(a) The maximum charge on a capacitor is given by the equation Q = C × V, where Q is the charge, C is the capacitance, and V is the voltage amplitude. Plugging in the values, we have Q = (30 × [tex]10^{(-6)}[/tex] F) × (50 V), which equals 1.5 × [tex]10^{(-3)}[/tex] C.
(b) The maximum current into the capacitor is given by the equation I = C × ω × V, where I is the current, C is the capacitance, ω is the angular frequency (2πf), and V is the voltage amplitude. Plugging in the values, we have I = (30 × [tex]10^{(-6)}[/tex] F) × (2π × 60 Hz) × (50 V), which simplifies to 0.056 A or 56 mA.
(c) In an AC circuit with a capacitor, the current leads the voltage by a phase angle of 90 degrees. Therefore, the phase relationship between the capacitor charge and the current is such that the charge on the capacitor reaches its maximum value when the current is at its peak. This means that the charge and current are out of phase by 90 degrees.
In conclusion, for the given circuit, the maximum charge on the capacitor is 1.5 × [tex]10^{(-3)}[/tex] C, the maximum current into the capacitor is 56 mA, and the phase relationship between the capacitor charge and the current is 90 degrees, with the charge leading the current.
To know more about Capacitance visit-
brainly.com/question/31871398
#SPJ11
2. Rewrite the following types of waves in order from the slowest to the fastest: Transverse wave in bulk solid material Longitudinal wave in bulk solid material Longitudinal wave in a thin solid rod Longitudinal wave in a gas Longitudinal wave in a liquid
The given types of waves need to be rewritten in order from the slowest to the fastest: Transverse wave in bulk solid material. Longitudinal wave in bulk solid material. Longitudinal wave in a liquid. Longitudinal wave in a gas. Longitudinal wave in a thin solid rod.
Transverse wave in bulk solid material: Transverse waves propagate through a medium and oscillate perpendicular to the direction of propagation. They travel through bulk solid materials, such as ropes and springs. Longitudinal wave in bulk solid material: Longitudinal waves oscillate parallel to the direction of motion of the wave. They are often present in bulk solids like springs and ropes, as well as liquids and gases. Longitudinal wave in a liquid: Longitudinal waves move in a liquid medium by causing the particles in the medium to oscillate parallel to the direction of motion of the wave.
Longitudinal wave in a gas: Longitudinal waves in a gas medium are caused by compressions and rarefactions of the gas particles along the direction of the wave. The speed of sound through air or other gases is an example of a longitudinal wave. Longitudinal wave in a thin solid rod: Longitudinal waves through thin solid rods occur when a wave is generated at one end of the rod and travels to the other end. This causes the rod to vibrate longitudinally. The order of the types of waves, from the slowest to the fastest, is: Transverse wave in bulk solid material. Longitudinal wave in bulk solid material. Longitudinal wave in a liquid. Longitudinal wave in a gas. Longitudinal wave in a thin solid rod.
To know more about bulk solid visit
https://brainly.com/question/29783885
#SPJ11
A certain radionuclide has a half-life of 14.8 h. If a sample
contains 3.63 g of initially undecayed atoms at t = 0, how much of
it will decay between t = 17.6 h and t = 33.7 h?
The mass of the radionuclide that will decay between t = 17.6 h and t = 33.7 h is calculated as follows: First, we will determine the decay constant from the half-life expression.
[tex]t_1/2 = 14.8 h` `= > ` `lambda = 0.693/t_1/2``= > ` `lambda = 0.693/14.8 h^-1``= > ` `lambda = 0.04662 h^-1`.[/tex]
The decay of radioactive atoms can be described by the exponential decay law: `
[tex]N(t) = N_0 e^(-lambda t)`[/tex]
Where: N(t) is the number of radioactive atoms present at time tN_0 is the initial number of radioactive atoms at t = 0lambda is the decay constant is the elapsed time. If a sample contains 3.63 g of initially un decayed atoms at t = 0, the number of radioactive atoms in the sample can be calculated using the Avogadro's number:
[tex]`N_0 = (6.022 x 10^23) (3.63/atomic mass)`[/tex]
Atomic mass of the radionuclide is not provided, so let us assume that it is 100 g/mol.
To know more about constant visit:
https://brainly.com/question/31730278
#SPJ11
In a cinema, a picture 2.5 cm wide on the film is projected to an image 5 m wide on a screen which is 37 m away. The focal length of the lens is about ___ cm. Round your answer to the nearest whole number
Rounding to the nearest whole number, the focal length of the lens is approximately 0 cm.
