporator = mR × (h2 - h1 - T0 × (s2 - s1))
Exergy destruction in compressor = mR × (h3s - h4 - T0 × (s3s - s4))
Where mR is the mass flow rate of R-134aT
0 is the temperature at the surroundings/sink
From the refrigerant table of R-134a,
At evaporator inlet (saturation state):
P = 100 kPa, superheat = 6.4°C
h1 = 286.7 kJ/kg
s1 = 1.0484 kJ/kg K
At evaporator outlet (saturated state):
P = 100 kPa
h2 = 198.6 kJ/kg
s2 = 0.8369 kJ/kg K
At compressor inlet (saturated state):
P = 100 kPa
h3 = 198.6 kJ/kg
s3 = 0.6689 kJ/kg K
At compressor outlet (saturation state):
P = 900 kPa
h4s = 323.4 kJ/kg
s4 = 1.5046 kJ/kg K
Exergy destruction in evaporator = 0.011 × (198.6 - 286.7 - 27 + 6.4 × (0.8369 - 1.0484))
Exergy destruction in evaporator = 0.71 kW
Exergy destruction in compressor = 0.011 × (198.6 - 323.4 + 27 - (0.85 × (198.6 - 323.4 + 27) + (1 - 0.85) × (0.6689 - 1.5046)))
Exergy destruction in compressor = 0.018 kW
Therefore, the exergy destruction in the evaporator is 0.71 kW and the exergy destruction in the compressor is 0.018 kW.
Learn more about Rate of refrigeration at https://brainly.com/question/30910617
#SPJ11
lution PL Problemet. At a pressure to rober, what fraction of Nitrogen travel for 192mm. melecules will or more Without having Collision ? Ans&-should be numarically Calculated.
At a given pressure, the fraction of nitrogen molecules that will travel a distance of 192 mm without experiencing a collision can be numerically calculated.
To determine the fraction of nitrogen molecules that will travel 192 mm without experiencing a collision, we need to consider the mean free path of the molecules. The mean free path is the average distance a molecule travels between collisions. It depends on the pressure and the molecular diameter.
First, we need to calculate the mean free path (λ) using the formula:
λ = (k * T) / (sqrt(2) * π * d^2 * P)
Where:
λ is the mean free path,
k is the Boltzmann constant (1.38 x 10^-23 J/K),
T is the temperature in Kelvin,
d is the diameter of the nitrogen molecule (approximately 0.38 nm), and
P is the pressure in Pascal.
Once we have the mean free path, we can calculate the fraction of molecules that will travel 192 mm without collision. The fraction can be determined using the formula:
Fraction = exp(-192 / λ)
Where exp() represents the exponential function.
By plugging in the appropriate values for temperature and pressure, and calculating the mean free path, we can then substitute it into the second formula to find the fraction of nitrogen molecules that will travel the given distance without experiencing a collision.
To learn more about pressure click here brainly.com/question/30673967
#SPJ11
(6. point) Q.1-Knowing that we have four types of molecular bonds: 1-Covalent bond. 2- Ionic bond. 3- Van der Waals bond. 4- Hydrogen bond. Select one of these bonds and answer the following questions: A-Write the definition of your selected bond. B- Give an example of a molecule bonded by your selected bond. C- Describe if your selected bond is weak or strong comparing with other types of bonds and the responsible intermolecular force.
The selected bond is a hydrogen bond. It is a type of intermolecular bond formed between a hydrogen atom and an electronegative atom (such as nitrogen, oxygen, or fluorine) in a different molecule.
A hydrogen bond occurs when a hydrogen atom, covalently bonded to an electronegative atom, is attracted to another electronegative atom in a separate molecule or in a different region of the same molecule. The hydrogen atom acts as a bridge between the two electronegative atoms, creating a bond.
For example, in water (H₂O), hydrogen bonds form between the hydrogen atoms of one water molecule and the oxygen atom of neighboring water molecules. The hydrogen bond in water contributes to its unique properties, such as high boiling point and surface tension.
