1. The speed of the skier when reaching the bottom of the ski trail is approximately 38 m/s.
2.The work done on the student by the force of gravity when she is 5.3 m above the trampoline is 2597 J.
3.The total work done by the boy and girl together is approximately 2100 J.
4.The initial kinetic energy of the arrow is KE_arrow = (1/2) * 0.050 kg * (33.33).
To calculate the speed of the skier at the bottom of the ski trail, we can use the principle of conservation of energy. Since the ski trail is frictionless, the initial potential energy at the top of the trail is converted entirely into kinetic energy at the bottom.
1.The potential energy at the top is given by mgh, where m is the mass of the skier, g is the acceleration due to gravity, and h is the height of the trail. So, potential energy = 110 kg * 9.8 m/s^2 * 100 m = 107,800 J.Since there is no energy loss, this potential energy is converted into kinetic energy at the bottom: (1/2)mv^2, where v is the velocity of the skier at the bottom.
Setting potential energy equal to kinetic energy, we have 107,800 J = (1/2) * 110 kg * v^2. Solving for v, we find v ≈ 38 m/s.Therefore, the speed of the skier when reaching the bottom of the ski trail is approximately 38 m/s.
2.The work done by the force of gravity on the student can be calculated using the formula W = mgh, where m is the mass, g is the acceleration due to gravity, and h is the height.Given that the student's mass is 50 kg, the height is 5.3 m, and the acceleration due to gravity is approximately 9.8 m/s^2, we can calculate the work done: W = 50 kg * 9.8 m/s^2 * 5.3 m = 2597 J.
Therefore, the work done on the student by the force of gravity when she is 5.3 m above the trampoline is 2597 J.
3.To calculate the total work done by the boy and girl together, we need to determine the individual work done by each person and then add them up.The work done by a force can be calculated using the formula W = Fd cosθ, where F is the force, d is the displacement, and θ is the angle between the force and the displacement.
For the boy, the force is 50 N, the displacement is 15 m, and the angle is 52°. So, the work done by the boy is W_boy = 50 N * 15 m * cos(52°) ≈ 1098 J.For the girl, the force is also 50 N, the displacement is 15 m, and the angle is 32°. So, the work done by the girl is W_girl = 50 N * 15 m * cos(32°) ≈ 1000 J.
Adding the two work values together, we get the total work done: Total work = W_boy + W_girl ≈ 1098 J + 1000 J = 2098 J ≈ 2100 J.Therefore, the total work done by the boy and girl together is approximately 2100 J.
4.The kinetic energy of an object is given by the formula KE = (1/2)mv^2, where m is the mass and v is the velocity.Given that the mass of the arrow is 0.050 kg and the speed is 120 km/h, we need to convert the speed to meters per second: 120 km/h = (120 * 1000 m) / (3600 s) ≈ 33.33 m/s.The initial kinetic energy of the arrow is KE_arrow = (1/2) * 0.050 kg * (33.33
To know more about skier refer here:
https://brainly.com/question/14031008#
#SPJ11
The tension in a ligament in the human knee is approximately proportional to the extension of the ligament, if the extension is not too
large. If a particular ligament has an
effective spring constant of 159 N/mm as it is stretched, what is the tension in this ligament when it is
stretched by 0.720 cm?
The pressure in a ligament in the mortal knee is roughly commensurable to the extension of the ligament if the extension isn't toolarge.However, the pressure in this ligament when it's stretched by 0, If a particular ligament has an effective spring constant of 159 N/ mm as it's stretched.720 cm is 115.68N.
Hooke's law is a law that states that the force F demanded to extend or compress a spring by some distance X scales linearly with respect to that distance.
That's F = kx Where F is the force applied, k is the spring constant, and x is the extension or contraction of the spring. Pressure is defined as the force transmitted through a rope, string, line, or any other analogous object when it's pulled tense by forces acting on its ends. Pressure, like any other force, can be represented in newtons( N).
For this problem, the extension x = 0.720 cm = 0.0720 cm = 0.0720/ 10 = 0.00720 m, and the spring constant k = 159 N/ mm = 159 N/ 1000 mm = 0.159 N/ mm = 0.159 N/m.
Using Hooke's law F = kx = (0.159 N/ m) ×(0.00720 m) = 0.001145 N ≈115.68N.
The tension in the ligament when itstretched by 0.720 cm is 115.68N.
#SPJ11
Learn more about spring constant and tension https://brainly.com/question/14670501
Two empty soda cans are placed upright on a frictionless table, where the cans are separated by several centimetres. Predict the motions of the cans when you blow air through
the gap between the cans using a straw. Explain this in 80 words.
When air is blown through the gap between the two upright soda cans using a straw, the cans will move away from each other. This is due to the principle of action and reaction.
The air blown through the gap creates a stream of fast-moving air molecules that exert a force on the inner surfaces of the cans. According to Newton's third law of motion, the cans will experience an equal and opposite force, causing them to move in opposite directions away from each other.
To know more about Newton's third law of motion refer here
https://brainly.com/question/974124#
#SPJ11
It is weigh-in time for the local under 85 kg rugby team. The bathroom scale that is used to assess eligibility can be described by Hooke's law, which is depressed 0.63 cm for its maximum load of 115 kg. What is the scale's effective spring constant k?
The effective spring constant of the bathroom scale is 179,048.7 N/m.
Maximum load = 115 kgDepression = 0.63 cmSpring constant = k. The force applied on the bathroom scale is directly proportional to the depression it undergoes. This concept is called Hooke's law, and it can be expressed as:F = -kxwhere,F = Force appliedk = Spring constantx = Displacement of the springLet x = 0 when F = 0. The negative sign indicates that the force is in the opposite direction of the displacement. The formula for finding the spring constant k of a bathroom scale using Hooke's law is shown below: k = -F/xHere, F = (Maximum load) × (Gravity) F = (115 kg) × (9.8 m/s²) F = 1127 NThe distance of depression, x = 0.63 cm = 0.0063 mTherefore, the spring constant of the bathroom scale is given by:k = -F/xk = -(1127 N)/(0.0063 m)k = -179,048.7 N/mHowever, we have to take the absolute value of the answer because the spring constant can never be negative.k = 179,048.7 N/m. The effective spring constant of the bathroom scale is 179,048.7 N/m.
Learn more about spring constant:
https://brainly.com/question/14159361
#SPJ11
Consider two objects of masses m₁= 8.775 kg and m₂ = 4.944 kg. The first mass (m₂) is traveling along the negative y-axis at 48.38 km/hr and strikes the second stationary mass m₂, locking the two masses together. What is the velocity of the first mass before the collision? What is the velocity of the second mass before the collision? What is the final velocity of the two masses? What is the total initial kinetic energy of the two masses? What is the total final kinetic energy of the two masses? How much of the mechanical energy is lost due to this collision?
