To find the magnitude of the magnetic field B, we can equate the magnetic force on the wire to its weight and solve for B. The weight of the wire can be calculated using its length, diameter, and density.
The magnetic force on the wire is given by the equation:F = B * I * Lwhere F is the magnetic force, B is the magnetic field, I is the current, and L is the length of the wire.
The weight of the wire can be calculated using its volume, density, and gravitational acceleration:
Weight = Volume * Density * g
where Volume is the cross-sectional area of the wire multiplied by its length.
Given:
Length of the wire (l) = 8 m
Diameter of the wire (d) = 4 mm = 0.004 m
Current through the wire (I) = 3.5 A
Density of copper (ρ) = 9000 kg/m^3
Acceleration due to gravity (g) = 9.8 m/s^2
First, let's calculate the weight of the wire:
Volume = π * (0.004/2)^2 * 8
Volume = 3.142 * (0.002)^2 * 8
Volume = 6.35 x 10^(-6) m^3
Mass = Volume * Density
Mass = 6.35 x 10^(-6) * 9000
Mass = 0.05715 kg
Weight = Mass * Gravity
Weight = 0.05715 * 9.8
Weight = 0.55967 N
Now, we can equate the magnetic force on the wire to its weight:
Magnetic Force = B * I * Length
0.55967 = B * 3.5 * 8
0.55967 = 28BB = 0.55967 / 28
B = 0.01999 T
Therefore, the magnitude of the magnetic field B is approximately 0.01999 Tesla.
To learn more about magnetic field click here.
brainly.com/question/14848188
#SPJ11
Q|C A Carnot heat engine operates between temperatures Th and Tc . (d) Does the answer to part (c) depend on Tc ? Explain.
Yes, the answer to part (c) does depend on Tc. In a Carnot heat engine, the efficiency of the engine is given by the equation: Efficiency = 1 - (Tc / Th).
Where Tc is the temperature of the cold reservoir and Th is the temperature of the hot reservoir. The efficiency of the engine is directly affected by the temperature of the cold reservoir.
As Tc increases, the efficiency of the engine decreases. Therefore, the answer to part (c) does depend on Tc. The efficiency of the engine is directly affected by the temperature of the cold reservoir.
To know more about Carnot visit :
https://brainly.com/question/14680478
#SPJ11
Consider a car driving on a dry concrete road as it goes around a banked curve (ie, the road is tilted to help drivers navigate the turn). Which of the following are contributing to the centripetal ac
The correct answer is "Only (i) and (iv) contribute to the centripetal acceleration of the car."
Centripetal acceleration is the acceleration directed towards the center of the circular path. In the case of a car driving on a banked curve, there are certain forces at play.
(i) The vertical component of the normal force of the road on the car contributes to the centripetal acceleration. It is responsible for providing the necessary inward force to keep the car on the curved path.
(ii) The horizontal component of the normal force does not contribute to the centripetal acceleration. It acts perpendicular to the direction of motion and does not affect the car's circular motion.
(iii) The vertical component of the force of friction between the road and the tires of the car also does not contribute to the centripetal acceleration. It acts against the gravitational force but does not play a role in changing the car's direction.
(iv) However, the horizontal component of the force of friction between the road and the tires of the car does contribute to the centripetal acceleration. It acts towards the center of the curve and provides the necessary inward force for the circular motion.
Hence, only (i) and (iv) contribute to the centripetal acceleration of the car as it goes around the banked curve.
Learn more about centripetal here: brainly.com/question/20905151
#SPJ11
COMPLETE QUESTION
Consider a car driving on a dry concrete road as it goes around a banked curve (ie, the road is tilted to help drivers navigate the turn). Which of the following are contributing to the centripetal acceleration of the car as it goes around the banked curve? (The vertical component of the normal force of the road on the car. (11) The horizontal component of the normal force of the road on the car (II) The vertical component of the force of friction between the road and the tires of the car. (iv) The horizontal component of the force of friction between the road and the tires of the car Select the correct answer O Only (l) and (iv) contribute to the centripetal acceleration of the car. Only (iv) contribute to the centripetal acceleration of the car. o Only () contributes to the centripetal acceleration of the car. O All four contribute to the centripetal acceleration of the car. o Only (1) contributes to the centripetal acceleration of the car. Only (1) and (iii) contribute to the centripetal acceleration of the car.
A computer uses 3. 5A at 110V what is the resistance and ohms
To calculate the resistance of the computer, we can use Ohm's law:
V = IR
where V is the voltage, I is the current, and R is the resistance.
In this case, the voltage is 110V and the current is 3.5A. Substituting these values into the equation gives:
110V = 3.5A * R
Solving for R, we get:
R = 110V / 3.5A
R ≈ 31.43 Ω
Therefore, the resistance of the computer is approximately 31.43 ohms (Ω).
To know more about resistance, click on the link below:
brainly.com/question/17010736
#SPJ11
An emf is induced in a wire by changing the current in a nearby wire.
True
False
The statement "An emf is induced in a wire by changing the current in a nearby wire" is true.
The phenomenon of electromagnetic induction states that a change in magnetic field can induce an electromotive force (emf) or voltage in a nearby conductor, such as a wire.
This principle is described by Faraday's law of electromagnetic induction and is the basis for many electrical devices and technologies. According to Faraday's law of electromagnetic induction, a change in magnetic field can generate an electric current or induce an electromotive force (emf) in a nearby conductor.
This change in magnetic field can be produced by various means, including changing the current in a nearby wire. When the current in the nearby wire is altered, it creates a magnetic field that interacts with the magnetic field surrounding the other wire, inducing an emf.
This phenomenon is the underlying principle behind many electrical devices, such as transformers, generators, and electric motors. It allows for the conversion of mechanical energy to electrical energy or vice versa.
The induced emf can cause a current to flow in the wire if there is a complete circuit, enabling the transfer of electrical energy. Therefore, it is correct to say that an emf is induced in a wire by changing the current in a nearby wire, as this process follows the principles of electromagnetic induction.
Learn more about current here; brainly.com/question/9682654
#SPJ11
A 120 v pontential difference sends a current of 0. 83 a though a light bulb what is the resistance of the bulb
The resistance of the light bulb can be determined using Ohm's Law, which states that the resistance (R) is equal to the ratio of the potential difference (V) across the bulb to the current (I) passing through it:
R = V / I
Given:
Potential difference (V) = 120 V
Current (I) = 0.83 A
Substituting these values into the formula:
R = 120 V / 0.83 A
R ≈ 144.58 Ω (rounded to two decimal places)
Therefore, the resistance of the light bulb is approximately 144.58 Ω.
To know more about resistance, click on the link below:
brainly.com/question/17010736
#SPJ11
Question 43 1 pts An aluminum calorimeter of mass 52 g, has 172 g water, both at a temperature of 20.9°C. A 159-g piece of Copper originally kept in boiling water (T= 100°C) is transferred to the calorimeter. Calculate the final equilibrium temperature of the mixture in °C. Specific Heats: Al = 900 J/kg, water =4186 J/g, Cu = 387 J/kg.
The final equilibrium temperature of the mixture is approximately 22.8°C when the copper piece is transferred to the aluminum calorimeter containing water.
To determine the final equilibrium temperature of the mixture, we can use the principle of energy conservation. The heat gained by the cooler objects (water and aluminum calorimeter) should be equal to the heat lost by the hotter object (copper piece).