Hydrogen bonds are relatively weaker compared to covalent and ionic bonds. The strength of a bond depends on the magnitude of the electrostatic attraction between the hydrogen atom and the electronegative atom it interacts with. While hydrogen bonds are weaker than covalent and ionic bonds, they are stronger than van der Waals bonds.
The intermolecular force responsible for hydrogen bonding is the electrostatic attraction between the positively charged hydrogen atom and the negatively charged atom it is bonded to. This dipole-dipole interaction leads to the formation of hydrogen bonds. Overall, hydrogen bonds play a crucial role in various biological processes, including protein folding, DNA structure, and the properties of water.
To know more about electronegative atom refer here:
https://brainly.com/question/14367194#
#SPJ11
"The radius of curvature of spherical mirror is 20.0 cm. If a
real object of height 3.0 cm is located 12.0 cm to the left of the
reflective surface of the mirror, what will the magnification of
the image will be?
The magnification of the image is calculated to be 0.45.
The lens magnification is the difference between the height of the image and the height of the object. It can also be expressed as an image distance and an object distance.
The magnification is equal to the difference between the image distance and the object distance.
The radius of curvature of a spherical mirror, R = 20 cm,
Focal length of spherical mirror, f = R / 2 = 10 cm,
Object's height, h = 3 cm,
Object's distance, u = - 12 cm,
Using mirror formula, 1 / f = 1 / v + 1 / u
1 / v = 1 / f - 1 / u
1 / v = ( 1 / 10 ) + ( 1 / 12 )
v = 10 x 12 / 22
v = 5.45 cm
Magnification of the image, m = - v / u
m = - ( 5.45 cm ) / ( - 12 cm )
m = 0.45
So the magnification of the image is 0.45.
To learn more about magnification, refer to the link:
https://brainly.com/question/28350378
#SPJ4
Common static electricity involves charges ranging from nanocoulombs to microcoulombs. (a) How many electrons are needed to form a charge of –3.90 nC? (b) How many electrons must be removed from a neutral object to leave a net charge of 0.490 PC?
(a) Approximately 2.434 x 10^16 electrons are needed to form a charge of -3.90 nC.
To calculate the number of electrons required, we divide the total charge (-3.90 nC) by the charge of a single electron. The charge of a single electron is approximately -1.602 x 10^(-19) C. Dividing the total charge by the charge of a single electron gives us the number of electrons needed.
(b) Approximately 3.055 x 10^19 electrons must be removed from a neutral object to leave a net charge of 0.490 PC.
To determine the number of electrons to be removed, we divide the total charge (0.490 PC) by the charge of a single electron (-1.602 x 10^(-19) C). Since the net charge is positive, we use the magnitude of the charge. Dividing the total charge by the charge of a single electron gives us the number of electrons to be removed.
These calculations provide an estimation of the number of electrons required to form a specific charge or the number of electrons to be removed to achieve a particular net charge.
To learn more about charge , click here : https://brainly.com/question/13871705
#SPJ11
QUESTION 4 4. Your starting position is 57'S, 156°E. After moving 14 to the north and 70° to the east, what are your new geographical coordinates?
After moving 14 units to the north and 70° to the east from the starting position 57'S, 156°E, the new geographical coordinates are 43'S, 226°E. To determine the new geographical coordinates, we need to consider the movements in both latitude and longitude directions.
Latitude: Starting from 57'S, we move 14 units to the north. Since 1 degree of latitude corresponds to approximately 111 km, moving 14 units north is equivalent to 14 * 111 km = 1,554 km. As we are moving north, the latitude value decreases. Therefore, the new latitude coordinate is 57'S - 1,554 km, which is 43'S.