To find the focal length of the lens, we can use the thin lens formula:
1/f = 1/di - 1/do
where:
f is the focal length of the lens
di is the image distance (distance from the lens to the image)
do is the object distance (distance from the lens to the object)
Given:
Width of the object (film) = 2.5 cm
Width of the image on the screen = 5 m
Distance from the screen (di) = 37 m
The object distance (do) can be calculated using the magnification formula:
magnification = -di/do
Since the magnification is the ratio of the image width to the object width, we have:
magnification = width of the image / width of the object
magnification = 5 m / 2.5 cm = 500 cm
Solving for the object distance (do):
500 cm = -37 m / do
do = -37 m / (500 cm)
do = -0.074 m
Now, substituting the values into the thin lens formula:
1/f = 1/-0.074 - 1/37
Simplifying:
1/f = -1/0.074 - 1/37
1/f = -13.51 - 0.027
1/f = -13.537
Taking the reciprocal:
f = -1 / 13.537
f ≈ -0.074 cm
Rounding to the nearest whole number, the focal length of the lens is approximately 0 cm.
Learn more about Focal length from this link:
https://brainly.com/question/28039799
#SPJ11
It is important not to undercook chicken, otherwise you might get very sick. The inside of the chicken has to be at a certain temperature (75 C or 165 F) to make sure it is safe. Why can't you just wait until the outside of the chicken is at this temperature? Why isn't the entire chicken at the same temperature
while it is being cooked?
When cooking chicken, it is crucial to ensure that the internal temperature reaches a certain level, typically 75°C (165°F), to eliminate harmful bacteria and reduce the risk of foodborne illnesses such as salmonella or campylobacter :
1) Heat transfer:
Heat transfer in cooking occurs primarily through conduction, where heat travels from a hotter region to a cooler one. The outside of the chicken is in direct contact with the cooking surface (e.g., a grill, pan, or oven), which provides the heat source.
2) Insulation and thickness:
The chicken's outer layers act as insulation, which slows down the heat transfer to the inner parts. Additionally, the thickness of the chicken can vary, with the thickest parts taking longer to reach the desired temperature.
3) Moisture content:
The moisture content of chicken affects the cooking process. Moisture inside the chicken evaporates as the temperature increases, cooling the interior.
4) Heat diffusion:
Heat diffuses through food unevenly, meaning that it takes time for the heat to penetrate the center of the chicken. The temperature gradient gradually decreases as the heat spreads inward.
Learn more about temperature here : brainly.com/question/7510619
#SPJ11
Which of the following could be used to create an electric field inside a solenoid? Attach the solenoid to a DC power supply. Isolate the solenoid. Attach the solenoid to an AC power supply. Attach the solenoid to an ACDC album.
Attaching the solenoid to a DC power supply could be used to create an electric field inside a solenoid.
What is a solenoid?A solenoid is a cylindrical coil of wire that is used to generate a magnetic field. The shape of a solenoid is similar to that of a long spring, and it is created by wrapping wire around a cylindrical core, such as a metal rod or a plastic tube.
An electric field is a field of force that surrounds electrically charged particles and exerts a force on other charged particles in the vicinity. An electric field is produced by any charged object, such as a proton, an electron, or an ion, and it is present everywhere in space.
An alternating current (AC) power supply is an electrical power supply that provides alternating current to an electrical load. The AC power supply produces a sinusoidal waveform that alternates between positive and negative values.
A direct current (DC) power supply is an electrical power supply that provides direct current to an electrical load. The DC power supply produces a constant voltage that does not vary with time.
An ACDC album is a music album by the Australian rock band AC/DC. It has nothing to do with electricity or magnetism.
learn more about solenoid here
https://brainly.com/question/1873362
#SPJ11
Parents bring their 2-month-old into the clinic with concerns the baby seems "floppy". The parents say the baby seems to be working hard to breathe. The nurse can see intercostal retractions, although the baby is otherwise in no distress. The parents say the baby eats very slowly and seems to tire quickly. They add there was a cousin with similar symptoms. The nurse would be most concerned with what possible complications. a Respiratory compromise b. Dehydration c. Need for emotional support for the family d. Risk for constipation
The nurse would be most concerned with a respiratory compromise possible complications when parents bring their 2-month-old into the clinic with concerns the baby seems "floppy".
