The sound intensity level in dB of the alarm clock at the ear is 68 dB.
The intensity level at the threshold of pain is 120 dB.
The given parameters are:
Sonic power = 50 x 10-9 W m2
Threshold of pain = 1.0 W m2
To determine the sound intensity level in dB of the alarm clock at the ear, we can use the following formula:
Sound intensity level,
β = 10 log(I/I₀)
where
I is the sound intensity of the alarm clock
I₀ is the threshold of hearing.
I₀ = 1 x 10-12 W/m2
Hence,
I = 50 x 10-9 W/m2
= 5 x 10-8 W/m2
Putting the value of I₀ and I in the formula of β
β = 10 log(I/I₀)
β = 10 log(5 x 10-8/1 x 10-12)
β = 68 dB
Therefore, the sound intensity level in dB of the alarm clock at the ear is 68 dB.
Also, the intensity level at the threshold of pain is 1 W/m2.
To determine this in dB, we can use the formula given below:
Intensity level in dB,
β = 10 log(I/I₀)
We are given:
I = 1 W/m2
I₀ = 1 x 10-12 W/m2
Therefore,
β = 10 log(1/1 x 10-12)
β = 10 log 1012
β = 10 x 12
β = 120 dB
Thus, the intensity level at the threshold of pain is 120 dB.
Learn more about the sound intensity:
brainly.com/question/30338997
#SPJ11
A blue puck has a velocity of 0i – 3j m/s and a mass of
4 kg. A gold puck has a velocity of 12i – 5j m/s and a mass of 6
kg. What is the kinetic energy of the system?
a. 90 J
b. 489 J
c. 525 J
d.
Kinetic energy (KE) is the energy of motion, which is the energy that an object has when it is in motion.
Thus, the answer is d.
When an object is in motion, it can do work by moving other objects, and kinetic energy is the energy that is needed to do this work. KE is given by KE= 1/2mv^2, where m is the mass of the object and v is the velocity of the object. The kinetic energy of the system is given by the sum of the kinetic energy of both the blue puck and the gold puck.
The kinetic energy of the blue puck is given by: KE_blue = (1/2) × 4 kg × (0i - 3j m/s)²= (1/2) × 4 kg × 9 m²/s²= 18 J The kinetic energy of the gold puck is given by: KE_gold = (1/2) × 6 kg × (12i - 5j m/s)²= (1/2) × 6 kg × (144 + 25) m²/s²= 870 J Therefore, the kinetic energy of the system is given by:KE_system = KE_blue + KE_gold= 18 J + 870 J= 888 J.
To know more about energy of motion visit:-
https://brainly.com/question/22252564
#SPJ11
Find the curcet trough the 12 if resistor Express your answer wim Be appropriate tanits, Xe Inecerect; Try Again; 4 atsempts nemaining Part B Find the polntial dillererice acrons the 12fl sesivice Eupress yeur anwwer with the apprsprate units. 2. Incarect; Try Again, 5 aftartepes rewaining Consijer the circuat in (Figure 1) Find the currert through the 20 S resistor. Express your answer with the appropriate units. X. Incorreet; Try Again; 5 attempts raenaining Figure Part D Find tie posertial dAterence acioss itu 20 S fesisfor: Express your answer with the appropriate units. Contidor the orcut in (Fimuse-1). Find the current through the 30Ω resislor, Express your answer with the appropriate units. X Incorrect; Try Again; 5 attempts remaining Figure- Part F Find thes polesntax diferenos ansoss the 30I resistor. Express your answer with the appropriste units.
The current through the 12 Ω resistor is 0.4167 A. In the given circuit, the 12 Ω resistor is in series with other resistors. To find the current, we can apply Ohm's Law (V = I * R), where V is the voltage across the resistor and R is the resistance.
The voltage across the 12 Ω resistor is the same as the voltage across the 30 Ω resistor, which is given as 5 V. Therefore, the current through the 12 Ω resistor can be calculated as I = V / R = 5 V / 12 Ω = 0.4167 A.
In the circuit, the potential difference across the 12 Ω resistor is 5 V. This is because the voltage across the 30 Ω resistor is given as 5 V, and since the 12 Ω resistor is in series with the 30 Ω resistor, they share the same potential difference.
The 12 Ω resistor is in series with other resistors in the circuit. When resistors are connected in series, the total resistance is equal to the sum of individual resistances. In this case, we are given the voltage across the 30 Ω resistor, which allows us to calculate the current through it using Ohm's Law.
Since the 12 Ω resistor is in series with the 30 Ω resistor, they share the same current. We can then calculate the current through the 12 Ω resistor by applying the same current value. Furthermore, since the 12 Ω resistor is in series with the 30 Ω resistor, they have the same potential difference across them.
Thus, the potential difference across the 12 Ω resistor is equal to the potential difference across the 30 Ω resistor, which is given as 5 V.
To learn more about resistor click here brainly.com/question/30672175
#SPJ11
10: (-/1 Points) DETAILS SERPSE10 6.4.P.021.MI. A small, spherical bead of mass 3.40 g is released from rest att 0 from a point under the surface of a viscous liquid. The terminal speed is observed to be 10 (a) Find the value of the constant b in the equation - N/m (b) Find the time at which the bead reaches 0.632 (c) Find the value of the resistive force when the bead reaches terminal speed. Need Help? Master
A. the value of the constant b in the equation is 0.00314 Ns²/m.
B. the time at which the bead reaches 0.632 is 6.03 s.
C. the value of the resistive force when the bead reaches terminal speed is 0.00314 Ns²/m.
(a) The equation of motion for a particle that moves through a viscous fluid is given by:
mv + bv² = mg
Where:
v is the velocity of the particle at any time,
m is the mass of the particle,
b is the coefficient of viscosity of the fluid,
g is the acceleration due to gravity, and
v₀ is the initial velocity of the particle.
At terminal velocity, there is no acceleration, thus, the velocity becomes constant and equal to the terminal velocity:
v = vT
Therefore, the equation of motion can be written as:
mg = bvT²
Solving for b, we have:
b = mg/vT²
Substituting the given values: mass m = 3.40 g = 0.00340 kg; vT = 10 m/s; g = 9.8 m/s², we get:
b = 0.00340 kg × 9.8 m/s² / (10 m/s)²
b = 0.00314 Ns²/m
(b) The equation of motion is given by:
mv + bv² = mg
We can write this as:
m dv/dt + bv² = mg
Rearranging this equation, we get:
mdv/mg - b/mg v² = dt
Integrating both sides, we get:
-1/bg ln (mg - bv) = t + C
Where:
C is the constant of integration. At time t = 0, v = 0, thus:
mg = bv₀
Solving for C, we have:
-1/bg ln m = C
Substituting this in the equation of motion above, we get:
-1/bg ln (mg - bv) = t -1/bg ln m
At t = t₁, v = 0.632vT = 0.632 × 10 m/s = 6.32 m/s
Substituting the values of v and t in the equation of motion, we have:
-1/bg ln (mg - bv) = t₁ -1/bg ln m
mg - bv = me^(-bt/g)
Substituting the given values of mass, velocity, and b, we get:
0.00340 kg × 9.8 m/s² - 0.00314 Ns²/m (6.32 m/s) = 0.00340 kg e^(-0.00314t₁/0.00340)
Solving for t₁, we get:
t₁ = 0.00340/0.00314 ln(0.00340 × 9.8/0.00314 × 6.32) ≈ 6.03 s
(c) At terminal velocity, the resistive force is equal and opposite to the weight of the bead, thus:
mg = bvT²
Substituting the given values: mass m = 3.40 g = 0.00340 kg; vT = 10 m/s; g = 9.8 m/s², we get:
b = mg/vT² = 0.00340 kg × 9.8 m/s² / (10 m/s)²
b = 0.00314 Ns²/m
Therefore, the value of the resistive force when the bead reaches terminal speed is 0.00314 Ns²/m.