The initial velocity of the second mass (m₂) is 0 as it is stationary. To find the initial velocity of the first mass (m₁), we will use the equation for kinetic energy.Kinetic energy = 1/2 mv²where m is the mass of the object and v is its velocity.
The kinetic energy of the first mass can be found by converting its velocity from km/hr to m/s.Kinetic energy = 1/2 (8.775 kg) (48.38 km/hr)² = 1/2 (8.775 kg) (13.44 m/s)² = 797.54 JSo the total initial kinetic energy of the two masses is the sum of the kinetic energies of the individual masses: 797.54 J + 0 J = 797.54 JThe final velocity of the two masses can be found using the law of conservation of momentum.
According to the law of conservation of momentum, the momentum before the collision is equal to the momentum after the collision.m₁v₁ + m₂v₂ = (m₁ + m₂)vfwhere m₁ is the mass of the first object, v₁ is its velocity before the collision, m₂ is the mass of the second object, v₂ is its velocity before the collision, vf is the final velocity of both objects after the collision.
Since the second mass is stationary before the collision, its velocity is 0.m₁v₁ = (m₁ + m₂)vf - m₂v₂Substituting the given values in the above equation and solving for v₁, we get:v₁ = [(m₁ + m₂)vf - m₂v₂]/m₁= [(8.775 kg + 4.944 kg)(0 m/s) - 4.944 kg (0 m/s)]/8.775 kg = 0 m/sSo the initial velocity of the first mass is 0 m/s.
The momentum of the system after the collision is:momentum = (m₁ + m₂)vfThe total final kinetic energy of the system can be found using the equation:final kinetic energy = 1/2 (m₁ + m₂) vf²Substituting the given values in the above equation, we get:final kinetic energy = 1/2 (8.775 kg + 4.944 kg) (0.9707 m/s)² = 25.28 JThe mechanical energy lost due to this collision is the difference between the initial kinetic energy and the final kinetic energy:energy lost = 797.54 J - 25.28 J = 772.26 JThus, the mechanical energy lost due to this collision is 772.26 J.
Initial velocity of the first mass = 0 m/sInitial velocity of the second mass = 0 m/sFinal velocity of the two masses = 0.9707 m/sTotal initial kinetic energy of the two masses = 797.54 JTotal final kinetic energy of the two masses = 25.28 JEnergy lost due to this collision = 772.26 J.
To know about velocity visit:
https://brainly.com/question/30559316
#SPJ11
A resistor R = 5 ohm, an inductor L = 3mH and a capacitor C = 30x10^(-6) F are connected in series to an AC source running at 60 Hz. the rms voltage is measured across E component and found to be:
Vr = 50V, VL = 20V, Vc = 10V
What is the rms voltage of the ac source?
Suppose that the frequency of the source is timed such that the circuit is at resonance. What is the average power drawn?
At resonance, the average power drawn is determined by considering the phase relationships and using the formula P = VIcos(θ).
In a series circuit consisting of a resistor, inductor, capacitor, and an AC source, the rms voltage across each component is given: Vr = 50V for the resistor, VL = 20V for the inductor, and Vc = 10V for the capacitor.
To determine the rms voltage of the AC source, we need to find the vector sum of the voltage drops across each component. At resonance, the impedance of the circuit is purely resistive, resulting in the minimum impedance. To calculate the average power drawn at resonance,
we need to consider the phase relationships between voltage and current in each component and use the formula P = VIcos(θ).
In a series circuit, the total rms voltage (V) across the components is the vector sum of the individual voltage drops. Using the given values, we can calculate the rms voltage of the AC source by finding the square root of the sum of the squares of the component voltages: V = sqrt(Vr^2 + VL^2 + Vc^2).
To determine the average power drawn at resonance, we need to consider the phase relationships between voltage and current. At resonance, the inductive and capacitive reactances cancel each other, resulting in a purely resistive impedance.
The current is in phase with the voltage across the resistor, and the power is given by P = VIcos(θ), where θ is the phase angle between voltage and current.
Since the resistor is purely resistive, the phase angle is 0 degrees, and the power factor (cos(θ)) is equal to 1. Therefore, the average power drawn at resonance is P = Vr * Ir,
where Ir is the rms current flowing through the circuit. The rms current can be calculated by dividing the rms voltage of the AC source by the total impedance of the circuit, which is the sum of the resistive, inductive, and capacitive components.
In conclusion, to find the rms voltage of the AC source, calculate the vector sum of the voltage drops across each component. At resonance, the average power drawn is determined by considering the phase relationships and using the formula P = VIcos(θ).
learn more about rms voltage here:
brainly.com/question/13507291
#SPJ11
(hrwc10p72_6e) The linear momentum of a 1350 kg car increased by 6.50×10³ kg m/s in 13.0 s. What is the magnitude of the constant force that accelerated the car? Submit Answer Tries 0/8 By how much did the speed of the car increase? Submit Answer Tries 0/7
The magnitude of the constant force that accelerated the car can be calculated using the formula for linear momentum. The calculated force is 5.00 × 10^2 N. The increase in speed of the car can be determined by dividing the change in momentum by the mass of the car. The calculated increase in speed is 4.81 m/s.
The linear momentum (p) of an object is given by the formula p = mv, where m is the mass of the object and v is its velocity.
In this case, the car has a mass of 1350 kg and its linear momentum increased by 6.50 × 10³ kg m/s in a time interval of 13.0 s.
To find the magnitude of the force that accelerated the car, we use the formula F = Δp/Δt, where Δp is the change in momentum and Δt is the change in time.
Substituting the given values, we have F = (6.50 × 10³ kg m/s)/(13.0 s) = 5.00 × 10^2 N.
Therefore, the magnitude of the constant force that accelerated the car is 5.00 × 10^2 N.
To determine the increase in speed of the car, we divide the change in momentum by the mass of the car. The change in speed (Δv) is given by Δv = Δp/m.
Substituting the values, we have Δv = (6.50 × 10³ kg m/s)/(1350 kg) = 4.81 m/s.
Hence, the speed of the car increased by 4.81 m/s.
Learn more about linear momentum here:
https://brainly.com/question/30767107
#SPJ11
Identify the statements which could be tested by an objective experiment or observation. -People with green eyes are on average taller than people with blue eyes. -Daily meditation lowers blood pressure. -Somewhere in the universe there is an alien civilization of bird-like beings that have achieved interstellar space travel. -The best candies are made of chocolate. God allows civilizations to collapse when he becomes displeased with them. -The stock market performs better in months when the number of sunspots on the Sun's surface increase. -The most athletic individuals have an astrological sign of Capricorn, Aquarius, Pisces, Cancer or Leo. Asteroid A has 4.0 times the mass and 1.5 times the velocity of Asteroid B. If Asteroid B has a kinetic energy of 2,900,000 J then what is the kinetic energy of Asteroid A?