First, let's calculate the heat gained by the water and calorimeter. The specific heat capacity of water is 4186 J/kg°C, and the mass of water is 172 g. The specific heat capacity of aluminum is 900 J/kg°C, and the mass of the calorimeter is 52 g. The initial temperature of both the water and calorimeter is 20.9°C. We can calculate the heat gained as follows:
Heat gained by water and calorimeter = (mass of water × specific heat capacity of water + mass of calorimeter × specific heat capacity of aluminum) × (final temperature - initial temperature)
Next, let's calculate the heat lost by the copper piece. The specific heat capacity of copper is 387 J/kg°C. The mass of the copper piece is 159 g, and its initial temperature is 100°C. We can calculate the heat lost as follows:
Heat lost by copper = mass of copper × specific heat capacity of copper × (initial temperature - final temperature)
Since the heat gained and heat lost should be equal, we can set up the following equation:
(mass of water × specific heat capacity of water + mass of calorimeter × specific heat capacity of aluminum) × (final temperature - initial temperature) = mass of copper × specific heat capacity of copper × (initial temperature - final temperature)
By solving this equation, we can find the final equilibrium temperature of the mixture. After performing the calculations, we find that the final equilibrium temperature is approximately 22.8°C.
Learn more about equilibrium temperature
brainly.com/question/31961430
#SPJ11
a 0.6 kg drawbar A hanging from a 2.8 kg spool G with a radius of gyration of kg = 33.6 mm and a diameter d = 28 mm. how fast is the drawbar falling when it has descended 0.5 m?
The drawbar falls at a speed of approximately 2.70 m/s when it has descended 0.5 m.
To find the speed at which the drawbar is falling, we need to consider the conservation of energy. Initially, the drawbar has potential energy due to its height, and as it falls, this potential energy is converted into kinetic energy.
The potential energy (PE) of the drawbar at a height h is given by:
PE = mgh,
where:
m = mass of the drawbar (0.6 kg),g = acceleration due to gravity (9.8 m/s²),h = height of descent (0.5 m).The kinetic energy (KE) of the drawbar is given by:
KE = (1/2)mv²,
where:
m = mass of the drawbar (0.6 kg),v = speed of the drawbar.By equating the initial potential energy to the final kinetic energy, we can solve for the speed of the drawbar.
mgh = (1/2)mv².
Simplifying the equation, we get:
v = √(2gh).
Now, we need to determine the height h using the information given about the spool. The radius of gyration [tex]k_{G}[/tex] is related to the diameter d as follows:
[tex]k_{G}[/tex] = d/2.
Given the diameter d = 28 mm, we can calculate the radius of gyration [tex]k_{G}[/tex] as:
[tex]k_{G}[/tex] = 28 mm / 2 = 14 mm = 0.014 m.
The height h can be determined by subtracting the radius of gyration from the descent distance:
h = 0.5 m - 0.014 m = 0.486 m.
Now we can calculate the speed v using the derived height h:
v = √(2 * g * h)
= √(2 * 9.8 m/s² * 0.486 m)
≈ 2.70 m/s.
Therefore, when the drawbar has descended 0.5 m, it is falling at a speed of approximately 2.70 m/s.
The complete question should be:
A 0.6 kg drawbar A hanging from a 2.8 kg spool G with a radius of gyration of k[tex]_{G}[/tex] = 33.6 mm and a diameter d = 28 mm. How fast is the drawbar falling when it has descended 0.5 m?
The drawbar falls at ________ m/s.
To learn more about conservation of energy, Visit:
https://brainly.com/question/166559
#SPJ11
Steve builds a bicycle with big wheels to ride around. When its done, he measures the mass of the bike to be 63.2-kg with no one sitting on it. He measures the distance between the wheels and finds the distance between the center of the front and rear tires to be 4.30 m. He places a scale under each tire and calculates the center of mass is at a point 1.28 m behind the center of the front tire. What do the scales under each tire read? front wheel ___N rear wheel___ N
The scale under the front wheel reads 392.8 N, and the scale under the rear wheel reads 647.2 N.
To determine the readings on the scales under each tire, we need to consider the distribution of weight and the location of the center of mass. The total weight of the bicycle is 63.2 kg.
Given that the center of mass is located 1.28 m behind the center of the front tire, we can assume that the weight is evenly distributed between the front and rear tires. This means that the weight on each tire is half of the total weight.
To calculate the scale readings, we can use the principle of equilibrium. The sum of the forces acting on the bicycle must be zero. Since there are only two scales, the vertical forces exerted by the scales must balance the weight on the tires.
The scale under the front wheel will read half of the total weight, which is (63.2 kg / 2) * 9.8 m/s^2 = 311.6 N. The scale under the rear wheel will also read half of the total weight, which is (63.2 kg / 2) * 9.8 m/s^2 = 514.8 N.
Therefore, the scale under the front wheel reads 311.6 N, and the scale under the rear wheel reads 514.8 N.
Learn more about scale
brainly.com/question/32457165
#SPJ11
Suppose you have a 135-kg wooden crate resting on a wood floor. The coefficients of static and kinetic friction here are x1=0.5 and x=0.3. Randomized Variables m=135 kg 50% Part (1) What maximum force, in newtons, can you exert horizontally on the crate without moving it? 50% Part (b) If you continue to exert this force once the crate starts to slip, what will its acceleration be, in meters per square second
The maximum force that can be exerted horizontally on the crate without moving it is 735 N. The acceleration of the crate once it starts to slip is 3.07 m/s².
The maximum force that can be exerted horizontally on the crate without moving it is equal to the maximum static friction force. The maximum static friction force is equal to the coefficient of static friction times the normal force. The normal force is equal to the weight of the crate.
F_max = μ_s N = μ_s mg
Where:
F_max is the maximum force
μ_s is the coefficient of static friction
N is the normal force
m is the mass of the crate
g is the acceleration due to gravity
Plugging in the values, we get:
F_max = 0.5 * 135 kg * 9.8 m/s² = 735 N
Therefore, the maximum force that can be exerted horizontally on the crate without moving it is 735 N.
(b)Once the crate starts to slip, the friction force will be equal to the coefficient of kinetic friction times the normal force. The normal force is still equal to the weight of the crate.
F_k = μ_k N = μ_k mg
Where:
F_k is the kinetic friction force
μ_k is the coefficient of kinetic friction
N is the normal force
m is the mass of the crate
g is the acceleration due to gravity
Plugging in the values, we get:
F_k = 0.3 * 135 kg * 9.8 m/s² = 414 N
The acceleration of the crate is equal to the net force divided by the mass of the crate.
a = F_k / m
Where:
a is the acceleration of the crate
F_k is the kinetic friction force
m is the mass of the crate
Plugging in the values, we get:
a = 414 N / 135 kg = 3.07 m/s²
Therefore, the acceleration of the crate once it starts to slip is 3.07 m/s².
To learn more about static friction click here; brainly.com/question/28356847
#SPJ11
A system receives energy of 150 J by heat from surrounding and performs work of 60 J. Find the change in its internal energy. 120J 150 J 90 J 60 J
The change in internal energy of the system is 90 J. The correct option is - 90 J.
To find the change in internal energy, we can use the first law of thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system.
Heat added to the system = 150 J
Work done by the system = 60 J
Change in internal energy = Heat added - Work done
Change in internal energy = 150 J - 60 J
Change in internal energy = 90 J
Therefore, the change in the internal energy of the system is 90 J.
So, the correct option is 90 J.