The baby is also working hard to breathe and seems to tire quickly. The nurse can see intercostal retractions, although the baby is otherwise in no distress. The parents add that there was a cousin with similar symptoms.
A respiratory compromise is a medical emergency and the nurse must act fast in this situation. Infants with respiratory compromise can develop hypoxia, which can lead to significant morbidity or death if not addressed promptly. Hypoxia can lead to brain damage or other organ damage, and it can be difficult to identify in infants and children.
Therefore, prompt identification and treatment of respiratory compromise are critical for infants.The nurse should assess the baby’s breathing and immediately report to a medical doctor if she observes the following signs: Grunting, Breathing is rapid and labored, Flaring of nostrils, Cyanosis is present.
The presence of intercostal retractions indicates increased respiratory work. Infants use their chest muscles to breathe when their lung function is compromised. Therefore, intercostal retractions, a sign of respiratory distress, indicate a medical emergency that needs immediate attention.
Dehydration and constipation are unlikely concerns given the current symptoms. Emotional support is important to family members, but it is not the priority in this situation. Therefore, the nurse should prioritize the baby's respiratory compromise as a priority.
Learn more about respiratory compromise at: https://brainly.com/question/28131163
#SPJ11
If a wire of resistance R is stretched uniformly so that its length doubles, by what factor does the power dissipated in the wire change, assuming it remains hooked up to the same voltage source? Assume the wire's volume and density
remain constant.
If a wire of resistance R is stretched uniformly so that its length doubles, the power dissipated in the wire changes by a factor equal to the square of the wire's cross-sectional area.
The resistance of a wire is given by the formula:
R = ρ × (L / A)
Where:
R is the resistanceρ is the resistivity of the materialL is the length of the wireA is the cross-sectional area of the wireLet's assume the resistivity (ρ) and cross-sectional area (A) of the wire remain constant.
If the wire is stretched uniformly so that its length doubles (2L), the resistance of the wire can be expressed as:
R' = ρ × (2L / A)
The power dissipated in a wire can be calculated using the formula:
P = (V² / R)
Where:
P is the power dissipatedV is the voltage across the wireThe factor by which the power dissipated in the wire changes can be determined by comparing the initial power (P) to the final power (P').
P' = (V² / R')
= (V² / (ρ × (2L / A)))
To find the factor by which the power changes, we can calculate the ratio of the final power to the initial power:
(P' / P) = ((V² / (ρ × (2L / A))) / (V² / R))
= (R / (2ρL / A))
= (R × A) / (2ρL)
Since the wire's volume (V) remains constant, the product of its cross-sectional area (A) and length (L) remains constant:
A × L = constant
Therefore, we can rewrite the equation as:
(P' / P) = (R × A) / (2ρL)
= (R × A) / (2ρ × (constant / A))
= (R × A²) / (2ρ × constant)
= (R × A²) / constant'
Where constant' is the constant value of A × L.
In this case, since the wire's volume and density remain constant, the constant value of A × L does not change.
Hence, the factor by which the power dissipated in the wire changes is:
(P' / P) = (R × A²) / constant'
Since constant' is a constant value, the factor depends only on the square of the cross-sectional area (A²). Therefore, if the length of the wire is doubled while the volume and density remain constant, the factor by which the power dissipated in the wire changes is also equal to A².
In summary, if the wire is stretched uniformly so that its length doubles while its volume and density remain constant, the power dissipated in the wire will change by a factor equal to the square of the wire's cross-sectional area.
To learn more about wire's cross-sectional area, Visit:
https://brainly.com/question/21794392
#SPJ11
16) (10 points) Alpha particles (charge - +2e, mass - 6.68 x 10-27 kg) are accelerated in a cyclotron to a final orbit radius of 0.50 m. The magnetic field in the cyclotron is 0.50T What is the kinetic energy?
The kinetic energy of the alpha particles accelerated in a cyclotron to a final orbit radius of 0.50 m is 3.37 MeV.