To learn more about constant, refer below:
https://brainly.com/question/31730278
#SPJ11
You whirl a stone on a string in a horizontal circle of radius 1.25 m located 1.80 m above level ground. The string breaks and the stone flies off horizontally, striking the ground 8.00 m away. If the stone’s mass was 0.500 kg, what was the magnitude of the tension in the string before it broke?
The radius of the circle is given by r = 1.25 m. The height of the stone from the ground is 1.80 m. The horizontal distance the stone moves is 8.00 m. The mass of the stone is 0.500 kg.
We need to find the magnitude of the tension in the string before it broke.
Step 1: Finding the velocity of the stone when it broke away.
The velocity of the stone is given by the equation:v² = u² + 2as where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the distance covered by the stone.
Let u = 0, a = g, and s = 1.80 m, the equation becomes:
v² = 0 + 2g × 1.80 = 3.6gv = √(3.6g) m/s where g is the acceleration due to gravity.
Step 2: Finding the time the stone takes to travel 8.00 m.
The time the stone takes to travel 8.00 m is given by the equation:t = s/v = 8.00/√(3.6g) s.
Step 3: Find the magnitude of the tension in the string.
The magnitude of the tension in the string is given by the equation: F = (m × v²)/r where m is the mass of the stone, v is the velocity of the stone when the string broke, and r is the radius of the circle.
F = (0.500 × 3.6g)/1.25 = (1.8g)/1.25 = 1.44g = 1.44 × 9.81 = 14.1 N.
Therefore, the magnitude of the tension in the string before it broke was 14.1 N.
#SPJ11
Learn more about magnitude and circle https://brainly.com/question/20905151
In a small shire of Birmingham a 0.047 uF capacitor is being held at a potential difference of 32 uV. What is the charge of these Birmingham located plates, in coulombs, on one of the plates?
In a small shire of Birmingham a 0.047 μF capacitor is being held at a potential difference of 32 μV. the charge on one of the plates of the capacitor located in Birmingham is approximately 1.504 × 10^-10 coulombs (C).
To find the charge on one of the plates of a capacitor, we can use the formula:
Q = C × V
Where:
Q is the charge on one of the plates,
C is the capacitance of the capacitor,
V is the potential difference across the capacitor.
In this case, the capacitance is given as 0.047 μF (microfarads) and the potential difference is 32 uV (microvolts). However, it is important to note that the unit of voltage used in the SI system is volts (V), not microvolts (uV). Therefore, we need to convert the potential difference to volts before calculating the charge.
1 μV = 1 × 10^-6 V
Therefore, 32 uV = 32 × 10^-6 V = 3.2 × 10^-5 V
Now we can calculate the charge using the formula:
Q = (0.047 μF) × (3.2 × 10^-5 V)
Since the unit of capacitance is microfarads (μF) and the unit of voltage is volts (V), the resulting unit of charge will be microcoulombs (μC).
Q = (0.047 × 10^-6 F) × (3.2 × 10^-5 V)
= 1.504 × 10^-10 C
Therefore, the charge on one of the plates of the capacitor located in Birmingham is approximately 1.504 × 10^-10 coulombs (C).
To learn more about capacitor visit: https://brainly.com/question/30529897
#SPJ11
A pair of parallel slits separated by 1.90 x 10-4 m is illuminated by 673 nm light and an interference pattern is observed on a screen 2.30 m from the plane of the slits. Calculate the difference in path lengths from each of the slits to the location on the screen of a fourth-order bright fringe and a fourth dark fringe. (Enter your answers in m.) HINT (a) a fourth-order bright fringe 0.03258 Xm (b) a fourth dark fringe m Need Help? Read
A pair of parallel slits separated, the difference in path lengths from each of the slits to the location on the screen of a fourth-order bright fringe and a fourth dark fringe is approximately 0.03258 m for both cases.
The path length difference for a bright fringe (constructive interference) and a dark fringe (destructive interference) in a double-slit experiment is given by the formula:
[tex]\[ \Delta L = d \cdot \frac{m \cdot \lambda}{D} \][/tex]
Where:
[tex]\( \Delta L \)[/tex] = path length difference
d = separation between the slits ([tex]\( 1.90 \times 10^{-4} \) m[/tex])
m = order of the fringe (4th order)
[tex]\( \lambda \)[/tex] = wavelength of light 673 nm = [tex]\( 673 \times 10^{-9} \) m[/tex]
D = distance from the slits to the screen (2.30 m)
Let's calculate the path length difference for both cases:
a) For the fourth-order bright fringe:
[tex]\[ \Delta L_{\text{bright}} = d \cdot \frac{m \cdot \lambda}{D} = (1.90 \times 10^{-4} \, \text{m}) \cdot \frac{4 \cdot (673 \times 10^{-9} \, \text{m})}{2.30 \, \text{m}} \][/tex]
b) For the fourth-order dark fringe:
[tex]\[ \Delta L_{\text{dark}} = d \cdot \frac{m \cdot \lambda}{D} = (1.90 \times 10^{-4} \, \text{m}) \cdot \frac{4 \cdot (673 \times 10^{-9} \, \text{m})}{2.30 \, \text{m}} \][/tex]
Now, let's calculate these values:
a) Bright fringe:
[tex]\[ \Delta L_{\text{bright}} = (1.90 \times 10^{-4} \, \text{m}) \cdot \frac{4 \cdot (673 \times 10^{-9} \, \text{m})}{2.30 \, \text{m}}\\\\ \approx 0.03258 \, \text{m} \][/tex]
b) Dark fringe:
[tex]\[ \Delta L_{\text{dark}} = (1.90 \times 10^{-4} \, \text{m}) \cdot \frac{4 \cdot (673 \times 10^{-9} \, \text{m})}{2.30 \, \text{m}}\\\\ \approx 0.03258 \, \text{m} \][/tex]
Thus, the difference in path lengths from each of the slits to the location on the screen of a fourth-order bright fringe and a fourth dark fringe is approximately [tex]\( 0.03258 \, \text{m} \)[/tex] for both cases.
For more details regarding dark fringe, visit:
https://brainly.com/question/33849665
#SPJ12
A 18 ms wind is blowing toward a direction of 245° measured in the positive direction from the axis (with east-degrees) How strong, is the north/south component of this wind, and what direction is it
The north/south component of the wind is approximately 15.8 m/s in the south direction.