Learn more about internal energy here:
https://brainly.com/question/25748529
#SPJ11
1. The human eye detects (b) a) longitudinal waves b) transverse waves 2. The type of lens used to correct for being nearsighted. (a) a) concave lens b) convex lens 3. The primary colors of light are 4. Briefly explain why the sky appears blue during the day. 5. Matching: Place the following scientists - Newton, Young, Einstein, Maxwell, Huygens a) particle theory for light b) wave theory of light
The human eye detects transverse waves, The type of lens used to correct for being nearsighted concave lens, The primary colours of light are blue, green and red.
Briefly explain why the sky appears blue during the day: At sunset, the sky often turns a warm orange or red hue because of the way that the atmosphere scatters sunlight. The blue colour of the sky is due to Rayleigh's scattering. As white light hits the Earth's atmosphere, blue light scatters more easily than red light due to its shorter wavelength. As a result, the blue light is scattered in all directions and makes the sky appear blue.
Matching: Particle theory of light- Newton, Wave theory of light- Young and Huygens
The human eye detects transverse waves. A concave lens is used to correct for being nearsighted. The primary colours of light are blue, green and red. The blue colour of the sky is due to Rayleigh's scattering. The particle theory of light was proposed by Newton while the wave theory of light was proposed by Young and Huygens.
To know more about Rayleigh's scattering visit
brainly.com/question/30694232
#SPJ11
2. An electron is xeleased from rest at a distance of 9.00 cm from a proton. If the proton is held in place, how fast will the electron be moving when it is 300 cm from the proton? (me = 9.11 X 103 kg, q= 1.6810-196)
The electron's speed can be determined using conservation of energy principles.
Initially, at a distance of 9.00 cm, the electron possesses zero kinetic energy and potential energy given by -U = kqQ/r.
At a distance of 300 cm, the electron has both kinetic energy (1/2)mv² and potential energy -U = kqQ/r. The total energy of the system, the sum of kinetic and potential energy, remains constant. Thus, applying conservation of energy, we can solve for the electron's speed.
Calculating the values using the given data:
Electron mass (me) = 9.11 x 10³ kg
Electron charge (q) = 1.68 x 10⁻¹⁹ C
Coulomb constant (k) = 9 x 10⁹ Nm²/C²
Proton charge (Q) = q = 1.68 x 10⁻¹⁹ C
Initial distance (r) = 9.00 cm = 0.0900 m
Final distance (r') = 300 cm = 3.00 m
Potential energy (U) = kqQ/r = 2.44 x 10⁻¹⁶ J
Using the equation (1/2)mv² - kqQ/r = -U, we find that v = √(3.08 x 10¹¹ m²/s²) = 5.55 x 10⁵ m/s.
Hence, the electron's speed at any point in its trajectory is 5.55 x 10⁵ m/s.
To learn more about the principles of conservation of energy and related topics, click this link:
brainly.com/question/16974883
#SPJ11
In solving problems in which two objects are joined by rope, what assumptions do we make about the mass of the rope and the forces the rope exerts on each end?
When two objects are connected by a rope, it is assumed that the mass of the rope is negligible compared to the mass of the objects, and that the forces the rope exerts on each end are equal and opposite.
When solving problems where two objects are connected by a rope, it is assumed that the mass of the rope is negligible compared to the mass of the objects, and that the forces the rope exerts on each end are equal and opposite. This is known as the assumption of massless, frictionless ropes.
In other words, the rope's mass is usually assumed to be zero because the mass of the rope is very less compared to the mass of the two objects that are connected by the rope. It is also assumed that the rope is frictionless, which means that no friction acts between the rope and the objects connected by the rope. Furthermore, it is assumed that the tension in the rope is constant throughout the rope. The forces that the rope exerts on each end of the object are equal in magnitude but opposite in direction, which is the reason why they balance each other.
Learn more about mass https://brainly.com/question/86444
#SPJ11
D Question 31 20 pts Identical charges q- +5.00 u C are placed at opposite corners of a square that has sides of length 8.00 cm. Point A is at one of the empty corners, and point B is at the center of the square. A charge qo -3.00 u C of mass 5 10 kg is placed at point A and moves along the diagonal of the square to point B. a. What is the electric potential at point A due to q: and q₂? [Select] b. What is the electric potential at point B due to as and q? [Select] c. How much work does the electric force do on go during its motion from A to B? [Select] d. If qo starts from rest and moves in a straight line from A to B, what is its speed at point B? [Select]
The formula for work done by the electric force is given by,W = qΔVwhere W is the work done by the electric force, q is the charge, and ΔV is the potential difference between the initial and final positions of the charge.
a. To calculate the electric potential at point A due to charges q₁ and q₂, we can use the formula for electric potential:
V = k * (q₁ / r₁) + k * (q₂ / r₂)
where V is the electric potential, k is the Coulomb constant (9 x 10⁹ N m²/C²), q₁ and q₂ are the charges, and r₁ and r₂ are the distances between the charges and point A, respectively.
Since the charges q₁ and q₂ are located at opposite corners of the square, the distances r₁ and r₂ are equal to the length of the square's side, which is 8.00 cm or 0.08 m.
Plugging in the values, we get:
V = (9 x 10⁹ N m²/C²) * (5.00 x 10⁻⁶ C / 0.08 m) + (9 x 10⁹ N m²/C²) * (5.00 x 10⁻⁶ C / 0.08 m)
Simplifying the expression, we find that the electric potential at point A due to q₁ and q₂ is 1.125 x 10⁶ V.
b. To calculate the electric potential at point B due to charges q₁ and q₂, we use the same formula as in part a, but substitute the distances r₁ and r₂ with the distance between point B and the charges. Since point B is at the center of the square, the distance from the center to any charge is half the length of the square's side, which is 0.04 m.
Plugging in the values, we get:
V = (9 x 10⁹ N m²/C²) * (5.00 x 10⁻⁶ C / 0.04 m) + (9 x 10⁹ N m²/C²) * (5.00 x 10⁻⁶ C / 0.04 m)
Simplifying the expression, we find that the electric potential at point B due to q₁ and q₂ is 2.25 x 10⁶ V.
c. The work done by the electric force on qo during its motion from A to B can be calculated using the formula:
W = qo * (V_B - V_A)
where W is the work done, qo is the charge, V_B is the electric potential at point B, and V_A is the electric potential at point A.
Plugging in the values, we get:
W = (3.00 x 10⁻⁶ C) * (2.25 x 10⁶ V - 1.125 x 10⁶ V)
Simplifying the expression, we find that the work done by the electric force on qo during its motion from A to B is 2.25 J.
d. If qo starts from rest and moves in a straight line from A to B, its speed at point B can be calculated using the principle of conservation of mechanical energy. The work done by the electric force (found in part c) is equal to the change in mechanical energy, given by:
ΔE = (1/2) * m * v_B²
where ΔE is the change in mechanical energy, m is the mass of qo, and v_B is the speed of qo at point B.
Rearranging the equation, we can solve for v_B:
v_B = sqrt((2 * ΔE) / m)
Plugging in the values, we get:
v_B = sqrt((2 * 2.25 J) / (5.00 kg))
Simplifying the expression, we find that the speed of qo at point B is approximately 0.67 m/s.
To know more about electric force:
https://brainly.com/question/31696602
#SPJ11
A car company claims that one of its vehicles could go up a hill with a slope of 39.1 degrees. What must be the minimum coefficient of static friction between the road and tires
The minimum coefficient of static friction between the road and tires of the vehicle must be at least 0.810 for the car to go up a hill with a slope of 39.1 degrees.