Longitude: Moving 70° to the east from 156°E, we add 70° to the initial longitude. As each degree of longitude corresponds to approximately 111 km at the equator, moving 70° to the east corresponds to 70 * 111 km = 7,770 km. Since we are moving to the east, the longitude value increases. Therefore, the new longitude coordinate is 156°E + 7,770 km. However, it's important to note that the distance covered in longitude depends on the latitude. At higher latitudes, the distance covered per degree of longitude decreases. In this case, without additional information about the location's latitude, we assume a constant conversion factor of 111 km per degree.
Thus, combining the new latitude and longitude coordinates, we have 43'S, 226°E as the new geographical coordinates after moving 14 units to the north and 70° to the east from the starting position 57'S, 156°E.
Learn more about distance here:
https://brainly.com/question/30510042
#SPJ11
Three 10-12 resistors are connected in parallel. What is their equivalent resistance?"
The equivalent resistance of the three 10^12 ohm resistors connected in parallel is approximately 3.33 x 10^11 ohms.
The formula for calculating the equivalent resistance (R_eq) of resistors connected in parallel is given by:
[tex]\frac{1}{R_{\text{eq}}} = \frac{1}{R_1} + \frac{1}{R_2} + \frac{1}{R_3} + \ldots[/tex]
In this case, we have three resistors connected in parallel, each with a resistance of 10^12 ohms. Substituting the values into the formula, we can calculate the equivalent resistance:
[tex]\frac{1}{R_{\text{eq}}} = \frac{1}{10^{12}} + \frac{1}{10^{12}} + \frac{1}{10^{12}}[/tex]
Simplifying the equation, we get:
[tex]\frac{1}{R_{\text{eq}}} = \frac{3}{10^{12}}[/tex]
Taking the reciprocal of both sides, we find:
[tex]R_{\text{eq}} = \frac{10^{12}}{3}[/tex]
Thus, The equivalent resistance (R_eq) of three 10^12 ohm resistors connected in parallel is approximately 3.33 x 10^11 ohms.
To know more about Equivalent resistance here: https://brainly.com/question/29635283
#SPJ11
(b) An object of height 10 mm is located 50 mm from a lens along its optic axis. The focal length of the lens is 20 mm. Assuming the lens can be treated as a thin lens (.e. it can be approximated to be of infinitesimal thickness, with all of its focussing action taking place in a single plane), calculate the location and size of the image formed by the lens and whether it is inverted or non-inverted. Include an explanation of all the steps in your calculation. (14 marks)
In this scenario, a lens with a focal length of 20 mm is used to form an image of an object located 50 mm away from the lens along its optic axis. The object has a height of 10 mm. By applying the thin lens formula and magnification formula, we can calculate the location and size of the image formed. The image is inverted and located 100 mm away from the lens, with a height of -5 mm.
To determine the location and size of the image formed by the lens, we can use the thin lens formula:
1/f = 1/v - 1/u,
where f represents the focal length of the lens, v is the image distance from the lens, and u is the object distance from the lens. Plugging in the values, we have:
1/20 = 1/v - 1/50.
Solving this equation gives us v = 100 mm. The positive value indicates that the image is formed on the opposite side of the lens (real image).
Next, we can calculate the size of the image using the magnification formula:
m = -v/u,
where m represents the magnification. Plugging in the values, we get:
m = -100/50 = -2.
The negative sign indicates an inverted image. The magnification value of -2 tells us that the image is two times smaller than the object.
Finally, to calculate the height of the image, we multiply the magnification by the object height:
h_image = m * h_object = -2 * 10 mm = -20 mm.
The negative sign indicates that the image is inverted, and the height of the image is 20 mm.
Therefore, the image formed by the lens is inverted, located 100 mm away from the lens, and has a height of -20 mm.
Learn more about height here :
brainly.com/question/29131380
#SPJ11
A circular loop of radius r=0.25e^(-3t) is placed in the presence of a magnetic field B=0.5T. In what time will it have a fifth of its initial voltage and how much will that voltage be?
The time taken for the circular loop to have one fifth of its initial voltage is 1.609 seconds and the voltage after that time is 0.1884e^(-6t) V.