The statements that could be tested by an objective experiment or observation are "people with green eyes are on average taller than people with blue eyes", "daily meditation lowers blood pressure", and "the stock market performs better in months when the number of sunspots on the Sun's surface increase". The kinetic energy of Asteroid A is 4.5 J.
These statements lend themselves to empirical investigation through data collection, statistical analysis, and observation. By conducting controlled experiments, collecting relevant data, and analyzing the results, researchers can provide objective evidence to support or refute these claims.
The kinetic energy of Asteroid A is calculated by using the formula for kinetic energy:
Kinetic energy (KE) = (1/2) * mass * velocity^2
Mass of Asteroid B (mB) = 1
Velocity of Asteroid B (vB) = 1
Kinetic energy of Asteroid B (KEB) = 2,900,000 J
Mass of Asteroid A (mA) = 4.0 * mB = 4.0
Velocity of Asteroid A (vA) = 1.5 * vB = 1.5
Substituting the values into the formula:
KEA = (1/2) * mA * vA^2
= (1/2) * 4.0 * (1.5)^2
= (1/2) * 4.0 * 2.25
= 4.5 J
Therefore, the kinetic energy of Asteroid A is 4.5 J.
To know more about kinetic energy, refer to the link :
https://brainly.com/question/22174271#
#SPJ11
Find the total surface area of the washer, rounded to one
decimal place, for x = 14 mm and y = 24 mm. Hint: Think of the
washer as a cylinder through which a hole has been drilled.
The total surface area of the washer, considering the outer and inner cylinders, is approximately 1051.4 mm². The outer cylinder contributes to the surface area while the inner cylinder, representing the hole, does not affect it.
To find the total surface area of the washer, we need to calculate the surface area of the outer cylinder and subtract the surface area of the inner cylinder.
The surface area of a cylinder is given by the formula:
[tex]A_{cylinder[/tex]= 2πrh
where r is the radius of the cylinder's base and h is the height of the cylinder.
In this case, the washer can be seen as a cylinder with a hole drilled through it, so we need to calculate the surface areas of both the outer and inner cylinders.
Let's calculate the total surface area of the washer:
Calculate the surface area of the outer cylinder:
Given x = 14 mm, the radius of the outer cylinder ( [tex]r_{outer[/tex] ) is half of x, so [tex]r_{outer[/tex] = x/2 = 14/2 = 7 mm.
The height of the outer cylinder ([tex]h_{outer[/tex]) is y = 24 mm.
[tex]A_{outer_{cylinder[/tex] = 2π [tex]r_{outer[/tex][tex]h_{outer[/tex] = 2π(7)(24) ≈ 1051.4 mm² (rounded to one decimal place).
Calculate the surface area of the inner cylinder:
Given the inner radius (r_inner) is 7 mm less than the outer radius, so r_inner = r_outer - 7 = 7 - 7 = 0 mm (since the inner hole has no radius).
The height of the inner cylinder ([tex]h_{inner[/tex]) is the same as the outer cylinder, y = 24 mm.
[tex]A_{inner_{cylinder[/tex] = 2π [tex]r_{inner[/tex] [tex]h_{inner[/tex] = 2π(0)(24) = 0 mm².
Subtract the surface area of the inner cylinder from the surface area of the outer cylinder to get the total surface area of the washer:
Total surface area = [tex]A_{outer_{cylinder[/tex] - [tex]A_{inner_{cylinder[/tex] = 1051.4 - 0 = 1051.4 mm².
Therefore, the total surface area of the washer, rounded to one decimal place, is approximately 1051.4 mm².
Learn more about Surface area
brainly.com/question/29298005
#SPJ11
Two insulated current-carrying wires (wire 1 and wire 2) are bound together with wire ties to form a two-wire unit. The wires are 2.71 m long and are stretched out horizontally parallel to each other. Wire 1 carries a current of I₁ = 8.00 A and the other wire carries a current I2 in the opposite direction. The two-wire unit is placed in a uniform magnetic field of magnitude 0.400 T such that the angle between the direction of I₁ and the magnetic field is 75.0°. While we don't know the current in wire 2, we do know that it is smaller than the current in wire 1. If the magnitude of the net force experienced by the two-wire unit is 3.50 N, determine the current in wire 2.
The current in wire 2 is -0.938 A. It is smaller than the current in wire 1, the absolute value of the current in wire 2 is 0.938 A.
The net force experienced by a current-carrying wire in a magnetic field:
F = I × L × B × sin(θ)
where F is the net force, I is the current, L is the length of the wire, B is the magnetic field strength, and θ is the angle between the current and the magnetic field.
Given:
Length of the wires L = 2.71 m
Current in wire 1 I₁ = 8.00 A
The magnitude of the magnetic field B = 0.400 T
The angle between the current and the magnetic field θ = 75.0°
Net force F = 3.50 N
F = I₁ × L × B × sin(θ) + I₂ × L × B × sin(θ)
3.50 = (8.00) × (2.71 ) × (0.400) × sin(75.0°) + I₂ × (2.71) × (0.400) × sin(75.0°)
I₂ = (3.50 - 8.00 × 2.71 × 0.400 × sin(75.0°)) / (2.71 × 0.400 × sin(75.0°))
I₂ = -0.938 A
The current in wire 2 is -0.938 A. Since we know it is smaller than the current in wire 1, we can consider it positive and take the absolute value:
I₂ = 0.938 A
Therefore, the current in wire 2 is approximately 0.938 A.
To know more about the current carrying wire:
https://brainly.com/question/14327310
#SPJ4
Problem#14(Please Show Work 30 points) (a) A pendulum is set up so that its bob (a thin copper disk) swings between the poles of a permanent magnet as shown in Figure 22.63. What is the magnitude and direction of the magnetic force on the bob at the lowest point in its path, if it has a positive 0.250 μC charge and is released from a height of 40.0 cm above its lowest point? The magnetic field strength is 2.50 T. (b) What is the acceleration of the bob at the bottom of its swing if its mass is 35.0 grams and it is hung from a flexible string? Be certain to include a free-body diagram as part of your analysis.
(a) To find the magnitude and direction of the magnetic force on the bob of the pendulum at the lowest point in its path, we can use the equation for the magnetic force on a charged particle moving through a magnetic field:
F = qvB sinθ
where F is the magnetic force, q is the charge of the particle, v is the velocity of the particle, B is the magnetic field strength, and θ is the angle between the velocity vector and the magnetic field vector.
In this case, the bob of the pendulum has a charge of +0.250 μC (or 0.250 × 10^-6 C) and is released from a height of 40.0 cm (or 0.40 m) above its lowest point. The magnetic field strength (B) is 2.50 T.