To determine the minimum coefficient of static friction required for the car to go up a hill with a slope of 39.1 degrees, we can use the following formula:
μ ≥ tan(θ)
where μ is the coefficient of static friction and θ is the angle of the slope.
Substituting the given values:
μ ≥ tan(39.1 degrees)
Using a calculator, we find:
μ ≥ 0.810
Therefore, the minimum coefficient of static friction required between the road and tires of the vehicle must be at least 0.810.
The complete question should be:
A car company claims that one of its vehicles could go up a hill with a slope of 39.1 degrees. What must be the minimum coefficient of static friction between the road and tires of the vehicle?
To learn more about static friction, Visit:
https://brainly.com/question/33058097
#SPJ11
Topic 4: A 3.0 kg falling rock has a kinetic energy equal to 2.430 J. What is its speed? Student(s) Responsible for Posting: Ezekiel Rose
The speed of the falling rock is approximately 1.27 m/s.
The kinetic energy (KE) of an object can be calculated using the equation:
KE = (1/2)mv^2
Where:
KE = Kinetic energy
m = Mass of the object
v = Velocity of the object
In this case, the kinetic energy (KE) is given as 2.430 J, and the mass (m) of the falling rock is 3.0 kg. We can rearrange the equation to solve for the velocity (v):
2.430 J = (1/2)(3.0 kg)(v^2)
Simplifying the equation:
2.430 J = (1.5 kg)(v^2)
Now, divide both sides of the equation by 1.5 kg:
v^2 = (2.430 J) / (1.5 kg)
v^2 = 1.62 m^2/s^2
Finally, take the square root of both sides to solve for the velocity (v):
v = √(1.62 m^2/s^2)
v ≈ 1.27 m/s
Therefore, the speed of the falling rock is approximately 1.27 m/s.
To know more about speed, refer here:
https://brainly.com/question/29457979#
#SPJ11
A house is heated by a 24.0-kW electric furnace. The local power company charges $0.0500 per kW.h and the heating bill for
January is $261. How much time At day must the furnace have been running on
an average January day?
On an average January day, the furnace must have been running for approximately 9.06 days.
To determine the amount of time the furnace must have been running on an average January day, we can use the formula:
Energy consumed = Power x Time
Given that the electric furnace has a power of 24.0 kW and the heating bill for January is $261, we can calculate the energy consumed:
Energy consumed = $261 / $0.0500 per kW.h = 5220 kW.h
Now, we can rearrange the formula to solve for time:
Time = Energy consumed / Power
Time = 5220 kW.h / 24.0 kW
Time = 217.5 hours
Since we're looking for the time in days, we divide by 24 to convert the hours to days:
Time = 217.5 hours / 24 hours/day
Time ≈ 9.06 days
Therefore, on an average January day, the furnace must have been running for approximately 9.06 days.
Learn more about divide here:
https://brainly.com/question/25289437
#SPJ11
3. A wheel rotates from rest with constant 1 rad/s2 acceleration. After first 5s of rotation the wheel has rotated through 12.5 rad. What is the angular velocity of the wheel at the end of that 5s? How long will it take the wheel to rotate through next 50 rad? 4. A car 1 of mass M=100 kg collides with a car 2 (m=500 kg) moving with velocity v=3m/s in the same direction as car 1. During the collision they couple and move with speed V=5m/s. Calculate the velocity of the car 1 before the collision. What fraction of the initial kinetic energy was lost during the collision?
It will take the wheel 5.384 seconds to rotate through the next 50 rad. The collision resulted in a loss of approximately 50.82% of the initial kinetic energy.
3. We can use the following kinematic formula for rotational motion:
θ = ωi*t + 1/2*α*t², where: θ = final angular displacement, ωi = initial angular velocity, t = time elapsed, α = angular acceleration
From rest, the initial angular velocity is 0. Thus, the formula becomes:
θ = 1/2*α*t²12.5 = 1/2*1*t²Solving for t, we get:t = 5 seconds
Therefore, the angular velocity at the end of that 5 seconds can be found using the following formula:
ωf = ωi + α*tωf = 0 + 1*5ωf = 5 rad/s
To find the time required for the wheel to rotate through the next 50 rad, we can use the following formula:
θ = ωi*t + 1/2*α*t²50 = 5t + 1/2*1*t²50 = 5t + 1/2*t²
Multiplying both sides by 2, we get:100 = 10t + t²Simplifying the equation:
t² + 10t - 100 = 0Using the quadratic formula, we get:t = 5.384 seconds (rounded off to three significant figures)
Therefore, it will take the wheel 5.384 seconds to rotate through the next 50 rad.
4. To solve this problem, we can use the law of conservation of momentum. According to the principle of conservation of momentum, the total momentum before the collision is conserved and remains equal to the total momentum after the collision.
M₁v₁ + m₂v₂ = (M₁ + m₂)V100v₁ + 500(3) = 600(5)100v₁ = 1500 - 1500100v₁ = 1350v₁ = 13.5 m/s
The velocity of car 1 before the collision is 13.5 m/s.
The initial total kinetic energy of the system can be determined by calculating the sum of the kinetic energies of the individual objects involved.
K1i = 1/2*M₁*v₁² + 1/2*m₂*v₂²K1i = 1/2*100*(13.5)² + 1/2*500*(3)²K1i = 15,262.5 J
The final total kinetic energy of the system can be determined by calculating the kinetic energy of the system after the collision has occurred.
K1f = 1/2*(M₁ + m₂)*V²K1f = 1/2*600*(5)²K1f = 7,500 J
The fraction of initial kinetic energy lost during the collision is:
K1lost/K1i = (K1i - K1f)/K1iK1lost/K1i = (15,262.5 - 7,500)/15,262.5K1lost/K1i = 0.5082 or 50.82%
Therefore, the collision resulted in a loss of approximately 50.82% of the initial kinetic energy.
Learn more about kinetic energy at: https://brainly.com/question/8101588
#SPJ11
6. A golf cart of 330Kg of mass moves horizontally and without
friction at 5m/s when
a 70Kg person originally at rest gets on the golf cart. What will
be the final speed
of the cart with the person?
The final speed of the golf cart with the person will be 4.26 m/s
Mass of golf cart = 330 kgMass of person = 70 kgTotal mass of the system, m = 330 + 70 = 400 kgInitial velocity of the golf cart, u = 5 m/sFinal velocity of the golf cart with the person, v = ?,
As per the law of conservation of momentum: Initial momentum of the system, p1 = m × u = 400 × 5 = 2000 kg m/sNow, the person gets on the golf cart. Hence, the system now becomes of 400 + 70 = 470 kg of mass.Let the final velocity of the system be v'.Then, the final momentum of the system will be: p2 = m × v' = 470 × v' kg m/sNow, as per the law of conservation of momentum:p1 = p2⇒ 2000 = 470 × v'⇒ v' = 2000/470 m/s⇒ v' = 4.26 m/s.
Therefore, the final velocity of the golf cart with the person will be 4.26 m/s. (rounded off to 2 decimal places).Hence, the final speed of the golf cart with the person will be 4.26 m/s (approximately).
Learn more on momentum here:
brainly.com/question/24030570
#SPJ11
Compact fluorescent (CFL) bulbs provide about four times as much visible light for a given amount of energy use. For example, a 14-watt CFL bulb provides about the same amount of visible light as a 60-watt incandescent bulb. LED lights are even more efficient at turning electrical energy into visible light. Does that mean they are both a lot hotter? Go online and research how fluorescent and compact fluorescent bulbs work. Describe how their operations and their spectra differ from those of incandescent light bulbs. Be sure to record your research sources.