To find the north/south component of the wind, we need to find the cosine of the angle between the wind direction and the north/south axis, not the sine
Wind direction: 245° measured in the positive direction from the east axis
Wind speed: 18 m/s
To find the north/south component, we can use the formula:
North/South Component = cos(θ) × Wind Speed
θ is the angle between the wind direction and the north/south axis. To determine this angle, we need to subtract the wind direction from 90° since the north/south axis is perpendicular to the east/west axis.
θ = 90° - 245° = -155°
Using the cosine function, we can calculate the north/south component:
North/South Component = cos(-155°) × 18 m/s
Now, let's calculate the north/south component:
North/South Component = cos(-155°) × 18 m/s ≈ -15.8 m/s
The negative sign indicates that the north/south component is directed southwards.
Therefore, the answer is:
The north/south component of the wind is approximately 15.8 m/s in the south direction.
Learn more about wind at: https://brainly.com/question/15321264
#SPJ11
When light of wavelength 240 nm falls on a tungsten surface, electrons having a maximum kinetic energy of 0.67 eV are emitted. Find values for the following.
(a) the work function of tungsten
eV
(b) the cutoff wavelength
nm
(c) the frequency corresponding to the cutoff wavelength
Hz
(a) The work function of tungsten = 4.93 × 10-19 J. (b) The cutoff wavelength is 511.14 nm. (c) The frequency corresponding to the cutoff wavelength is 5.87 × 1014 Hz.
The work function of tungsten, Φ = hf - Kmax = (6.626 × 10-34 J s × c) / λ - 1.072 × 10-19 J, where c = 3 × 10^8 m/s is the speed of light.
Substituting the values, Φ = (6.626 × 10-34 J s × 3 × 108 m/s) / (240 × 10-9 m) - 1.072 × 10-19 J = 4.93 × 10-19 J. The cutoff wavelength is given by hc/Φ, where h is Planck’s constant and c is the speed of light.
Substituting the values, λc = hc/Φ = (6.626 × 10-34 J s × 3 × 108 m/s) / 4.93 × 10-19 J = 511.14 nm.
The frequency corresponding to the cutoff wavelength is f = c/λc = (3 × 108 m/s) / (511.14 × 10-9 m) = 5.87 × 1014 Hz.
Therefore, the work function of tungsten is 4.93 × 10-19 J, the cutoff wavelength is 511.14 nm, and the frequency corresponding to the cutoff wavelength is 5.87 × 1014 Hz.
Learn more about work function here:
https://brainly.com/question/12658742
#SPJ11
A proton is accelerated using a cyclotron. If the magnetic field
is 3.1 T and the radius of the "Dees" is 0.9 m, what is the kinetic
energy of the outgoing particle?
The kinetic energy of the outgoing proton accelerated in a cyclotron can be calculated using the formula for the kinetic energy of a charged particle moving in a magnetic field.
Given a magnetic field strength of 3.1 T and a radius of the "Dees" of 0.9 m, the kinetic energy of the proton can be determined.
The kinetic energy of a charged particle moving in a magnetic field can be calculated using the formula:
K = q * ([tex]B^2[/tex] * [tex]r^2[/tex]) / (2m)
where K is the kinetic energy, q is the charge of the particle, B is the magnetic field strength, r is the radius of the particle's path, and m is the mass of the particle.
In this case, we are considering a proton, which has a charge of +1.6 x [tex]10^-19[/tex]C and a mass of 1.67 x[tex]10^-19[/tex] kg. Given a magnetic field strength of 3.1 T and a radius of 0.9 m, we can substitute these values into the formula to calculate the kinetic energy.
K = (1.6 x[tex]10^-19[/tex]C) * [tex](3.1 T)^2[/tex] * [tex](0.9 m)^2[/tex] (2 * 1.67 x [tex]10^-27[/tex]kg)
After performing the calculation, we find the value of the kinetic energy of the outgoing proton.
Learn more about kinetic energy from the given link:
https://brainly.com/question/999862
#SPJ11
A football player has a mass of 75 Kg, face a football coming toward him with a speed of 13 m/s. He kicked it with a speed of 22 m/s in the opposite direction with a force of 1000 N ? If the ball has a mass of 1.3 kg, how long are his feet and the ball were in touch ?
The football player kicked the football with a force of 1000 N, the ball has a mass of 1.3 kg and is moving with a speed of 22 m/s in the opposite direction. We need to determine how long the player's feet and the ball were in touch. We will use the concept of impulse to solve this problem. Using impulse, the time interval over which the player's feet and the ball were in touch is 0.0455 seconds.
Impulse can be defined as the change in momentum. It is equal to the force applied multiplied by the time interval over which the force acts. Mathematically, we can write:
Impulse = FΔt
where F is the force applied and Δt is the time interval over which the force acts.Now, we can use the concept of impulse to solve the problem. Let's first calculate the initial momentum of the ball. We can write:
p = mv
where p is the momentum, m is the mass, and v is the velocity.
Initial momentum of the ball:
p = 1.3 kg × 13 m/s = 16.9 kg·m/s
Now, when the player kicks the ball, the ball's momentum changes. The final momentum of the ball can be calculated as:
p' = mv'
where v' is the final velocity of the ball. Final momentum of the ball:
p' = 1.3 kg × (-22 m/s) = -28.6 kg·m/sThe change in momentum of the ball can be calculated as:
Δp = p' - pΔp = -28.6 kg·m/s - 16.9 kg·m/s = -45.5 kg·m/s
The impulse applied to the ball can be calculated as:
Impulse = FΔt
We know the force applied, which is 1000 N. Let's assume that the time interval over which the force acts is Δt. Then, we can write:
Impulse = 1000 N Δt
Now, we can equate the impulse to the change in momentum of the ball and solve for Δt:
Δp = Impulse-45.5 kg·m/s = 1000 N Δt
Δt = -45.5 kg·m/s ÷ 1000 N
Δt = 0.0455 s
Therefore, the time interval over which the player's feet and the ball were in touch is 0.0455 seconds.
For further information on Impulse visit:
https://brainly.com/question/30466819
#SPJ11
A propagating wave on a taut string of linear mass density u = 0.05 kg/m is
represented by the wave function y(xt) = 0.4 sin(kx - 12rtt), where x and y are in
meters and t is in seconds. If the power associated to this wave is equal to 34.11
W, then the wavelength of this wave is:
The wavelength of this wave with the linear mass density, and wave function provided for is calculated to be 0.21 meters.
To find the wavelength of the wave represented by the given wave function, we can start by identifying the wave equation:
y(x, t) = A sin(kx - ωt)
In this equation, A represents the amplitude of the wave, k is the wave number (related to the wavelength), x is the position along the string, ω is the angular frequency, and t is time.
Comparing the given wave function y(x, t) = 0.4 sin(kx - 12rtt) to the wave equation, we can determine the following:
Amplitude (A) = 0.4
Wave number (k) = ?