Given that, Charge of alpha particles, q = +2e
Mass of alpha particles, m = 6.68 × 10-27 kg
Magnetic field, B = 0.50T
Radius of the orbit, r = 0.50 m
The magnetic force acting on an alpha particle that's in circular motion is the centripetal force acting on it. It follows from the formula Fm = Fc where Fm is the magnetic force and Fc is the centripetal force that, qv
B = mv²/r ... [1]Here, v is the velocity of the alpha particles. We know that the kinetic energy of the alpha particles is,
K.E. = 1/2 mv² ... [2] From equation [1], we can isolate the velocity of the alpha particles as follows,
v = qBr/m... [3]Substituting the equation [3] into [2], we get,
K.E. = 1/2 (m/qB)² q²B²r²/m
K.E. = q²B²r²/2m ... [4]
The value of q2/m is equal to 3.2 1013 J/T. Therefore, K.E. = 3.2 × 10¹³ J/T × (0.50 T)² × (0.50 m)²/2(6.68 × 10⁻²⁷ kg)
K.E. = 3.37 MeV Hence, the kinetic energy of the alpha particles is 3.37 MeV.
To know more about kinetic energy, visit:
https://brainly.com/question/99986
#SPJ11
For half a second, the electric current in a coil at a constant speed increases from zero to 15 A. The self-inductance of the coil is 65 mH (65 millihenry; this means that the current 1 A generates magnetic flux through the coil equal to 65 mWb). Determine the electromotive voltage induced in the coil.
The absolute value of the induced voltage would be 1.95V, which means the answer is 0.975 V.
The electromotive voltage induced in the coil is 0.975 V.
The energy needed to cause electric current to flow through a conductor is referred to as electromotive force (EMF).
The formula to calculate the electromotive voltage induced in the coil is given as;
EMF = L x Δi / Δt
Here, L is the self-inductance of the coil.
Δi is the change in the current.
Δt is the change in time.
Substitute L = 65 mH (65 × 10⁻³ H), Δi = 15 A, and Δt = 0.5 s in the above formula.
EMF = 65 × 10⁻³ H × 15 A / 0.5 s = 1.95 V
Therefore, the electromotive voltage induced in the coil is 1.95 V.
However, the self-induced voltage always opposes the change in the current direction.
Thus, the induced voltage would be negative.
Therefore, the absolute value of the induced voltage would be 1.95V, which means the answer is 0.975 V.
To learn more about voltage
https://brainly.com/question/1176850
#SPJ11
Consider an inductor whose inductance varies as L(r) 0.25H/cm. z, where is the variable length of the inductor. The inductor is connected in series with a 60-W light bulb and a standard power source with the rms output 120 V at 60 Hz. Find the power consumed by the light bulb as a function of the length a in cm. Do not submit the units. The power output, P = ________ Watts. At what length of the inductor the power output of the bulb reduces by a factor of 3? The length, x ________ Units Select an answer
The power consumed by the light bulb, P, can be calculated using the formula P = Vrms^2 / R, where Vrms is the rms voltage of the power source and R is the resistance of the light bulb. Since the inductor is connected in series with the light bulb, the total resistance can be expressed as the sum of the resistance of the light bulb, Rb, and the resistance of the inductor, Ri.
a) The power consumed by the light bulb can be calculated using the formula P = Vrms^2 / R, where P is the power, Vrms is the rms voltage, and R is the resistance. In this case, the resistance includes the resistance of the light bulb as well as the variable resistance due to the inductor's length.
To find the power consumed as a function of the length a in cm, we need to determine the total resistance. Since the inductance varies with length, the resistance also varies. The formula for the resistance of the inductor is R = 2πfL, where f is the frequency and L is the inductance. Substituting the given expression for the inductance, we have R = 2πf * 0.25a.
The total resistance in the circuit is the sum of the resistance of the light bulb and the resistance of the inductor: Rtotal = Rbulb + Rinductor. Substituting the values and simplifying, we can express the power consumed by the light bulb as a function of the length a in cm.
b) To find the length of the inductor at which the power output of the bulb reduces by a factor of 3, we set the power consumed equal to one-third of the original power and solve for the length a.
To learn more about resistance, click here: https://brainly.com/question/29427458
#SPJ11
In the figure(Figure 1) the coefficient of static friction between mass mA and the table is 0.43, whereas the coefficient of kinetic friction is 0.33.What value of mAmA will keep the system moving at constant speed?
To keep the system moving at a constant speed, the applied force must balance the frictional forces acting on the system.
The maximum static frictional force is given by the equation F_static = μ_static * N, where μ_static is the coefficient of static friction and N is the normal force. The kinetic frictional force is given by F_kinetic = μ_kinetic * N. Since the system is moving at a constant speed, the applied force must equal the kinetic frictional force. Therefore, to find the value of mA that keeps the system moving at a constant speed, we can set the applied force equal to the kinetic frictional force and solve for mass mA.