At the lowest point, the velocity of the bob is purely horizontal and perpendicular to the magnetic field. Therefore, the angle θ between the velocity vector and the magnetic field vector is 90 degrees.
Substituting the given values into the formula:
F = (0.250 × 10^-6 C) * v * (2.50 T) * sin(90 degrees)
Since sin(90 degrees) = 1, the equation simplifies to:
F = (0.250 × 10^-6 C) * v * (2.50 T)
We need to determine the velocity of the bob at the lowest point. To do that, we can use the conservation of mechanical energy. At the release point, all the potential energy is converted into kinetic energy:
mgh = (1/2)mv²
where m is the mass of the bob, g is the acceleration due to gravity, h is the release height, and v is the velocity at the lowest point.
Given that the mass (m) of the bob is 35.0 grams (or 0.035 kg), the release height (h) is 40.0 cm (or 0.40 m), and the acceleration due to gravity (g) is 9.8 m/s², we can solve for v:
(0.035 kg)(9.8 m/s²)(0.40 m) = (1/2)(0.035 kg)v²
v² = (0.035 kg)(9.8 m/s²)(0.80 m)
v² = 0.2744 m²/s²
v ≈ 0.523 m/s
Substituting the value of v into the equation for F:
F = (0.250 × 10^-6 C) * (0.523 m/s) * (2.50 T)
F ≈ 3.28 × 10^-7 N
Therefore, the magnitude of the magnetic force on the bob at the lowest point is approximately 3.28 × 10^-7 N, and the direction of the force is perpendicular to both the velocity vector and the magnetic field vector.
(b) To find the acceleration of the bob at the bottom of its swing, we need to analyze the forces acting on the bob using a free-body diagram.
The forces acting on the bob are the tension in the string (T) and the gravitational force (mg).
At the bottom of the swing, the tension in the string provides the centripetal force to keep the bob moving in a circular path. Therefore, the tension (T) is equal to the centripetal force:
T = m * a_c
where m is the mass of the bob and a_c is the centripetal acceleration.
The gravitational force (mg) acts vertically downward. At the bottom of the swing, it does not contribute to the acceleration along.
To know more about Acceleration, click here:
brainly.com/question/2303856
#SPJ11
Which of the following explains why there is a lower limit to what can actually be seen with visible light? a) Visible light waves are larger than the smallest objects in existence b) Visible light waves are smaller than the smallest objects in existence c) Visible light waves are always absorbed by small objects d) Visible light waves are not emitted by extremely small objects
There is a lower limit to what can actually be seen with visible light visible light waves are smaller than the smallest objects in existence (option b).
The lower limit of visible light is due to the wavelength of the light. This is the primary explanation. There are some things that are too small to be seen using visible light since the wavelength of the light is smaller than the objects' size. The best option among the given alternatives that explains why there is a lower limit to what can actually be seen with visible light is b) Visible light waves are smaller than the smallest objects in existence.
To know more about visible:
https://brainly.com/question/15093941
#SPJ11
According to the 2nd Law of Thermodynamics
a.) Kinetic energy transformed into heat (e.g. via friction) can be completely converted back to kinetic energy
b.) Heat is just like any other form of energy
c.) Heat cannot be completely converted back into other forms of energy
d.) None of these
Option c) Heat cannot be completely converted back into other forms of energy is the correct answer.
According to the 2nd Law of Thermodynamics, Heat cannot be completely converted back into other forms of energy. This law is also known as the law of entropy and states that every energy transfer or conversion increases the entropy of the universe, meaning that the disorder and randomness of the system will increase over time.
This implies that when heat is transformed into other forms of energy such as mechanical or electrical energy, some of the heat energy is lost in the conversion process and cannot be recovered.
Therefore, option c) Heat cannot be completely converted back into other forms of energy is the correct answer.
To learn more about energy visit;
https://brainly.com/question/1932868
#SPJ11
Two cars collide at an icy intersection and stick together afterward. The first car has a mass of 1,200 kg and is approaching at 7.74 m/s due south. The second car has a mass of 805 kg and is
approaching at 15.7 m/s due west.
Calculate the final velocity (magnitude and direction) of the cars.
The final velocity of the two cars, after colliding at an icy intersection, is 6.51 m/s at an angle of 309 degrees from the south.
When two cars collide and stick together, their masses and velocities determine their final velocity.
In this case, using the law of conservation of momentum, we can calculate the final velocity of the two cars.
The initial momentum of the first car is (1200 kg)(7.74 m/s) = 9292.8 kgm/s south.
The initial momentum of the second car is (805 kg)(15.7 m/s) = 12648.5 kgm/s west.
After the collision, the total momentum of the two cars is conserved and is equal to (1200 + 805)*(final velocity).
Solving for the final velocity, we get a magnitude of 6.51 m/s.
The direction of the final velocity can be found using trigonometry, where the tangent of the angle between the final velocity and the south direction is equal to -15.7/7.74.
This gives us an angle of 309 degrees from the south.
Therefore, the final velocity of the two cars is 6.51 m/s at an angle of 309 degrees from the south.
Learn more about Velocity from the given link:
https://brainly.com/question/18084516
#SPJ11
At what separation is the electrostatic force between a+16−μC point charge and +70−μC point charge equal in magnitude to 4.6 N ? (in m)
The separation between the +16μC point charge and +70μC point charge, where the electrostatic force is equal in magnitude to 4.6N, is 0.0887m.
To find the separation between the point charges, we can use Coulomb's law. The formula for Coulomb's law is given as F = k (q1q2) / r² where, F is the electrostatic force, k is Coulomb's constant, q1 and q2 are the magnitudes of the charges, r is the distance between the two charges.
We are given that the electrostatic force between the +16μC point charge and +70μC point charge is equal to 4.6N. Therefore, we can write the equation as:
4.6 = k (16 × 10⁻⁶) (70 × 10⁻⁶) / r²
Simplifying the above equation, we get:
r = 0.0887 m.
Hence, the separation between the +16μC point charge and +70μC point charge, where the electrostatic force is equal in magnitude to 4.6N, is 0.0887m.
Learn more about Coulomb's law here:
https://brainly.com/question/506926
#SPJ11
Consider the potential So : |x| 0 is some real number and Vo > 0. You may assume, without proof, that the result- ing wavefunctions have definite parity, i.e., either (i) (-x) (x) (even, or positive parity), or (ii) 4(-x) = −4(x) (odd, or negative parity). This property, in fact, holds for any potential that is even: V(-x) = V(x). = Aex, where A is a (c) Show that the wavefunction in region (i) must have the form (x) constant. (d) Show that the wavefunction in region (iii) must have the form 4(x) = Ce-x, where C is a constant. (f) Express C as a function of A for the two possible parities of the wavefunction.