Given that,
Radius of the circular loop,
r = 0.25e^(-3t)Magnetic field,
B = 0.5TInitial Voltage,
V₀ = ?Final Voltage,
V = V₀/5Time taken,
t = ?
Formula used: The voltage induced in a coil is given by the formula,
V = -N(dΦ/dt)
where,N = number of turns in the coil,
Φ = magnetic fluxInitial magnetic flux,
Φ₀ = πr²BFinal magnetic flux,
Φ = Φ₀/5
Time taken, t = ?
Solution:
Given, R = 0.25e^(-3t)B = 0.5TΦ₀ = πr²B= π(0.25e^(-3t))²(0.5)= π(0.0625e^(-6t))(0.5)= 0.0314e^(-6t)
Hence, V₀ = -N(dΦ/dt)
For the above formula, we need to find the value of dΦ/dt.
Using derivative,
dΦ/dt = d/dt (0.0314e^(-6t))= -0.1884e^(-6t)V = -N(dΦ/dt)= -1( -0.1884e^(-6t))= 0.1884e^(-6t)
Voltage after time t, V = V₀/5
Voltage after time t, 0.1884e^(-6t) = V₀/5V₀ = 0.942e^(-6t)
Time taken to have one fifth of initial voltage is t, So, 0.942e^(-6t)/5 = 0.1884e^(-6t)
On solving the above equation, we get, Time taken, t = 1.609seconds
Therefore, The time taken for the circular loop to have one fifth of its initial voltage is 1.609 seconds and the voltage after that time is 0.1884e^(-6t) V.
To know more about voltage, visit-
https://brainly.com/question/32002804
#SPJ11
The equation EMF = 0.09375πe^(-6t) at the calculated time to find the corresponding voltage.
To determine the time at which the circular loop will have a fifth of its initial voltage, we need to consider Faraday's law of electromagnetic induction, which states that the induced voltage (EMF) in a closed loop is equal to the negative rate of change of magnetic flux through the loop.
The induced voltage (EMF) is given by the equation:
EMF = -dΦ/dt
where dΦ/dt represents the rate of change of magnetic flux.
Given:
Radius of the circular loop, r = 0.25e^(-3t)
Magnetic field, B = 0.5 T
The magnetic flux Φ through the circular loop is given by the equation:
Φ = B * A
where A is the area of the circular loop.
The area of the circular loop is given by the equation:
A = π * r^2
Substituting the expression for r:
A = π * (0.25e^(-3t))^2
Simplifying:
A = π * 0.0625 * e^(-6t)
Now, we can express the induced voltage (EMF) in terms of the rate of change of magnetic flux:
EMF = -dΦ/dt = -d(B * A)/dt
Taking the derivative with respect to time:
EMF = -d(B * A)/dt = -B * dA/dt
Now, let's find dA/dt:
dA/dt = π * (-0.1875e^(-6t))
Substituting the given value of B = 0.5 T:
EMF = -B * dA/dt = -0.5 * π * (-0.1875e^(-6t))
Simplifying:
EMF = 0.09375πe^(-6t)
To find the time at which the voltage is a fifth of its initial value, we set EMF equal to 1/5 of its initial value (EMF_initial):
0.09375πe^(-6t) = (1/5) * EMF_initial
Solving for t:
e^(-6t) = (1/5) * EMF_initial / (0.09375π)
Taking the natural logarithm of both sides:
-6t = ln[(1/5) * EMF_initial / (0.09375π)]
Solving for t:
t = -ln[(1/5) * EMF_initial / (0.09375π)] / 6
This equation will give you the time at which the circular loop will have a fifth of its initial voltage. To find the value of that voltage, you need to know the initial EMF value. Once you have the initial EMF value, you can substitute it into the equation EMF = 0.09375πe^(-6t) at the calculated time to find the corresponding voltage.
To know more about Faraday's law, visit:
https://brainly.com/question/1640558
#SPJ11