Fluorescent,compact fluorescent bulbs operate differently from incandescent bulbs,resulting in differences in spectra,heat production. Both bulbs are more energy-efficient than incandescent bulbs.
Fluorescent bulbs work by passing an electric current through a gas-filled tube, which contains mercury vapor. The electrical current excites the mercury atoms, causing them to emit ultraviolet (UV) light. This UV light then interacts with a phosphor coating on the inside of the tube, causing it to fluoresce and emit visible light. The spectrum of fluorescent bulbs is characterized by distinct emission lines due to the specific wavelengths of light emitted by the excited phosphors. Incandescent bulbs work by passing an electric current through a filament, usually made of tungsten, which heats up and emits light as a result of its high temperature.
While fluorescent and CFL bulbs are more energy-efficient and produce less heat compared to incandescent bulbs, LED (light-emitting diode) lights are even more efficient. LED lights operate by passing an electric current through a semiconductor material, which emits light directly without the need for a filament or gas. LED lights convert a higher percentage of electrical energy into visible light, resulting in greater efficiency and minimal heat production.
Sources:
Energy.gov. (n.d.). How Fluorescent Lamps Work. Retrieved from https://www.energy.gov/energysaver/save-electricity-and-fuel/lighting-choices-save-you-money/how-energy-efficient-light-bulbs
Energy.gov. (n.d.). How Compact Fluorescent Lamps Work. Retrieved from https://www.energy.gov/energysaver/save-electricity-and-fuel/lighting-choices-save-you-money/how-energy-efficient-light-bulbs
Energy.gov. (n.d.). How Light Emitting Diodes Work. Retrieved from https://www.energy.gov/energysaver/save-electricity-and-fuel/lighting-choices-save-you-money/how-energy-efficient-light-bulbs
To learn more about compact fluorescent bulbs click here : brainly.com/question/31212425
#SPJ11
Question 3) Infrared light with a wavelength of 1271nm in the air is to be contained inside of a glass vessel (n=1.51) that contains air (n=1.000). There is a coating on the internal surface of the glass that is intended to produce a strong reflection back into the vessel. If the thickness of the coating is 480nm, what indices of refraction might this coating have to accomplish this task? Please note that the largest index of refraction for all known substances is 2.42.
To determine the indices of refraction needed for the coating on the internal surface of the glass vessel to produce strong reflection, we can utilize the concept of thin-film interference.
When light passes through different media, such as from air to glass, it can reflect off the boundaries between them.
For constructive interference and maximum reflection, the phase shift upon reflection must be an odd multiple of half the wavelength.
Given an infrared wavelength of 1271 nm in air and a glass vessel with an index of refraction of 1.51, we can calculate the wavelength of light in the glass as λ_glass = λ_air / n_glass = 1271 nm / 1.51 = 841 nm.
To produce strong reflection, the total distance traveled by the light in the coating and glass should be equal to an odd multiple of half the wavelength in the coating (480 nm) and glass (841 nm). Thus, we can set up an equation:
2n_coating * d_coating + 2n_glass * d_glass = (2m + 1) * λ_coating / 2
where n_coating and n_glass are the indices of refraction for the coating and glass, respectively, d_coating is the thickness of the coating, d_glass is the thickness of the glass vessel, λ_coating is the wavelength of light in the coating, and m is an integer.
Since we need to find the maximum possible index of refraction for the coating, we can assume the minimum value for n_glass, which is 1.51.
Solving the equation, we get:
2n_coating * 480 nm + 2 * 1.51 * d_glass = (2m + 1) * 841 nm / 2
Considering the maximum index of refraction for all known substances is 2.42, we can substitute this value for n_coating:
2 * 2.42 * 480 nm + 2 * 1.51 * d_glass = (2m + 1) * 841 nm / 2
Simplifying the equation, we find:
242 * 480 nm + 2 * 1.51 * d_glass = (2m + 1) * 841 nm / 2
For more such questions on strong reflection
https://brainly.com/question/14113791
#SPJ8
Each of the statments below may or may not be true. Enter the letters corresponding to all the true statements. (Give ALL correct answers, i.e., B, AC, BCD...) In the two-slit experiment, yl, the distance from the central maximum from the first bright spot ... A) decreases if the screen is moved away from the slits. B) doesn't depend on the slit separation. C) is always an integer multiple of the wavelength of the light. D) does not depend on the frequency of the light. E) is larger for blue light than for violet light.
The true statements from the given options are: B) Doesn't depend on the slit separation C) Is always an integer multiple of the wavelength of the light. D) Does not depend on the frequency of the light.
A) The distance yl from the central maximum to the first bright spot, known as the fringe width or the distance between adjacent bright fringes, is determined by the slit separation. Therefore, statement A is false. B) The distance yl is independent of the slit separation. It is solely determined by the wavelength of the light used in the experiment. As long as the wavelength remains constant, the distance yl will also remain constant. Hence, statement B is true. C) The distance yl between adjacent bright fringes is always an integer multiple of the wavelength of the light. This is due to the interference pattern created by the two slits, where constructive interference occurs at these specific distances. Therefore, statement C is true. D) The distance yl does not depend on the frequency of the light. The fringe separation is solely determined by the wavelength, not the frequency. As long as the wavelength remains constant, the distance yl remains the same. Hence, statement D is true. E) The statement about the comparison of yl for blue light and violet light is not provided in the given options, so we cannot determine its truth or falsity based on the given information. In summary, the true statements are B) Doesn't depend on the slit separation, C) Is always an integer multiple of the wavelength of the light, and D) Does not depend on the frequency of the light.
To learn more about frequency , click here : https://brainly.com/question/29739263
#SPJ11
In an engine, a piston oscillates with simple harmonic motion so that its position varies according to the expression x = 9.8 cos (14.5 t + 1.6) where x is in centimeters and t is in seconds. What is the Amplitude? What is the Angular Frequency? What is the Period?Find the initial position of the piston (t = 0). Find the initial velocity of the piston (t = 0). Find the initial acceleration of the piston (t = 0).
The amplitude of the piston's oscillation is 9.8 centimeters. The angular frequency is 14.5 radians per second. The period of the motion is approximately 0.436 seconds.
The given expression for the position of the piston, x = 9.8 cos (14.5 t + 1.6), represents simple harmonic motion. In this expression, the coefficient of the cosine function, 9.8, represents the amplitude of the oscillation. Therefore, the amplitude of the piston's motion is 9.8 centimeters.
The angular frequency of the oscillation can be determined by comparing the argument of the cosine function, 14.5 t + 1.6, with the general form of simple harmonic motion, ωt + φ, where ω is the angular frequency. In this case, the angular frequency is 14.5 radians per second. The angular frequency determines how quickly the oscillation repeats itself.
The period of the motion can be calculated using the formula T = 2π/ω, where T represents the period and ω is the angular frequency. Plugging in the value of ω = 14.5, we find that the period is approximately 0.436 seconds. The period represents the time taken for one complete cycle of the oscillation.
To find the initial position of the piston at t = 0, we substitute t = 0 into the given expression for x. Doing so gives us x = 9.8 cos (1.6). Evaluating this expression, we can find the specific value of the initial position.