In the given problem, we have a potential function, So, which can have two types of wavefunctions with definite parity: (i) even (positive parity) or (ii) odd (negative parity).
For region (i), the wavefunction has the form (x) = constant. For region (iii), the wavefunction has the form 4(x) = Ce^(-x), where C is a constant. The constant C can be expressed as a function of A, the coefficient of the potential function, for the two possible parities of the wavefunction.
(c) In region (i), the potential function is even, which means V(-x) = V(x). This property leads to an even wavefunction, which has definite parity. The form of the wavefunction in region (i) is given as (x) = constant. The constant value ensures that the wavefunction satisfies the Schrödinger equation in region (i).
(d) In region (iii), the potential function is also even, and we are looking for an odd wavefunction with definite parity. The form of the wavefunction in region (iii) is 4(x) = Ce^(-x), where C is a constant. The exponential term with a negative sign ensures that the wavefunction has the opposite sign when x changes to -x, satisfying the condition for an odd function.
(f) To express C as a function of A, we need to consider the boundary conditions at the interface between regions (i) and (iii). The wavefunction must be continuous, and its derivative must be continuous at the boundary. By applying these conditions, we can solve for C in terms of A for the two possible parities of the wavefunction.
The specific calculations to determine the constant values and the functional relationship between C and A would require further analysis and solving the Schrödinger equation with the given potential function.
To know more about Schrödinger , click here-
brainly.com/question/31642338
#SPJ11
A gas undergoes two processes. In the first, the volume remains constant at 0.190 m³ and the pressure increases from 3.00×105 Pa to 6.00×10^5 Pa. The second process is a compression to a volume of 0.130 m³ at a constant pressure of 6.00×10^5 . Find the total work done by the gas during both processes. Express your answer in joules.
A gas undergoes two processes as follows :In the first process: The volume is constant at 0.190 m³The initial pressure, P₁ = 3.00×10⁵ Pa The final pressure, P₂ = 6.00×10⁵ PaIn the second process: The pressure is constant at 6.00×10⁵ Pa The initial volume, V₁ = 0.190 m³The final volume, V₂ = 0.130 m³To
find the total by the gas during both processes, we use the formula for work done in an isobaric process, and then add the work done in an isovolumetric process to it. Work done in isobaric process[tex]: W = PΔV = P(V₂ - V₁)W₁ = PΔV₁ = P₁(V₂ - V₁)W₁ = 3.00×10⁵ Pa × (0.130 m³ - 0.190 m³)W₁ = -9.0 × 10⁴ J[/tex] (Negative sign indicates work done by gas)Work done in is ovolumetric process: W₂ = 0 (As there is no change in volume, ΔV = 0)Therefore, the total work done by the gas during both processes is: [tex]W = W₁ + W₂W = -9.0 × 10⁴ J + 0 = -9.0 × 10⁴[/tex]J (Negative sign indicates work done by gas)Hence, the total work done by the gas during both processes is -9.0 × 10⁴ J.
To know more about constant visit:
brainly.com/question/31730278
#SPJ11
an aluminum calorimeter cup has a mass of 23. 0 g. It contains 39.0 g of pure water. The cob and water have an equilibrium temperature of 19.0°C. A hot piece of copper with an original temperature of 115 Celsius is added to the cup. When all three objects cup, water, and copper, reach thermal equilibrium, the mixture is at 74. 0°C. What is the mass of the piece of copper? Assume no heat is lost to the environment.
The mass of the copper piece is approximately 52.5 g.
To find the mass of the copper piece, we can use the principle of conservation of energy. The heat gained by the water and calorimeter is equal to the heat lost by the copper.
First, we calculate the heat gained by the water and calorimeter using the formula Q = mcΔT, where Q is the heat, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.
Assuming the specific heat capacity of water is 4.18 J/g°C and that of aluminum is 0.897 J/g°C, we can calculate the heat gained as follows:
Q_water = (39.0 g + 23.0 g) * 4.18 J/g°C * (74.0°C - 19.0°C) = 7655.52 J
Q_calorimeter = 23.0 g * 0.897 J/g°C * (74.0°C - 19.0°C) = 970.65 J
Since the heat lost by the copper is equal to the heat gained by the water and calorimeter, we have:
Q_copper = Q_water + Q_calorimeter
m_copper * 0.385 J/g°C * (115°C - 74.0°C) = 7655.52 J + 970.65 J
m_copper = (7655.52 J + 970.65 J) / (0.385 J/g°C * (115°C - 74.0°C))
m_copper ≈ 52.5 g
Therefore, the mass of the copper piece is approximately 52.5 g.
To learn more about Law of conservation of energy
Click here brainly.com/question/29433683
#SPJ11
What happens to the deflection of the galvanometer needle (due to moving the magnet) when you increase the area of the coils? ( original 50%, increase it to 70 % or 80%). Explain.
We can see that when you increase the area of the coils in a galvanometer, the deflection of the galvanometer needle will generally increase as well. This is because the increase in coil area leads to an increase in the magnetic field strength produced by the coils when a current flows through them.
What is galvanometer?A galvanometer is a device used to detect and measure small electric currents. It consists of a coil of wire wound around a movable spindle, a permanent magnet, and a pointer or needle attached to the spindle.
When an electric current passes through the coil, it creates a magnetic field that interacts with the magnetic field of the permanent magnet, causing the spindle to rotate and the pointer to deflect.
Learn more about galvanometer on https://brainly.com/question/16553202
#SPJ4
A playground merry-go-round has a mass of 120 kg and a radius of 1.80 m and it is rotating with an angular velocity of 0.553rev/s. What is its angular velocity (in rev/s) after a 16 kg child gets onto it by grabbing its outer edge? The child is initially at rest.
The angular velocity (in rev/s) after a 16 kg child gets onto it by grabbing its outer edge will be 2.30 rads per sec.
How to calculate the angular velocityTo calculate the angular velocity, we will begin by noting the measurements given to us which are:
Mass of merry-go-round = 120 kg
Radius = 1.80 m
Rotating angular velocity = 0.553 rev/s
Mass of child = 16 kg
We will then apply the velocity formula:
[tex]Wf = \frac{Mmrm^{2} /2.Wb}{Mmrm^{2} /2 + Mcrc^{2} }[/tex]
Factoring in the figures, we will then have
120(1.8)²/2. 3.14 ÷ 20(1.8)²/2 + 22(1.8)²
= 2.3 rad/secs.
Learn more about angular velocity here:
https://brainly.com/question/29566139
#SPJ4
What is the highest voltage that can be generated? What is the
governing limit? Explain different situations where this is
applied
Can a battery be created as a fluid?
Can an AC line have 0HZ?
The highest voltage limit depends on equipment and insulation capability. Batteries are typically not created with fluids. AC lines cannot have a 0 Hz frequency.