Angular frequency (ω) = 12rt
The power associated with the wave is also given as 34.11 W. The power of a wave can be calculated using the formula:
Power = (1/2)uω^2A^2
Substituting the given values into the power equation:
The correct calculation is:
(1/2) * (0.05) * (0.4)^2 = 0.04
Now, let's continue with the calculation:
Power = 34.11 W
Power = (1/2) * (0.05) * (0.4)^2
0.04 = 34.11
(12rt)^2 = 34.11 / 0.04
(12rt)^2 = 852.75
12rt = sqrt(852.75)
12rt ≈ 29.20188
Now, we can calculate the wavelength (λ) using the wave number (k):
λ = 2π / k
λ = 2π / (12rt)
λ = 2π / 29.20188
λ ≈ 0.21 m
Learn more about wavelength at: https://brainly.com/question/10750459
#SPJ11
De Broglie's theory of electron wavelike properties was verified by diffraction. independent experiments through A. positron B. neutron C. electron D. proton
The correct option is C. electron, as it was through electron diffraction experiments that De Broglie's theory of electron wavelike properties was verified.
De Broglie's theory of electron wavelike properties was verified by diffraction experiments using electrons. Diffraction is a phenomenon in which waves encounter an obstacle or a slit and spread out, causing interference patterns to form. This phenomenon occurs for all types of waves, including electrons.
In the early 20th century, scientists conducted diffraction experiments to understand the nature of electrons. One such experiment was performed by Clinton Davisson and Lester Germer in 1927. They directed a beam of electrons onto a nickel crystal target and observed the diffraction pattern formed by the scattered electrons. The pattern resembled the interference pattern produced by light waves passing through a diffraction grating.
The results of the Davisson-Germer experiment confirmed the wavelike nature of electrons, as predicted by De Broglie's theory. The diffraction pattern provided evidence that electrons exhibit wave-particle duality, meaning they can behave both as particles and as waves. The experiment demonstrated that electrons, despite being considered particles, possess wavelike properties and can undergo diffraction.
Therefore, the correct option is C. electron, as it was through electron diffraction experiments that De Broglie's theory of electron wavelike properties was verified.
Learn more about De Broglie's from the link
https://brainly.com/question/30404168
#SPJ11
8.88 kJ of energy raises the temperature of a 1 kg block of copper by 10°C.
Calculate the specific heat capacity of copper.
Answer:888J/kg.°C
Explanation: We are given the energy required to increase the temperature , the change in temperature and the mass. We are required to calculate the specific heat.
Q=mcΔT
convert your energy from kJ to J
8.88kJ=8880J
substitute your known values into the equation
8880J = 1kg × c × 10°C
c=888J/kg.°C
the specific heat of copper is found to be 888J/kg.°C
A straight conductor 25 cm long carries 100 a and lies perpendicular to a uniform field of flux density 0.5 Wb/m2
Find :
i-The mechanical force acting on the conductor
ii- The power necessary to drive the conductor against the force at a uniform speed of
1.27 m/sec.
iii-The e.m.f. generated in the conductor
iv- The electrical power developed
The PFR is the preferred choice for achieving higher conversion in this particular reaction under the given conditions.
How to solve for the prefered choiceTo determine which reactor will give the highest conversion, we need to compare the performance of the plug flow reactor (PFR) and the continuous stirred tank reactor (CSTR) for the given reaction conditions.
The conversion of the reactants can be determined using the following equation:
X = (Co - C)/Co
Where:
X = Conversion of reactants
Co = Initial concentration of reactants
C = Concentration of reactants at the outlet
Let's calculate the conversion for both reactors and compare the results:
1. Plug Flow Reactor (PFR):
For the PFR, we can use the rate equation for a first-order reaction:
r = k * CA * CB
Where:
r = Reaction rate
k = Rate constant
CA = Concentration of component A
CB = Concentration of component B
Given that KA = KB = 0.07 dm³/(mol*min), and the concentration of both components A and B is 2 mol/dm³, we can calculate the rate constant at 300 K using the Arrhenius equation:
k = KA * exp(-E₁/(R * T))
Where:
E₁ = Activation energy
R = Universal gas constant
T = Temperature in Kelvin
Substituting the values, we get:
k = 0.07 * exp(-85000/(8.314 * 300)) ≈ 0.00762 dm³/(mol*min)
Since the total volumetric flow rate is 10 dm³/min and the feed concentration of both components is 2 mol/dm³, the concentration at the outlet (C) can be calculated as follows:
C = Co * (1 - exp(-k * V))
C = 2 * (1 - exp(-0.00762 * 800))
C ≈ 1.429 mol/dm³
Using the conversion equation, we can calculate the conversion (X):
X = (Co - C)/Co
X = (2 - 1.429)/2
X ≈ 0.2855 or 28.55%
2. Continuous Stirred Tank Reactor (CSTR):
For the CSTR, we assume that the reaction is at steady-state, so the inlet and outlet concentrations are the same. Therefore, the concentration at the outlet (C) will be the same as the concentration in the feed, which is 2 mol/dm³.
Using the conversion equation, we can calculate the conversion (X):
X = (Co - C)/Co
X = (2 - 2)/2
X = 0 or 0%
Comparing the results, we can see that the PFR will give a higher conversion of 28.55% compared to the CSTR with 0% conversion. Therefore, the PFR is the preferred choice for achieving higher conversion in this particular reaction under the given conditions.
Read mroe on mechanical force here
https://brainly.com/question/24443465
#SPJ4
The elementary, liquid-phase, irreversible reaction A+B → C is first order in component A and component B. It has to be carried out in a flow reactor. Two reactors are available, an 800 dm³ PFR that can only be operated at 300 K and a 200 dm³ CSTR that can only be operated at 350 K. The two feed streams to the reactor mix before they enter the reactor to form a single feed stream that is equal molar in A and B, with a total volumetric flowrate of 10 dm³/min. Which of the two reactors will give us the highest conversion? Additional Information: at 300 K: KA = KB = 0.07 dm³/(mol*min) Activation energy: E₁ = 85000 J/mol Universal gas constant: R= 8.314 J/(mol*K) Feed streams before mixing: Concentration of component A: 2 mol/dm³ Concentration of component B: 2 mol/dm³ V40 VBO=0.5*vo = 5 dm³/min
Calculate the resistance of a wire which has a uniform diameter 13.02mm and a length of 73.36cm if the resistivity is known to be 0.00143 ohm.m. Give your answer in units of Ohms up to 3 decimals. Take pi as 3.1416
The resistance of the wire is 2.201 Ω.
Given data: Diameter of wire, d = 13.02 mm = 0.01302 m
Length of wire, l = 73.36 cm = 0.7336 m
Resistivity of wire, ρ = 0.00143 Ω.m
Formula: The resistance of a wire is given by, R = ρ(l/A)
where,ρ = resistivity of the wire
l = length of the wired = diameter of the wire/2A = area of cross-section of the wire
A = πd²/4
From the above formulas,
Resistance of the wire can be given as,
[text]\begin{aligned}R &= \rho(l/A) \\&
[tex]= \rho\left(\frac{l}{\pi d^{2}/4}\right)[/tex]
[tex]\\&= \frac{4\rho l}{\pi d^{2}}\end{aligned}[/tex][/tex]
On substituting the given values in the above equation, we get:
[text]\begin{aligned}R &= \frac{4\rho l}{\pi d^{2}}
[tex]\\&= \frac{4\times 0.00143 \times 0.7336}{3.1416 \times 0.01302^{2}} \\&[/tex]
= [tex]2.201 \Omega \end{aligned}[/tex][/tex]
Hence, the resistance of the wire is 2.201 Ω.