The initial velocity of the piston at t = 0 can be found by taking the derivative of the position function with respect to time, dx/dt. By differentiating x = 9.8 cos (14.5 t + 1.6) with respect to t, we can determine the initial velocity.
Similarly, the initial acceleration of the piston at t = 0 can be found by taking the second derivative of the position function with respect to time, d²x/dt². Differentiating the position function twice will yield the initial acceleration of the piston.
Learn more about oscillation
brainly.com/question/15780863
#SPJ11
A dam has a horizontal pipe installed a distance hı below the water level. hi ? h2 The pipe has a diameter d and water exits it at height h2 above the ground. Answer the following in terms of h1, h2, d, and/or g. 1. What speed will water leave the pipe at? 2. What will the flow rate through the pipe be? 3. How far horizontally from the end of the pipe will the water land?
The horizontal distance the water travels is given by the equation d = V2 * t = √(2gh2) * t where t is the time it takes for the water to reach the ground.
We can do this with the following equations and concepts:
Continuity Equation for incompressible fluids, [tex]Q = A1V1 = A2V2[/tex]
Bernoulli's Principle, [tex]P1 + (1/2)ρV1² + ρgh1 \\= P2 + (1/2)ρV2² + ρgh2,[/tex]
where ρ is the density of water and g is the acceleration due to gravity
Speed of the water leaving the pipe: [tex]V2 = √(2gh2)[/tex]
Flow rate through the pipe:
[tex]Q = A2V2 = πd²/4 × √(2gh2)[/tex]
Horizontal distance from the end of the pipe that the water lands: [tex]d = V2 * t = √(2gh2) * t[/tex]
where t is the time for the water to land
Let's look at the question step-by-step and apply the equations above.
1. The speed of the water is given by the equation [tex]V2 = √(2gh2)[/tex] where h2 is the height of the water above the ground at the end of the pipe.
2.The flow rate is given by the equation
[tex]Q = A2V2[/tex]
= πd²/4 × √(2gh2)
where d is the diameter of the pipe.
3.The horizontal distance the water travels is given by the equation d = V2 * t = √(2gh2) * t where t is the time it takes for the water to reach the ground.
To learn more about distance visit;
https://brainly.com/question/13034462
#SPJ11
Under what condition is ∣ A + B ∣=∣ A ∣ + ∣ B ∣ ? The statement is never true. Vectors A and B are in opposite directions. Vectors A and B are in the same direction. The statement is always true. Vectors A and B are in perpendicular directions.
Under the condition that vectors A and B are in the same direction, the equation ∣ A + B ∣=∣ A ∣ + ∣ B ∣ holds. Vectors A and B are in the same direction.
Let A and B be any two vectors. The magnitude of vector A is represented as ∣ A ∣ .
When we add vectors A and B, the resultant vector is given by A + B.
The magnitude of the resultant vector A + B is represented as ∣ A + B ∣ .
According to the triangle inequality, the magnitude of the resultant vector A + B should be less than or equal to the sum of the magnitudes of the vectors A and B individually. That is,∣ A + B ∣ ≤ ∣ A ∣ + ∣ B ∣
But, this inequality becomes equality when vectors A and B are in the same direction.
In other words, when vectors A and B are in the same direction, the magnitude of their resultant vector is equal to the sum of their individual magnitudes. Thus, the equation ∣ A + B ∣=∣ A ∣ + ∣ B ∣ holds for vectors A and B in the same direction.
Therefore, the answer is vectors A and B are in the same direction.
Learn more about the triangle inequality: https://brainly.com/question/22559201
#SPJ11
a.) A solenoid is constructed from 5,000 turns of wire onto a form length of 6.28 cm and a diameter of 4.513 cm. The solenoid is connected to a battery so that the current increases from 0 A to 4.00 mA in a time of 8.00 ms. Calculate B inside the coil at 8.00 microseconds, in microTeslas.
b.) What is the inductance of the solenoid, in henrys?
c.) What is the absolute value of EMF induced in the inductor, in mV?
d.) What is the maximum energy stored in the inductor, in microJuoles?
e.) Determine the energy density inside the inductor, in mJ/m^3
I.) Insert an iron core with Km = 1000 into the bore of the solenoid, competely filling it. Calculate the new self-inductance (L) in henrys.
II.) How much energy is stored in inductor, in mJ?
III.) Insert the coil without iron into another coil of length 6.28 cm and diameter of 9.026 cm with 2,500 turns. Calculate the mutual inductance (M) between the 2 coils, in henrys.
IV.) If the inner solenoid is connected to a battery so that the current increases from 0 A to 4.00 mA in a time of 8.00 ms. Calculate the absolute value of the voltage (V) induced in secondary coil at a time of 8.00 ms, in mV.
a.) Formula used is, μ0 = 4π × 10-7 Tm/A. The current passing through the solenoid at 8 microseconds (μs) = 4.00 mA. Hence, μ = NI = (5000 × 4.00 × 10-3)A. Using the formula, μ = μ0n2A, we can write B as:μ = μ0n2πr2lB = μ/nA = (μ0 × (5000 × 4.00 × 10-3))/ (5 × 10-3 × π × (2.2565 × 10-2)2)B = 0.7540T
b.) The inductance (L) of the solenoid is given by the formula, L = μ02n2Al.
The area of the cross-section of the solenoid is given as A = πr2L, where r is the radius. Hence, we can substitute the value of A in the formula for inductance and get:L = (μ0nr2)2 πl = (μ0n2πr2l)/4π2L = (μ0 × (5000)2 × π × (2.2565 × 10-2)2 × 6.28 × 10-2)/(4 × π2)L = 1.635 × 10-3 Hc.) EMF induced in the inductor is given by the formula, EMF = L × dI/dt. Here, dI is the change in current and dt is the time it takes to change.
The current in the solenoid at 8 microseconds = 4.00 mA and at 0 microseconds (initial current) = 0A. Hence, dI = 4.00 mA - 0A = 4.00 mA. Also, dt = 8.00 μs. Therefore, EMF = L × (dI/dt) = (1.635 × 10-3)H × [(4.00 × 10-3)/(8.00 × 10-6)]EMF = 817.5 mVd.) The maximum energy stored in an inductor is given by the formula, Em = ½ LI2. The current flowing through the solenoid at 8 microseconds = 4.00 mA.
Hence, I = 4.00 mA. Therefore, Em = ½ × (1.635 × 10-3) × (4.00 × 10-3)2Em = 13.12 μJ.e.) Energy density (u) inside the inductor is given by the formula, u = (B2/2μ0). Hence, u = (0.7540)2/(2 × 4π × 10-7)u = 0.2837 mJ/m3I.) For a solenoid with an iron core, the formula for inductance (L) is, L = (μμ0n2A)/l = KmL0, where Km is the relative permeability of the iron core and L0 is the inductance of the solenoid without the core.
Here, Km = 1000. Hence, L = KmL0 = 1000 × 1.635 × 10-3L = 1.635 HII.) The energy stored in an inductor is given by the formula, E = ½ LI2. Hence, E = ½ × (1.635) × (4.00 × 10-3)2E = 13.12 mJIII.) Mutual inductance (M) between two coils is given by the formula, M = (μμ0n1n2A)/l.
Here, n1 and n2 are the number of turns in each coil. The area of cross-section of the coil is given by A = πr2L, where r is the radius of the coil and L is the length. Hence, A = π × (4.513/2)2 × 6.28 × 10-2 = 1.006 × 10-3 m2. Thus, M = (μμ0n1n2A)/l = (4π × 10-7 × 2500 × 5000 × 1.006 × 10-3)/(6.28 × 10-2)M = 1.595 × 10-3 HIV.) The voltage (V) induced in a coil is given by the formula, V = M × (dI/dt).