The highest voltage that can be generated depends on various factors such as the specific equipment or system used. In electrical systems, the governing limit is typically determined by the breakdown voltage or insulation capability of the components involved. If the voltage exceeds this limit, it can lead to electrical breakdown and failure of the system.
A battery is typically created using solid or gel-like materials as electrolytes, rather than fluids. However, there are some experimental battery technologies that use liquid electrolytes.
An AC line refers to an alternating current power transmission line, which operates at a specific frequency. The frequency is usually 50 or 60 Hz. Zero Hz frequency implies a direct current (DC) rather than an alternating current. Therefore, an AC line cannot have a frequency of 0 Hz.
To know more about voltage, click here:
brainly.com/question/32002804
#SPJ11
How many quarks are in each of the following: (b) an antibaryon
An antibaryon is a particle composed of three antiquarks. Quarks are elementary particles that are the building blocks of matter. There are six types of quarks: up, down, charm, strange, top, and bottom. Each type of quark has an antiquark counterpart.
In an antibaryon, there are three antiquarks. Antiquarks have opposite properties to their corresponding quarks.
For example, the antiquark counterpart of an up quark is called an anti-up quark. Similarly, the antiquark counterpart of a down quark is called an anti-down quark.
So, an antibaryon is composed of three antiquarks, which can be any combination of the six types of antiquarks.
Each of the three antiquarks can be different, or they can be the same. For example, an antibaryon could be composed of an anti-up antiquark, an anti-charm antiquark, and an anti-bottom antiquark.
In summary, an antibaryon consists of three antiquarks.
to learn more about antibaryon
https://brainly.com/question/27879415
#SPJ11
For heat transfer purposes, a standing man can be modeled as a 30.59-cm-diameter, 170.47-cm-long vertical cylinder with both the top and bottom surfaces insulated and with the side surface at an average temperature of 33.3°C. For a convection heat transfer coefficient of 14.48 W/m2 °C, determine the rate of heat loss from this man by convection in an environment at 20.88°C.
The rate of heat loss from the standing man by convection in an environment at 20.88°C is 381.58 Watts.
Explanation:
To calculate the rate of heat loss by convection, we can use the formula:
Q = h * A * ΔT
Where:
Q is the rate of heat transfer,
h is the convective heat transfer coefficient,
A is the surface area of the object, and
ΔT is the temperature difference between the object and the environment.
Step 1: Calculate the surface area of the man
The surface area of the vertical cylinder can be calculated using the formula for the lateral surface area of a cylinder:
A = [tex]2 * π * r * h + π * r^2[/tex]
Given:
Diameter of the cylinder = 30.59 cm
Radius (r) = Diameter/2 = 15.295 cm = 0.15295 m
Height (h) = 170.47 cm = 1.7047 m
Plugging the values into the formula:
A = [tex]2 * π * 0.15295 m * 1.7047 m + π * (0.15295 m)^2[/tex]
A ≈ 1.0325 m^2
Step 2: Calculate the temperature difference
ΔT = T_object - T_environment
ΔT = 33.3°C - 20.88°C = 12.42°C = 12.42 K (as temperature is in Kelvin)
Step 3: Calculate the rate of heat loss
Q = h * A * ΔT
Q = 14.48 W/m^2°C * 1.0325 m^2 * 12.42 K
Q ≈ 381.58 Watts
Therefore, the rate of heat loss from the man by convection in an environment at 20.88°C is approximately 381.58 Watts.
Learn more about rate of heat loss
brainly.com/question/14635288
#SPJ11
Find the resistor value required to set the diode current to 4. 3ma. Show your work
To find the resistor value required to set the diode current to 4.3 mA, we need to use Ohm's law and the diode equation.
The diode equation relates the forward current through a diode (I_F) to the voltage across it (V_D):
I_F = I_S(e^(V_D/(n*V_T)) - 1)
where I_S is the reverse saturation current of the diode, n is the ideality factor (typically between 1 and 2), and V_T is the thermal voltage given by:
V_T = kT/q
where k is Boltzmann's constant, T is temperature in Kelvin, and q is the charge of an electron.
Let R be the value of the resistor in series with the diode. Then, the voltage across the resistor is:
V_R = V_S - V_D
where V_S is the source voltage.
Using Ohm's law, we can write:
I_F = V_R/R
Substituting the expression for V_R and rearranging, we get:
R = (V_S - V_D)/I_F
To calculate the value of R, we need to know the values of V_S, V_D, I_F, I_S, n, T, k, and q. Let's assume that V_S = 5V, I_F = 4.3 mA, I_S = 10^(-12) A, n = 1, T = 300 K, k = 1.38 x 10^(-23) J/K, and q = 1.6 x 10^(-19) C.
Using the diode equation, we can solve for V_D:
V_D = nV_Tln(I_F/I_S + 1)
Substituting the values, we get:
V_T = kT/q = (1.38 x 10^(-23) J/K)(300 K)/(1.6 x 10^(-19) C) ≈ 0.026 V
V_D = (1)(0.026 V)*ln(4.3 x 10^(-3) A/10^(-12) A + 1) ≈ 0.655 V
Substituting the values into the expression for R, we get:
R = (5 V - 0.655 V)/(4.3 x 10^(-3) A) ≈ 1023 ohms
Therefore, the resistor value required to set the diode current to 4.3 mA is approximately 1023 ohms.
learn more about diode here:
brainly.com/question/30505903
#SPJ11
A resistor and inductor are connected in series across an ac generator. The voltage of the generator is given by V(t) = Vo cos(wt), where V, = 120 V, w = 1207 rad/s, R = 7001, and L = 1.5 H. (a) What is the magnitude of the impedance of the LR circuit? (b) What is the amplitude of the current through the resistor? (c) What is the phase difference between the voltage and current?
(a) The magnitude of the impedance of the LR circuit is 8.64 kΩ.
(b) The amplitude of the current through the resistor is 14 mA.
(c) The phase difference between the voltage and current is 18°.
(a) The magnitude of the impedance of the LR circuit:
The formula for the impedance of the circuit is given by Z = sqrt(R² + wL²)
where,
R = 7001
L = 1.5 H
w = 1207 rad/s
Now substituting the values in the equation
Z = sqrt((7001)² + (1207 × 1.5)²)
≈ 8635.2 Ω
≈ 8.64 kΩ
Therefore, the magnitude of the impedance of the LR circuit is 8.64 kΩ.
(b) The amplitude of the current through the resistor:
The formula for the amplitude of current is given by I = Vmax / Z, where Vmax is the maximum voltage.
Vmax = 120 VI
= Vmax / Z = 120 V / 8.64 kΩ
= 13.89 mA≈ 14 mA
Therefore, the amplitude of the current through the resistor is 14 mA.