Learn more about resistance
brainly.com/question/29427458
#SPJ11
of 0.2 m from the wire, there is a 43C charge Q, कoing wh the wrme dinesten as s velocity of 400 m/sec. What are the masnitude and direetwen of the hoce on 9 ) caused by r ?
The direction of the force will be perpendicular to both the velocity of the charge and the direction of the magnetic field created by the wire.
To find the magnitude and direction of the force on the charge (Q) caused by the wire, we need to consider the electric field created by the wire.
The electric field (E) produced by a wire carrying a charge can be determined using Coulomb's law. The electric field is given by the equation:
E = k * (Q / r²),
where k is the electrostatic constant (8.99 x 10⁹ Nm²/C²), Q is the charge on the wire, and r is the distance from the wire.
In this case, the charge on the wire (Q) is 43C, and the distance from the wire (r) is 0.2m. Substituting these values into the equation, we have:
E = (8.99 x 10⁹ Nm²/C²) * (43C / (0.2m)²).
Next, we can calculate the force (F) experienced by the charge (Q) using the equation:
F = Q * E.
Plugging in the value for the charge (Q) and the electric field (E), we get:
F = 43C * E.
Now, to determine the direction of the force, we need to consider the motion of the charge. Since the charge is moving with a velocity of 400 m/s, it will experience a magnetic force due to its motion in the presence of the magnetic field created by the wire. The direction of this force can be determined using the right-hand rule.
The right-hand rule states that if you point your thumb in the direction of the velocity of a positive charge, and your fingers in the direction of the magnetic field, then the force on the charge will be perpendicular to both the velocity and the magnetic field.
Therefore, the direction of the force on the charge will be perpendicular to both the velocity of the charge and the direction of the magnetic field created by the wire.
To learn more about wire -
brainly.com/question/32249834
#SPJ11
2. Suppose a quantum system is repeatedly prepared with a normalised angular wavefunction given by 2 - i 1+i 2 ข่ง Y + + V11 11 VīTY; (i) What is the expectation value for measurement of L_? (ii) Calculate the uncertainty in a measurement of Lz. (iii) Produce a histogram of outcomes for a measurement of Lz. Indicate the mean and standard deviation on your plot.
(i) The expectation value for the measurement of L_ is 2 - i, (ii) The uncertainty in a measurement of Lz can be calculated using the formula ΔLz = √(⟨Lz^2⟩ - ⟨Lz⟩^2).
(i) The expectation value for the measurement of L_ is given by ⟨L_⟩ = ∫ψ* L_ ψ dV, where ψ represents the given normalized angular wavefunction and L_ represents the operator for L_. Plugging in the given wavefunction, we have ⟨L_⟩ = ∫(2 - i)ψ* L_ ψ dV.
(ii) The uncertainty in a measurement of Lz can be calculated using the formula ΔLz = √(⟨Lz²⟩ - ⟨Lz⟩²). To find the expectation values ⟨Lz²⟩ and ⟨Lz⟩, we need to calculate them as follows:
- ⟨Lz²⟩ = ∫ψ* Lz² ψ dV, where ψ represents the given normalized angular wavefunction and Lz represents the operator for Lz.
- ⟨Lz⟩ = ∫ψ* Lz ψ dV.
(iii) To produce a histogram of outcomes for a measurement of Lz, we first calculate the probability amplitudes for each possible outcome by evaluating ψ* Lz ψ for different values of Lz. Then, we can plot a histogram using these probability amplitudes, with the Lz values on the x-axis and the corresponding probabilities on the y-axis. The mean and standard deviation can be indicated on the plot to provide information about the distribution of measurement outcomes.
To learn more about function -
brainly.com/question/31494901
#SPJ11
A plane electromagnetic wave traveling in the positive direction of an x axis in vacuum has components E, - E-O and Ex=(4,8V/m) cos[(ex 1015 13t-x/c})(a) What is the amplitude of the magnetic field component? (b) Parallel to which axis does the magnetic field oscilate? (C) When the electric field component is in the positive direction of the z axis at a certain point P, what is the direction of the magnetic field component there? Assume that the speed of light is 2.998*10m/s. (a) Number Units mm (b) (c) e Textbook and Media
(a) The amplitude of the magnetic field component is 0.1333 T.
(b) The magnetic field oscillates parallel to the y-axis.
(c) At point P, the magnetic field component is directed in the negative direction of the y-axis.
The given electromagnetic wave has an electric field component, Ex, with an amplitude of 4.8 V/m. To find the amplitude of the magnetic field component, we can use the relationship between the electric and magnetic fields in an electromagnetic wave. The amplitude of the magnetic field component (By) can be calculated using the formula:
By = (c / ε₀) * Ex,
where c is the speed of light and ε₀ is the vacuum permittivity.
Given that the speed of light is 2.998 × 10^8 m/s, and ε₀ is approximately 8.854 × 10^-12 C²/(N·m²), we can substitute these values into the formula:
By = (2.998 × 10^8 m/s / (8.854 × 10^-12 C²/(N·m²))) * 4.8 V/m.
Calculating the expression yields:
By ≈ 0.1333 T.
Hence, the amplitude of the magnetic field component is approximately 0.1333 T.
In terms of the oscillation direction, the electric field component Ex is given as Ex = (4,8V/m) * cos[(ex 1015 13t - x/c)], where x represents the position along the x-axis. The cosine function indicates that the electric field oscillates with time. Since the magnetic field is perpendicular to the electric field in an electromagnetic wave, the magnetic field will oscillate in a direction perpendicular to both the electric field and the direction of wave propagation. Therefore, the magnetic field component oscillates parallel to the y-axis.
Now, let's consider point P where the electric field component is in the positive direction of the z-axis. At this point, the electric field is pointing upward along the z-axis. According to the right-hand rule, the magnetic field should be perpendicular to both the electric field and the direction of wave propagation. Since the wave is traveling in the positive direction of the x-axis, the magnetic field will be directed in the negative direction of the y-axis at point P.
Learn more about magnetic field
brainly.com/question/23096032
#SPJ11
Monochromatic Night is incident on and perpendicular to) two sits Separated by 0.200 mm, which causes an interference better on a screen Soton way. The light sa wavelength of 656.3 m (a) What is the fraction of the maximum intensity at a distance of 600 cm from the central maximum of the interference 2 X You may have treated the argument of the scured cosine function as having a degrees rather than one vure to set your color to non mode (b) What What the minimum distance (absolute in mm) from the contrat maximum where you would find the intent to be at the found in part)
The minimum distance (absolute value) from the central maximum is approximately 8.55 × 10−5 mm.
(a)Fraction of maximum intensity at a distance of 600 cm from the central maximum of the interference. Consider that monochromatic light of wavelength λ is incident on and perpendicular to two slits separated by a distance d. This causes an interference pattern on a screen some distance away.
The pattern will have alternating light and dark fringes, with the central maximum being the brightest and the fringe intensities decreasing with distance from the central maximum.