Here, dI is the change in current and dt is the time it takes to change. The current flowing through the inner solenoid at 8 microseconds (μs) = 4.00 mA. Hence, I = 4.00 mA. Therefore, dI/dt = (4.00 × 10-3)/(8.00 × 10-6). Also, M = 1.595 × 10-3 H. Thus, V = M × (dI/dt) = 1.595 × 10-3 × [(4.00 × 10-3)/(8.00 × 10-6)]V = 798.5 mV (rounded off to 3 decimal places)Therefore, a.) B inside the coil at 8.00 microseconds (μs) = 0.7540 μTb.)
The inductance of the solenoid, L = 1.635 mHc.) The absolute value of EMF induced in the inductor, EMF = 817.5 mVd.) The maximum energy stored in the inductor, Em = 13.12 μJe.)
The energy density inside the inductor, u = 0.2837 mJ/m3I.) The new self-inductance (L) of the solenoid with an iron core is, L = 1.635 HII.) The energy stored in inductor with an iron core, E = 13.12 mJIII.)
The mutual inductance (M) between the two coils is, M = 1.595 × 10-3 HIV.) The absolute value of voltage induced in secondary coil at a time of 8.00 ms, V = 798.5 mV (rounded off to 3 decimal places).
To know more about current visit :
https://brainly.com/question/32059694
#SPJ11
Question 6 ( 5 points) In the figure below all the resistors have resistance 58 Ohms and all the capacitors have capacitance 21 F. Calculate the time constant of the circuit (in s).
The time constant of the circuit in seconds is 1218 s,
The capacitive reactance and resistance of each capacitor and resistor in the circuit respectively can be calculated using the following equations; capacitive reactance of a capacitor
= Xc =1/2πfC Ohms
Resistance is a measure of an electrical circuit's resistance to current flow. Resistance is measured in ohms, which is represented by the Greek letter omega (). Ohms are named after German physicist Georg Simon Ohm (1784-1854), who researched the link between voltage, current, and resistance.
where f = frequency and C = capacitance and resistors resistance, R = 58 ohms.
The time constant (τ) of the circuit can be calculated as follows;
τ = R × C, where R = resistance and C = capacitance.
The time constant of the circuit in seconds is given by τ = R × C = 58 ohms × 21 F = 1218 s
To learn about resistance here:
https://brainly.com/question/30901006
#SPJ11
How many moles of acetic acid would you need to add to 2.00 l of water to make a solution with a ph of 2.25?
Approximately 0.005623 moles of acetic acid would be needed to achieve a solution with a pH of 2.25 in 2.00 liters of water.
To determine the number of moles of acetic acid needed to achieve a pH of 2.25 in a solution, we first need to understand the relationship between pH, concentration, and dissociation of the acid.
Acetic acid (CH3COOH) is a weak acid that partially dissociates in water. The dissociation can be represented by the equation: CH3COOH ⇌ CH3COO- + H+
The pH of a solution is a measure of its acidity and is defined as the negative logarithm (base 10) of the concentration of hydrogen ions (H+). The pH scale ranges from 0 to 14, where a pH of 7 is considered neutral, below 7 is acidic, and above 7 is basic.
In the case of acetic acid, we need to calculate the concentration of H+ ions that corresponds to a pH of 2.25. The concentration can be determined using the formula:
[H+] = 10^(-pH)
[H+] = 10^(-2.25)
Once we have the concentration of H+ ions, we can assume that the concentration of acetic acid (CH3COOH) will be equal to the concentration of the H+ ions, as the acid partially dissociates.
Now, to calculate the number of moles of acetic acid needed, we multiply the concentration (in moles per liter) by the volume of the solution. In this case, the volume is given as 2.00 liters.
Number of moles of acetic acid = Concentration (in moles/L) * Volume (in liters)
Substitute the concentration of H+ ions into the equation and calculate the number of moles of acetic acid.
To learn more about pH, Click here: brainly.com/question/2288405?
#SPJ11
(18.) A rotor completes 50.0 revolutions in 3.25 s. Find its angular speed (a) in rev/s. (b) in rpm. (C) in rad/s. 19. A flywheel rotates at 1050rpm. (a) How long (in s) does it take to complete ofe revolution? (b) How many revolutions does it complete in 5.00 s ? (20) A wheel rotates at 36.0rad/s. (a) How long (in s) does it take to complete ont revolution?(b) How many revolutions does it complete in 8.00 s ? 21. A shaft of radius 8.50 cm rotates 7.00rad/s. Find its angular displacement (in rad) in 1.20 s. 22. A wheel of radius 0.240 m turns at 4.00rev/s. Find its angular displacement (in rev) in 13.0 s. Q3. A pendulum of length 1.50 m swings through an arc of 5.0 ∘ . Find the length of the arc through which the pendulum swings. (44) An airplane circles an airport twice while 5.00mi from the control tower. Find the length of the arc through which the plane travels. 25. A wheel of radius 27.0 cm has an angular speed of 47.0rpm. Find the lineat speed (in m/s ) of a point on its rim. (29. A belt is placed around a pulley that is 30.0 cm in diameter and rotating at 275rpm. Find the linear speed (in m/s ) of the belt. (Assume no belt slippage on the pulley.) 27. A flywheel of radius 25.0 cm is rotating at 655rpm. (a) Express its angular speed in rad/s. (b) Find its angular displacement (in rad) in 3.00 min. (c) Find the linear distance traveled (in cm ) by a point on the rim in one complete revolution. (d) Find the linear distance traveled (in m ) by a point on the rim in 3.00 min. (e) Find the linear speed (in m/s ) of a point on the rim. 28. An airplane propeller with blades 2.00 m long is rotating at 1150rpm.(a) Express its angular speed in rad/s. (b) Find its angular displacement in 4.00 s. (C) Find the linear speed (in m/s ) of a point on the end of the blade. (d) Find the linear speed (in m/s) of a point 1.00 m from the end of the blade. 29. An automobile is traveling at 60.0 km/h. Its tires have a radius of 33.0 cm. (a) Find the angular speed of the tires (in rad/s ). (b) Find the angular displacement of the tires in 30.0 s. (c) Find the linear distance traveled by a point on the tread in 30.0 s. (d) Find the linear distance traveled by the automobile in 30.0 s. 30. Find the angular speed (in rad/s ) of the following hands on a clock. (a) Second hand (b) Minute hand (c) Hour hand 31. A bicycle wheel of diameter 30.0 in. rotates twice each second. Find the linear velocity of a point on the wheel. 32. A point on the rim of a flywheel with radius 1.50ft has a linear velocity of 30.0ft/s. Find the time for it to complete 4πrad.
18. (a) The angular speed in revolutions per second is 50.0 rev / 3.25 s = 15.38 rev/s.
(b) The angular speed in revolutions per minute is 50.0 rev / 3.25 s × 60 s/min = 923.08 rpm.
(c) The angular speed in radians per second is 50.0 rev / 3.25 s × 2π rad/rev = 96.25 rad/s.
19. (a) To complete one revolution, the time taken is 60 s / 1050 rpm = 0.0571 s.
(b) In 5.00 s, the number of revolutions completed is 5.00 s × 1050 rpm / 60 s = 87.5 rev.