(c) The phase difference between the voltage and current:
The formula for calculating the phase angle is given by tanφ = (wL / R),
where R is the resistance in ohms, w is the frequency in radians/second and L is the inductance in henrys.
φ = tan⁻¹(wL / R)
φ = tan⁻¹(1207 × 1.5 / 7001)
≈ 17.6°
≈ 18°
Therefore, the phase difference between the voltage and current is 18°.
Note: Here, the value 150 is not mentioned in the question, so it's difficult to understand what it represents.
Learn more about magnitude from this link:
https://brainly.com/question/17157624
#SPJ11
A quantity is calculated bases on (20 + 1) + [(50 + 1)/(5.0+ 0.2)] value of the quantity is 30, but what is the uncertainty in this?
Thus, the uncertainty in the calculated quantity is approximately 0.10. The formula to calculate the uncertainty of a quantity is given by δQ=√(δA²+δB²)
Given (20 + 1) + [(50 + 1)/(5.0+ 0.2)] = 30. (20 + 1) + [(50 + 1)/(5.0+ 0.2)] is the quantity whose uncertainty we want to calculate.
We know that: δA = uncertainty in 20.1 = ±0.1δ
B = uncertainty in (50 + 1)/(5.0+ 0.2) = uncertainty in (51/5.2)
We have to calculate δB:δB = uncertainty in (51/5.2) = δ[(50 + 1)/(5.0+ 0.2)] = δ(51/5.2) = [(1/5.2)² + (0.2*51)/(5.2²)]½= (0.00641 + 0.00293)½= 0.0083
∴δQ = √(δA² + δB²) = √(0.1² + 0.0083²) = √(0.01009) = 0.1005 ≈ 0.10
Thus, the uncertainty in the calculated quantity is approximately 0.10.
Learn further about uncertainty of quantities: https://brainly.com/question/31185232
#SPJ11
Simple Rotational Variables Problem Points:40 The angular position of a point on the rim of a rotating wheel is given by 0 = 2.2t + 4.2t² + 1.9t3, where 0 is in radians if t is given in seconds. What is the angular speed at t = 3.0 s? 95.7rad/s Submit Answer Incorrect. Tries 1/40 Previous Tries What is the angular speed at t = 5.0 s? 353.5rad/s Submit Answer What is the Incorrect. Tries 2/40 Previous Tries average angular acceleration for the time interval that begins at t = 3.0 s and ends at t = 5.0 s? Submit Answer Tries 0/40 What is the instantaneous acceleration at t = 5.0 s? Submit Answer Tries 0/40 Post Discussion Send Feedback
The angular position of a point on the rim of a rotating wheel is given by θ = 2.2t + 4.2t² + 1.9t³, θ where is in radians if t is given in seconds.
The angular speed at t = 3.0 s is 78.7 rad/s.
The angular speed at t = 5.0 s is 186.7 rad/s.
The average angular acceleration for the time interval that begins at t = 3.0 s and ends at t = 5.0 s is 54.0 rad/s².
The instantaneous acceleration at t = 5.0 s is 65.4 rad/s².
To find the angular speed at t = 3.0 s, we need to differentiate the given equation for angular position (θ) with respect to time (t):
ω = dθ/dt
Given that the equation for angular position is θ = 2.2t + 4.2t² + 1.9t³, we can differentiate it to find the angular speed:
ω = dθ/dt = 2.2 + 8.4t + 5.7t²
Now we can substitute t = 3.0 s into the equation to find the angular speed at t = 3.0 s:
ω = 2.2 + 8.4(3.0) + 5.7(3.0)²
= 2.2 + 25.2 + 51.3
= 78.7 rad/s
Therefore, the angular speed at t = 3.0 s is 78.7 rad/s.
To find the average angular acceleration for the time interval from t = 3.0 s to t = 5.0 s, we can use the formula:
Average angular acceleration (αₐ) = (ω₂ - ω₁) / (t₂ - t₁)
Given that t₁ = 3.0 s, t₂ = 5.0 s, and ω₁ = 78.7 rad/s (from the previous calculation), we need to find ω₂ at t = 5.0 s. Following the same process as before, we differentiate the equation for angular position:
ω = 2.2 + 8.4t + 5.7t²
ω₂ = 2.2 + 8.4(5.0) + 5.7(5.0)²
= 2.2 + 42 + 142.5
= 186.7 rad/s
Substituting the values into the average angular acceleration formula:
αₐ = (ω₂ - ω₁) / (t₂ - t₁)
= (186.7 - 78.7) / (5.0 - 3.0)
= 108.0 / 2.0
= 54.0 rad/s²
Therefore, the average angular acceleration for the time interval from t = 3.0 s to t = 5.0 s is 54.0 rad/s².
Finally, to find the instantaneous acceleration at t = 5.0 s, we need to differentiate the angular speed equation:
ω = 2.2 + 8.4t + 5.7t²
Differentiating with respect to time:
α = dω/dt = 8.4 + 11.4t
Substituting t = 5.0 s:
α = 8.4 + 11.4(5.0)
= 8.4 + 57
= 65.4 rad/s²
Therefore, the instantaneous acceleration at t = 5.0 s is 65.4 rad/s².
To know more about angular position here
https://brainly.com/question/31604955
#SPJ4
The angular position of a point on the rim of a rotating wheel is given by θ = 2.2t + 4.2t² + 1.9t³, θ where is in radians if t is given in seconds. What is the angular speed at t = 3.0 s? What is the angular speed at t = 5.0 s? What is the average angular acceleration for the time interval that begins at t = 3.0 s and ends at t = 5.0 s? What is the instantaneous acceleration at t = 5.0 s?
The angular speed at t = 3.0 s can be found by taking the derivative of the given equation with respect to time and evaluating it at t = 3.0 s. Differentiating the equation [tex]0 = 2.2t + 4.2t^2 + 1.9t^3[/tex] with respect to t gives us the angular speed as the coefficient of the first-order term.
By differentiating the equation, we obtain [tex]0 = 2.2 + 8.4t + 5.7t^2[/tex]. Substituting t = 3.0 s into the equation, we can find the angular speed at t = 3.0 s.
The average angular acceleration for the time interval that begins at t = 3.0 s and ends at t = 5.0 s can be calculated by finding the change in angular speed over the given time interval and dividing it by the duration of the interval.
To find the instantaneous acceleration at t = 5.0 s, we need to take the derivative of the angular speed equation with respect to time and evaluate it at t = 5.0 s. The derivative of the angular speed equation will give us the angular acceleration at any given time.
To learn more about Angular Speed
brainly.com/question/29058152
#SPJ11
The 1700-turn coil in a dc motor has an area per turn of 2.3 x 10-2 m^2. The design for the motor specifes that the magnitude of the
maximum torque is 2.1 N-m when the coil is placed in a 0.16-T magnetic feld. What is the current in the coil?