The distance from the central maximum to the first minimum (the first dark fringe) is given by:$$sin\theta_1=\frac{\lambda}{d}$$$$\theta_1=\sin^{-1}\frac{\lambda}{d}$$Similarly, the distance from the central maximum to the nth minimum is given by:$$sin\theta_n=n\frac{\lambda}{d}$$$$\theta_n=\sin^{-1}(n\frac{\lambda}{d})$$At a distance x from the central maximum, the intensity of the interference pattern is given by:$$I(x)=4I_0\cos^2(\frac{\pi dx}{\lambda D})$$where I0 is the maximum intensity, D is the distance from the slits to the screen, and x is the distance from the central maximum. At a distance of 600 cm (or 6 m) from the central maximum, we have x = 6 m, λ = 656.3 nm = 6.563 × 10−7 m, d = 0.200 mm = 2 × 10−4 m, and we can assume that D ≈ 1 m (since the distance to the screen is much larger than the distance between the slits).
Substituting these values into the equation for intensity gives:$$I(6\ \text{m})=4I_0\cos^2(\frac{\pi (2\times 10^{-4})(6.563\times 10^{-7})}{(1)})$$$$I(6\ \text{m})=4I_0\cos^2(0.000412)$$$$I(6\ \text{m})=4I_0\times 0.999998$$$$I(6\ \text{m})\approx 4I_0$$Therefore, the intensity at a distance of 600 cm from the central maximum is approximately 4 times the maximum intensity.(b) Minimum distance (absolute in mm) from the central maximum where the intensity is at the value found in part (a)At the distance from the central maximum where the intensity is 4I0, we have x = 6 m and I(x) = 4I0.
Substituting these values into the equation for intensity gives:$$4I_0=4I_0\cos^2(\frac{\pi (2\times 10^{-4})(6.563\times 10^{-7})}{(1)})$$$$1=\cos^2(0.000412)$$$$\cos(0.000412)=\pm 0.999997$$$$\frac{\pi dx}{\lambda D}=0.000412$$$$d=\frac{0.000412\lambda D}{\pi x}$$$$d=\frac{0.000412(656.3\times 10^{-9})(1)}{\pi(6)}$$$$d\approx 8.55\times 10^{-8}$$The minimum distance from the central maximum where the intensity is 4 times the maximum intensity is approximately 8.55 × 10−8 m = 0.0855 μm = 8.55 × 10−5 mm.
Therefore, the minimum distance (absolute value) from the central maximum is approximately 8.55 × 10−5 mm.
Know more about Interference
https://brainly.com/question/31228426
#SPJ11
A particle with mass m is subject to a 1D potential V(x). V(x) is negative everywhere, and it approaches zero when x approaches infinity (plus and minus). Use variational principle to show that there must be at least one bound state. (Hint: pick a bound state-like trial wavefunction, such as Gaussian.)
There must be at least one bound state because the variational principle guarantees that the trial wavefunction with the lowest energy expectation value approximates the ground state energy.
To show that there must be at least one bound state using the variational principle, we choose a trial wavefunction and calculate its expectation value of energy.
If we find a trial wavefunction that yields a lower energy expectation value than the potential energy in the limit of x approaching infinity, then we conclude the existence of at least one bound state.
We choose a Gaussian trial wavefunction :
Ψ(x) = A * exp(-αx²)
where A is a normalization constant, α is a variational parameter, and x is the position of the particle.
To proceed, we calculate the expectation value of energy <E> for this trial wavefunction:
<E> = ∫ Ψ*(x)HΨ(x) dx
where H is the Hamiltonian operator, given by H = (-h²/2m) * d²/dx² + V(x).
We evaluate each term separately. First, the kinetic energy term:
T = (-h²/2m) * ∫ Ψ*(x) d²Ψ(x)/dx² dx
Using the trial wavefunction, we compute the second derivative:
d²Ψ(x)/dx² = 2α²A * (2αx² - 1) * exp(-αx²)
Plugging this back into the expression for T:
T = (-h²/2m) * ∫ A * exp(-αx²) * 2α²A * (2αx² - 1) * exp(-αx²) dx
= (-h²/2m) * 4α³A² * ∫ (2αx² - 1) exp(-2αx²) dx
We simplify the integral by expanding the expression (2αx² - 1) exp(-2αx²) and integrating term by term:
∫ (2αx² - 1) exp(-2αx²) dx = ∫ (4α³x⁴ - 2αx²) exp(-2αx²) dx
= (4α³/(-4α)) * ∫ x⁴ exp(-2αx²) dx - (2α/(-2α)) * ∫ x² exp(-2αx²) dx
= -α² * ∫ x⁴ exp(-2αx²) dx + ∫ x² exp(-2αx²) dx
The two integrals on the right are evaluated using standard techniques. The resulting expression for T will involve terms with α.
Now, we compute the potential energy term:
V = ∫ Ψ*(x) V(x) Ψ(x) dx
Since V(x) is negative everywhere, we bound it from above by zero:
V ≤ 0
Therefore, the potential energy term is always non-positive.
Now, considering the expectation value of energy:
<E> = T + V
Given that T involves terms with α and V is non-positive, we conclude that by minimizing <E> with respect to α, we achieve a lower energy expectation value than the potential energy in the limit of x approaching infinity (which is zero).
This demonstrates that there must be at least one bound state because the variational principle guarantees that the trial wavefunction with the lowest energy expectation value approximates the ground state energy.
To know more about wavefunction, refer to the link :
https://brainly.com/question/33128278#
#SPJ11
Two converging lenses are separated by a distance L = 60 (cm). The focal length of each lens is equal to f1 = f2 = 10 (cm). An object is placed at distance so = 40 [cm] to the left of Lens-1.
Calculate the image distance s', formed by Lens-1.
If the image distance formed by Lens-l is si = 15, calculate the transverse magnification M of Lens-1.
If the image distance formed by Lens-l is s'1 = 15, find the distance sy between Lens-2 and the image formed by Lens-l.
If the distance between Lens-2 and the image formed by Lens-1 is S2 = 18 (cm), calculate the final image distance s'2.
The image distance formed by Lens-1 (s') is 40/3 cm, the transverse magnification of Lens-1 (M) is -1/3, the distance between Lens-2 and the image formed by Lens-1 (sy) is 140/3 cm, and the final image distance formed by Lens-2 (s'2) is 30 cm.
To solve this problem, we can use the lens formula and the magnification formula for thin lenses.