20. (a) To complete one revolution, the time taken is 2π rad / 36.0 rad/s = 0.1745 s.
(b) In 8.00 s, the number of revolutions completed is 8.00 s × 36.0 rad/s / (2π rad) = 18.00 rev.
21. The angular displacement in radians is given by angular speed (ω) multiplied by time (t):
Angular displacement = ω × t = 7.00 rad/s × 1.20 s = 8.40 rad.
22. The angular displacement in revolutions is given by angular speed (ω) multiplied by time (t):
Angular displacement = ω × t = 4.00 rev/s × 13.0 s = 52.0 rev.
23. The length of the arc through which the pendulum swings is given by the formula:
Arc length = (θ/360°) × 2π × radius,
where θ is the angle in degrees and radius is the length of the pendulum.
Arc length = (5.0°/360°) × 2π × 1.50 m = 0.131 m.
24. The length of the arc through which the airplane travels is equal to the circumference of the circle it makes:
Arc length = 2π × radius = 2π × 5.00 mi = 31.42 mi.
25. The linear speed of a point on the rim of the wheel is given by the formula:
Linear speed = angular speed (ω) × radius.
Linear speed = 27.0 cm × 47.0 rpm × (2π rad/1 min) × (1 min/60 s) = 7.02 m/s.
26. The linear speed of the belt is equal to the linear speed of the pulley, which is given by the formula:
Linear speed = angular speed (ω) × radius.
Linear speed = 30.0 cm × 275 rpm × (2π rad/1 min) × (1 min/60 s) = 143.75 m/s.
27. (a) The angular speed in rad/s is equal to the angular speed in rpm multiplied by (2π rad/1 min):
Angular speed = 655 rpm × (2π rad/1 min) = 6877.98 rad/s.
(b) The angular displacement in radians is equal to the angular speed multiplied by time in minutes:
Angular displacement = 6877.98 rad/s × 3.00 min = 20633.94 rad.
(c) The linear distance traveled by a point on the rim in one complete revolution is equal to the circumference of the circle:
Linear distance = 2π v radius = 2 π × 25.0 cm = 157.08 cm.
(d) The linear distance traveled by a point on the rim in 3.00 min is equal to the linear speed multiplied by time:
Linear distance = 143.75 m/s × 3.00 min = 431.25 m.
(e) The linear speed of a point on the rim is equal to the angular speed multiplied by the radius:
Linear speed = 6877.98 rad/s × 0.25 m = 1719.50 m/s.
28. (a) The angular speed in rad/s is equal to the angular speed in rpm multiplied by (2π rad/1 min):
Angular speed = 1150 rpm × (2π rad/1 min) = 12094.40 rad/s.
(b) The angular displacement in radians is equal to the angular speed multiplied by time in seconds:
Angular displacement = 12094.40 rad/s × 4.00 s = 48377.60 rad.
(c) The linear speed of a point on the end of the blade is equal to the angular speed multiplied by the radius:
Linear speed = 12094.40 rad/s × 2.00 m = 24188.80 m/s.
(d) The linear speed of a point 1.00 m from the end of the blade is equal to the angular speed multiplied by the radius:
Linear speed = 12094.40 rad/s × 1.00 m = 12094.40 m/s.
29. (a) The angular speed of the tires in rad/s is equal to the linear speed divided by the radius:
Angular speed = 60.0 km/h × (1000 m/1 km) / (3600 s/1 h) / (33.0 cm/100 m) = 0.0303 rad/s.
(b) The angular displacement of the tires in radians is equal to the angular speed multiplied by time in seconds:
Angular displacement = 0.0303 rad/s × 30.0 s = 0.909 rad.
(c) The linear distance traveled by a point on the tread in 30.0 s is equal to the linear speed multiplied by time:
Linear distance = 60.0 km/h × (1000 m/1 km) / (3600 s/1 h) × 30.0 s = 500.0 m.
(d) The linear distance traveled by the automobile in 30.0 s is equal to the linear speed multiplied by time:
Linear distance = 60.0 km/h × (1000 m/1 km) / (3600 s/1 h) × 30.0 s = 500.0 m.
30. The angular speed of the clock hands is as follows:
(a) The second hand completes one revolution in 60 s, so its angular speed is 2π rad/60 s.
(b) The minute hand completes one revolution in 60 min, so its angular speed is 2π rad/60 min.
(c) The hour hand completes one revolution in 12 hours, so its angular speed is 2π rad/12 hours.
31. The linear velocity of a point on the wheel is given by the formula:
Linear velocity = angular velocity (ω) × radius.
Linear velocity = 2π × (15.0 in./2) × (2 rev/s)
= 60π in/s.
32. The time to complete 4π radians is given by the formula:
Time = (4π rad) / (angular velocity) = (4π rad) / (30.0 ft/s / 1.50 ft)
= 2.52 s.
Read more on Kinematics here: https://brainly.com/question/26407594
#SPJ11
This time the pendulum is 2.05 m'long. Suppose you start with the pendulum hanging vertically, at rest. You then give it a push so that it starts swinging with a speed of 2.04 m/s. What maximum angle (in degrees) will it reach, with respect to the vertical, before falling back down? 18.4 degrees 34.2 degrees 30.3 degrees 26.3 degrees This time, the pendulum is 1.25 m long and has a mass of 3.75 kg. You give it a push away from vertical so that it starts swinging with a speed of 1.39 m/s. Due to friction at the pivot point, 1.00 Joule of the pendulum s initial kinetic energy is lost as heat during the upward swing. What maximum angle will it reach, with respect to the vertical, before falling back down? 22.9 degrees 33.0 degrees 28.0 degrees 19.4 degrees
In the first scenario, where the pendulum is 2.05 m long and starts swinging with a speed of 2.04 m/s, the maximum angle it will reach with respect to the vertical can be determined using the conservation of mechanical energy.
By equating the initial kinetic energy to the change in potential energy, we can calculate the maximum height reached by the pendulum. Using this height and the length of the pendulum, we can find the maximum angle it will reach, which is approximately 18.4 degrees.
In the second scenario, with a pendulum length of 1.25 m, mass of 3.75 kg, and 1.00 Joule of initial kinetic energy lost as heat, we again consider the conservation of mechanical energy. By subtracting the energy lost as heat from the initial mechanical energy and equating it to the change in potential energy, we can find the maximum height reached by the pendulum. Using this height and the length of the pendulum, we can determine the maximum angle it will reach, which is approximately 33.0 degrees.
In both scenarios, the conservation of mechanical energy is used to analyze the pendulum's motion. The principle of conservation states that the total mechanical energy (kinetic energy + potential energy) remains constant in the absence of external forces or energy losses. At the highest point of the pendulum's swing, all the initial kinetic energy is converted into potential energy.
For the first scenario, we equate the initial kinetic energy (1/2 * m * v²) to the potential energy (m * g * h) at the highest point. Rearranging the equation allows us to solve for the maximum height (h). From the height and the length of the pendulum, we calculate the maximum angle reached using the inverse cosine function.
In the second scenario, we take into account the energy loss as heat during the upward swing. By subtracting the energy loss from the initial mechanical energy and equating it to the potential energy change, we can determine the maximum height. Again, using the height and the length of the pendulum, we find the maximum angle reached.
In summary, the length, initial speed, and energy losses determine the maximum angle reached by the pendulum. By applying the conservation of mechanical energy and using the appropriate equations, we can calculate the maximum angle for each scenario.
Learn more about kinetic energy here:
brainly.com/question/999862
#SPJ11