The current in the coil is 3.73 A.
Area per turn of coil, A/t = 2.3 × 10^-2 m²
Number of turns of the coil, N = 1700
Maximum torque, T = 2.1 N-m
Magnetic field, B = 0.16 T
We know that the torque on a coil is given by the formula:
T = NABI Sinθ
where,
N = Number of turns
A = Area per turn of the coil
B = Magnetic field
I = Current in the coil
θ = Angle between A and B
And I can be expressed as:
I = (T/NA) / BISinθ
Now, we need to calculate I. So let's calculate the required parameters.
Torque on the coil:
T = 2.1 N-m
Number of turns of the coil:
N = 1700
Area per turn of the coil:
A/t = 2.3 × 10^-2 m²
Magnetic field:
B = 0.16 T
I = (T/NA) / BISinθ
⇒ I = T / (NABISinθ)
Here, Sinθ = 1 (because θ = 90°)
∴ I = T / (NAB)
Putting the values of T, N, A, and B, we get:
I = (2.1 N-m) / [(1700)(2.3 × 10^-2 m²)(0.16 T)]
≈ 3.73 A
Therefore, the current in the coil is 3.73 A.
To learn more about coil, refer below:
https://brainly.com/question/12000391
#SPJ11
Suppose a tunnel could be dug
through the Earth from one side to the other along a diameter, as
shown in Fig. 14-10. A particle of mass m is dropped into the tunnel
from rest at the surface. (a) What is the force on the particle
when it is a distance r from the center? (b) What is the speed of
the particle when it is a distance r from the center? Evaluate the
speed at r 0. Neglect all frictional forces and assume that the
Earth has a uniform density.
a) The force on the particle when it is a distance r from the center can be calculated using the equation for gravitational force: F = (G * M * m) / r^2
b) At r = 0, the speed can be evaluated as: v = sqrt((2 * G * M) / r).
To solve this problem, we can use the principles of gravitational force and conservation of mechanical energy.
(a) The force on the particle when it is a distance r from the center can be calculated using the equation for gravitational force:
F = (G * M * m) / r^2,
where F is the force, G is the gravitational constant, M is the mass of the Earth, m is the mass of the particle, and r is the distance from the center.
(b) To find the speed of the particle at a distance r from the center, we can use conservation of mechanical energy. At the surface of the Earth, the particle has potential energy (due to its height) and no kinetic energy. As it falls towards the center, its potential energy decreases while its kinetic energy increases. At any distance r from the center, the sum of potential and kinetic energy remains constant.
At the surface:
Potential energy (U) = m * g * h,
Kinetic energy (K) = 0.
At distance r:
Potential energy (U) = - (G * M * m) / r,
Kinetic energy (K) = (1/2) * m * v^2,
where g is the acceleration due to gravity, h is the initial height, v is the velocity, and M is the mass of the Earth.
Since the total mechanical energy is conserved, we have:
U + K = constant.
Setting the initial potential energy equal to the potential energy at distance r and solving for the velocity, we get:
m * g * h + 0 = - (G * M * m) / r + (1/2) * m * v^2.
Simplifying the equation, we find:
v = sqrt((2 * G * M) / r - 2 * g * h).
At r = 0, the speed can be evaluated as:
v = sqrt((2 * G * M) / r).
Note that in the above equations, we assume that the Earth has a uniform density and neglect all frictional forces.
To learn more about gravitational force
https://brainly.com/question/27943482
#SPJ11
In 2022, a 25-year-old astronaut left Earth to explore the galaxy; her spaceship travels at 2.5×10 ^8 m/s. She will return in 2035 . About how old will she appear to be? Justify your answer with one or more equations. () Calculate the work function that requires a 410 nm photon to eject an electron of 2.0eV. (Hint: Look for the values of constants on the formula sheet.) () An electron is moving at 3.8×10 ^6 m/s. What wavelength photon would have the same momentum? ()
The wavelength of a photon with the same momentum as an electron moving at 3.8×10^6 m/s.
To determine how old the astronaut will appear to be upon her return in 2035, we need to account for the effects of time dilation due to her high velocity during space travel.
According to the theory of relativity, time dilation occurs when an object is moving relative to an observer at a significant fraction of the speed of light.
The equation that relates the time experienced by the astronaut (Δt') to the time measured on Earth (Δt) is given by:
Δt' = Δt / γ
where γ is the Lorentz factor, defined as:
γ = 1 / sqrt(1 - v^2/c^2)
In this equation, v is the velocity of the astronaut's spaceship (2.5×10^8 m/s) and c is the speed of light (approximately 3×10^8 m/s).
To calculate the value of γ, substitute the values into the equation and evaluate it. Then, calculate the time experienced by the astronaut (Δt') using the equation above.
The difference in time between the astronaut's departure (2022) and return (2035) is Δt = 2035 - 2022 = 13 years. Subtract Δt' from the departure year (2022) to find the apparent age of the astronaut upon her return.
For the second question regarding the work function, the work function (Φ) represents the minimum energy required to remove an electron from a material. It can be calculated using the equation:
Φ = E_photon - E_kinetic
where E_photon is the energy of the photon and E_kinetic is the kinetic energy of the ejected electron.
In this case, the energy of the photon is given as 410 nm, which can be converted to Joules using the equation:
E_photon = hc / λ
where h is the Planck constant (6.626×10^-34 J·s), c is the speed of light, and λ is the wavelength in meters.
Calculate the energy of the photon and then substitute the values into the equation for the work function to find the answer.
For the third question regarding the wavelength of a photon with the same momentum as an electron moving at 3.8×10^6 m/s, we can use the equation that relates the momentum (p) of a photon to its wavelength (λ):
p = h / λ
Rearrange the equation to solve for λ and substitute the momentum of the electron to find the corresponding wavelength of the photon.
learn more about photon from given link
https://brainly.com/question/30858842
#SPJ11
What is the electric field between the plates of a capacitor
that has a charge of 14.35 microC and voltage difference between
the plates of 37.25 Volts if the plates are separated by 13.16
mm?
The electric-field between the plates of the capacitor is approximately 2831.46 V/m.
The electric field between the plates of a capacitor can be determined by using the formula: Electric field (E) = Voltage difference (V) / Plate separation distance (d)
In this case, we are given the following values:
Charge (Q) = 14.35 microC = 14.35 * 10^-6 C
Voltage difference (V) = 37.25 V
Plate separation distance (d) = 13.16 mm = 13.16 * 10^-3 m
We can calculate the electric field as follows:
E = V / d
E = 37.25 V / (13.16 * 10^-3 m)
E = 2831.46 V/m
Therefore, the electric-field between the plates of the capacitor is approximately 2831.46 V/m.
To learn more about electric-field , click here : https://brainly.com/question/15800304
#SPJ11