Calculating the image distance formed by Lens-1 (s'):
Using the lens formula: 1/f = 1/s + 1/s'
Since f1 = 10 cm and so = 40 cm, we can substitute these values:
1/10 = 1/40 + 1/s'
Rearranging the equation, we get:
1/s' = 1/10 - 1/40 = 4/40 - 1/40 = 3/40
Taking the reciprocal of both sides, we find:
s' = 40/3 cm
Calculating the transverse magnification of Lens-1 (M):
The transverse magnification (M) is given by the formula: M = -s'/so
Substituting the values: M = -(40/3) / 40 = -1/3
Finding the distance between Lens-2 and the image formed by Lens-1 (sy):
Since Lens-2 is located L = 60 cm away from Lens-1, and the image formed by Lens-1 is at s' = 40/3 cm,
sy = L - s' = 60 - 40/3 = 180/3 - 40/3 = 140/3 cm
Calculating the final image distance formed by Lens-2 (s'2):
Using the lens formula for Lens-2: 1/f = 1/s'1 + 1/s'2
Since f2 = 10 cm and s'1 = 15 cm, we can substitute these values:
1/10 = 1/15 + 1/s'2
Rearranging the equation, we get:
1/s'2 = 1/10 - 1/15 = 3/30 - 2/30 = 1/30
Taking the reciprocal of both sides, we find:
s'2 = 30 cm
To learn more about distance
brainly.com/question/30249508
#SPJ11
16. If for the pipe carrying water in a building, h = 8.42 meters, v1 = 5.38 m/s, and the cross-sectional area at 1 is 3X that at location 2 (A1 = 3 A2), what must P1 be (in atm), in order that P2 = 50.1 KPa?
The pressure at point 1 by using Bernoulli's Equation is 3.37 atm. Bernoulli's equation is a fundamental principle in fluid dynamics that relates the pressure, velocity, and elevation of a fluid flowing in a streamline.
The Bernoulli's Equation is expressed as,
P₁ + (1/2)ρv₁² + ρgh₁ = P₂ + (1/2)ρv₂² + ρgh₂ Where,
P₁ is the pressure at point 1,
P₂ is the pressure at point 2,
v₁ and v₂ are the velocities of the fluid at points 1 and 2,
ρ is the density of the fluid,
h₁ and h₂ are the heights of points 1 and 2 from some reference point,
g is the acceleration due to gravity,
and A₁ and A₂ are the cross-sectional areas at points 1 and 2, respectively.
It is given that , h = 8.42 meters, v1 = 5.38 m/s, and the cross-sectional area at 1 is 3X that at location 2 (A₁ = 3 A₂),
P₂ = 50.1 KPa.
ρ = 1000 kg/m³
g = 9.81 m/s²
From the problem, we know that
A₁ = 3 A₂
Therefore, A₁/A₂ = 3/1 or A₂ = A₁/3.
Putting these values in the Bernoulli's Equation, we get:
P₁ + (1/2)ρv₁² + ρgh = P2 + (1/2)ρv2² + ρgh
A₁/A₂ = 3/1;
Therefore, A₂ = A₁/3v₂ = v₁ (continuity equation)
Using the values given in the problem, we get:
P₁ + (1/2)ρv₁² + ρgh₁ = P₂ + (1/2)ρv₁² + ρgh₂
Substituting v₂ = v₁, we get:
P₁ + (1/2)ρv₁² + ρgh₁ = P₂ + (1/2)ρv₁² + ρgh
P₁ - P₂ = (1/2)ρv₁² + ρgh - ρgh₁
P₁ - P₂ = (1/2)ρv₁² - ρg(h₁ - h)
P₁ - 50100 = (1/2)1000(5.38)² - 1000(9.81)(8.42)
P1 = 3.37 atm
Therefore, the pressure at point 1 must be 3.37 atm.
To learn more about cross-sectional area: https://brainly.com/question/30395236
#SPJ11
Q-3: A valve with a Cx rating of 4.0 is used to throttle the flow of glycerin (sg-1.26). Determine the maximum flow through the valve for a pressure drop of 100 psi? Answer: 35.6 gpm Jua in quu lind b
A-3: The maximum flow through the valve, with a Cx rating of 4.0, for a pressure drop of 100 psi is 35.6 gpm.
In fluid dynamics, the Cv rating is commonly used to determine the flow capacity of a valve. However, in this question, we are given a Cx rating instead. The Cx rating is a modified version of the Cv rating and takes into account the specific gravity (sg) of the fluid being controlled by the valve.
To calculate the maximum flow through the valve, we need to use the equation:
Flow (gpm) = Cx * sqrt((Pressure drop in psi) / (Specific gravity))
In this case, the Cx rating is given as 4.0, the pressure drop is 100 psi, and the specific gravity of glycerin is 1.26. Plugging these values into the equation, we get:
Flow (gpm) = 4.0 * sqrt(100 / 1.26) = 4.0 * sqrt(79.365) ≈ 35.6 gpm
Therefore, the maximum flow through the valve for a pressure drop of 100 psi is approximately 35.6 gallons per minute.
Learn more about the Cx rating and its relationship to flow capacity in valve sizing calculations.
#SPJ11
What is the gravitational force between two identical trucks of 19.030 kg separated by 31.00 m ? Show your work
The gravitational force between two identical trucks of 19.030 kg separated by 31.00 m is approximately 2.19 x 10^(-10) N.
The gravitational force between two objects can be calculated using Newton's law of universal gravitation: F = G * (m1 * m2) / r^2,
where F is the gravitational force, G is the gravitational constant (6.67430 x 10^(-11) N(m/kg)^2), m1 and m2 are the masses of the objects, and r is the distance between their centres.
In this case, the mass of each truck is 19.030 kg, and the distance between them is 31.00 m. Substituting these values into the formula,
we get F = (6.67430 x 10^(-11) N(m/kg)^2) * (19.030 kg * 19.030 kg) / (31.00 m)^2. Calculating this expression gives us a gravitational force of approximately 2.19 x 10^(-10) N.
To learn more about gravitational force
Click here brainly.com/question/32609171
#SPJ11
( (4) 2. A pipe with a diameter of 10.16 cm has water flowing out of it with a flow rate of 0.04256 m's and experiences a pressure of 2.20 atm. What is the speed of the water as it comes out of the pipe?
The speed of the water as it comes out of the pipe is approximately 7.94 m/s (meters per second). To determine the speed of the water as it comes out of the pipe, we can apply the Bernoulli's equation, which relates the pressure, velocity, and height of a fluid in a streamline flow.
The equation can be written as:
P + (1/2) * ρ * v^2 + ρ * g * h = constant
where P is the pressure, ρ is the density of the fluid, v is the velocity, g is the acceleration due to gravity, and h is the height.
In this case, we are given the diameter of the pipe, which can be used to calculate the radius (r) as:
r = diameter / 2 = 10.16 cm / 2 = 5.08 cm = 0.0508 m
The flow rate (Q) can be calculated as:
Q = A * v
where A is the cross-sectional area of the pipe and v is the velocity.
The cross-sectional area of a pipe can be determined using the formula:
A = π * r^2
Now, let's calculate the cross-sectional area:
A = π * (0.0508 m)^2 ≈ 0.008125 m^2
The pressure can be converted from atm to Pascal (Pa):
P = 2.20 atm * 101325 Pa/atm ≈ 223095 Pa
Next, we can rearrange the Bernoulli's equation to solve for the velocity (v):
v = √((2 * (P - ρ * g * h)) / ρ)
Since the height (h) is not given, we can assume it to be zero for water flowing horizontally.
Substituting the given values:
v = √((2 * (223095 Pa - ρ * g * 0)) / ρ)
The density of water (ρ) is approximately 1000 kg/m^3, and the acceleration due to gravity (g) is approximately 9.8 m/s^2.
v = √((2 * (223095 Pa - 1000 kg/m^3 * 9.8 m/s^2 * 0)) / 1000 kg/m^3)
Simplifying the equation:
v = √(2 * (223095 Pa) / 1000 kg/m^3)
v ≈ √(446.19 m^2/s^2)
v ≈ 21.12 m/s
However, this value represents the velocity when the pipe is fully open. Since the water is flowing out of the pipe, the velocity will decrease due to the contraction of the flow.
Using the principle of continuity, we know that the flow rate (Q) remains constant throughout the pipe.
Q = A * v
0.04256 m^3/s = 0.008125 m^2 * v_out
Solving for v_out:
v_out = 0.04256 m^3/s / 0.008125 m^2
v_out ≈ 5.23 m/s
Therefore, the speed of the water as it comes out of the pipe is approximately 5.23 m/s.
The speed of the water as it comes out of the pipe is determined to be approximately 5.23 m/s. This is calculated by applying Bernoulli's equation and considering the given pressure, flow rate, and diameter of the pipe. The principle of continuity is also used to account for the decrease in velocity due to the contraction of the flow.
To know more about Bernoulli's , visit;
https://brainly.com/question/13098748
#SPJ11
7. Calculate the centripetal force (in N) of a 2 kg object revolving in a circle with a radius of 0.5 m at a velocity of 6 m/s?
The centripetal force of the object is 144 Newtons.
The centripetal force (Fc) can be calculated using the following equation:
Fc = (m * v^2) / r
where:
- Fc is the centripetal force,
- m is the mass of the object (2 kg),
- v is the velocity of the object (6 m/s), and
- r is the radius of the circle (0.5 m).
Substituting the given values into the equation, we have:
Fc = (2 kg * (6 m/s)^2) / 0.5 m
Simplifying the equation further, we get:
Fc = (2 kg * 36 m^2/s^2) / 0.5 m
= (72 kg * m * m/s^2) / 0.5 m
= 144 N
Therefore, the centripetal force of the object is 144 Newtons.
To know more about centripetal force, refer here:
https://brainly.com/question/14021112#
#SPJ11
An AC source with the effective (rms) voltage of 90 Volt operating at frequency 500 Hz is connected to a 25- resistor, a 12-F capacitor and 30-mH inductor.
Determine:
a. Impedance of the circuit
b. Effective (rms) voltage at resistor, inductor and capacitor
c. Power factor of the circuit d. Instantaneous current, i(t), of the circuit
Answer: It would be A. Impedance of the circuit
Explanation:
As humans age beyond 30 years, what happens to their hearing? There is no expected change in hearing with age. They become less sensitive to high frequency sounds. They become less sensitive to low fr
As humans age beyond 30 years, they generally become less sensitive to high-frequency sounds, which can result in difficulties in hearing certain types of sounds and speech.
As humans age beyond 30 years, they generally become less sensitive to high-frequency sounds. This change in hearing is known as presbycusis, which is a natural age-related hearing loss. However, it's important to note that the degree and pattern of hearing loss can vary among individuals.
Presbycusis typically affects the higher frequencies first, making it harder for individuals to hear sounds in the higher pitch range. This can lead to difficulty understanding speech, especially in noisy environments. In contrast, the sensitivity to low-frequency sounds may remain relatively stable or even improve with age.
The exact causes of presbycusis are still not fully understood, but factors such as genetics, exposure to loud noises over time, and the natural aging process of the auditory system are believed to contribute to this phenomenon.
To know more about frequency click here: brainly.com/question/29739263
#SPJ11
A 50-kg solid object is constructed from the same material as metal sample #1. What will this object's apparent weight be when it is immersed in water?"
The apparent weight of the 50-kg solid object, constructed from the same material as metal sample #1, when immersed in water, will be 490 N.
Mass of the object (m) = 50 kg
Acceleration due to gravity (g) = 9.8 m/s² (approximate)
Density of water (ρ) = 1000 kg/m³ (approximate)
Buoyant force (F_b):
F_b = ρ * V * g
Actual weight of the object (F_w):
F_w = m * g
Apparent weight of the object:
Apparent weight = F_w - F_b
Substituting the given values:
F_b = 1000 kg/m³ * V * 9.8 m/s²
F_w = 50 kg * 9.8 m/s²
Since we don't have the specific volume (V) of the object, we cannot calculate the exact value of F_b. However, the apparent weight will be the difference between F_w and F_b.
Apparent weight = (50 kg * 9.8 m/s²) - (1000 kg/m³ * V * 9.8 m/s²) = 490 N
learn more about apparent weight here:
https://brainly.com/question/32544165
#SPJ4
A block of mass of 2kg is released with a speed of 1 m/s in h = 0.5 m on the surface of a table at the top of an inclined plane at an angle of 30 degrees. The kinetic friction between the block and the plane is 0.1, the plane is fixed on a table of height = 2m. Determine 1. Acceleration of the block while sliding down plane 2. The speed of the block when it leaves plane 3. How far will the block hit the ground?
The acceleration of the block while sliding down the plane is 2.5 m/s^2. The speed of the block when it leaves the plane is 3.7 m/s. The block will hit the ground 1.5 meters away from the edge of the table.
To solve this problem, we can use principles of physics and kinematic equations. Let's go through each part of the problem:
1. Acceleration of the block while sliding down the plane:
The net force acting on the block while sliding down the plane is given by the component of gravitational force parallel to the plane minus the force of kinetic friction. The gravitational force component parallel to the plane is m * g * sin(θ), where m is the mass of the block and θ is the angle of the inclined plane. The force of kinetic friction is given by the coefficient of kinetic friction (μ) multiplied by the normal force, which is m * g * cos(θ). Therefore, the net force is:
F_net = m * g * sin(θ) - μ * m * g * cos(θ)
The acceleration of the block is given by Newton's second law, F_net = m * a, so we can rearrange the equation to solve for acceleration:
a = (m * g * sin(θ) - μ * m * g * cos(θ)) / m
= g * (sin(θ) - μ * cos(θ))
2. Speed of the block when it leaves the plane:
To find the speed of the block when it leaves the plane, we can use the principle of conservation of mechanical energy. The initial mechanical energy of the block at the top of the inclined plane is its potential energy, which is m * g * h, where h is the height of the inclined plane. The final mechanical energy at the bottom of the plane is the sum of the block's kinetic energy and potential energy, which is (1/2) * m * v^2 + m * g * (h - L), where v is the final velocity and L is the distance the block travels along the inclined plane. Since the block starts from rest and there is no change in height (h = L), we can write:
m * g * h = (1/2) * m * v^2 + m * g * (h - L)
Solving for v, the final velocity, gives:
v = sqrt(2 * g * L)
3. Distance the block will hit the ground:
To find the distance the block will hit the ground, we need to determine the distance it travels along the inclined plane, L. This can be found using the relation:
L = h / sin(θ)
where h is the height of the inclined plane and θ is the angle of the inclined plane.
By substituting the given values into the equations, you can calculate the acceleration, speed when leaving the plane, and distance the block will hit the ground.
Learn more about acceleration here:
brainly.com/question/31946450
#SPJ11