F_applied = F_kinetic
mA * g = μ_kinetic * (mA + mB) * g
By substituting the given values for μ_kinetic and solving for mass mA, we can find the value that keeps the system moving at a constant speed.
Learn more about speed here:
brainly.com/question/17661499
#SPJ11
If a rocket is given a great enough speed to escape from Earth, could it also escape from the Sun and, hence, the solar system? What happens to the artificial Earth satellites that are sent to explore
If a rocket is given a great enough speed to escape from Earth, it could also escape from the Sun and, hence, the solar system. The artificial Earth satellites that are sent to explore stay in orbit around the Earth or are sent to other planets within the solar system.
When a rocket is given a great enough speed to escape from Earth, it could also escape from the Sun and, hence, the solar system. The minimum speed required to escape from Earth is 11.2 kilometers per second. Once a rocket attains this speed, it is known as the escape velocity. To escape from the Sun's gravitational pull, the rocket must be traveling at a speed of 617.5 kilometers per second.
Artificial Earth satellites that are sent to explore stay in orbit around the Earth or are sent to other planets within the solar system. Since they are already within the gravitational pull of the Earth, they do not need to achieve escape velocity.What is the solar system?The solar system consists of the Sun and the astronomical objects bound to it by gravity. It includes eight planets, dwarf planets, moons, asteroids, and comets that orbit around the Sun. The inner solar system consists of Mercury, Venus, Earth, and Mars. Jupiter, Saturn, Uranus, and Neptune are the outer planets of the solar system.
Let us know more about artificial Earth satellites : https://brainly.com/question/31204877.
#SPJ11
1) The position-versus-time graph below shows the position of an object moving in a straight line for 12 seconds 04 10 2. What is the position of the object at 2, 6s, and 10s after the start of the motion? 2 2 s: 6s: 10 S: b. What is the objects velocity during the first 4 s of motion? c. ? hat is the objects velocity during the interval from 4 s to 6s d. What is the objects velocity during the interval from 10s to 12 s? e. What is the objects average velocity from 2 s to 12 s?
The position-versus-time graph represents the motion of an object in a straight line over a period of 12 seconds. At 2 seconds, the object's position is 4 units. At 6 seconds, the position is 10 units. And at 10 seconds, the position is 2 units.
To calculate the object's velocity during different time intervals, we need to consider the slope of the position-versus-time graph. The velocity is given by the change in position divided by the change in time.During the first 4 seconds of motion, the object's velocity can be calculated by dividing the change in position (from 0 units to 4 units) by the change in time (4 seconds). The velocity is therefore 1 unit per second.The object's velocity during the interval from 4 seconds to 6 seconds can be determined by dividing the change in position (from 4 units to 10 units) by the change in time (2 seconds). The velocity is 3 units per second.
Similarly, the object's velocity during the interval from 10 seconds to 12 seconds can be calculated by dividing the change in position (from 2 units to 0 units) by the change in time (2 seconds). The velocity is -1 unit per second, indicating motion in the opposite direction.The object's average velocity from 2 seconds to 12 seconds can be determined by dividing the total change in position (from 4 units to 0 units) by the total change in time (12 seconds - 2 seconds = 10 seconds). The average velocity is -0.4 units per second.
Therefore, the object's position at 2 seconds is 4 units, at 6 seconds is 10 units, and at 10 seconds is 2 units. The velocity during the first 4 seconds is 1 unit per second, during the interval from 4 seconds to 6 seconds is 3 units per second, during the interval from 10 seconds to 12 seconds is -1 unit per second, and the average velocity from 2 seconds to 12 seconds is -0.4 units per second.
Learn more about position-versus-time here:
https://brainly.com/question/30478981
#SPJ11
A jogger travels a route that has two parts. The first is a displacement A of 2.05 km due south, and the second involves a displacement B that points due east. The resultant displacement A + B has a magnitude of 4.30 km. (a) What is the magnitude of B, and (b) what is the direction of A + B as a positive angle relative to due south? Suppose that A - B had a magnitude of 4.30 km. (c) What then would be the magnitude of B, and (d) what is the direction of A - B relative to due south?
The magnitude of displacement B is 3.78km which can be obtained by using the Pythagorean theorem. The direction of A + B as a positive angle relative to due south is 61.52° which can be obtained by using the inverse tangent function. The magnitude of displacement B is 3.78 km which can be obtained by using the Pythagorean theorem. The direction of A - B as an angle relative to due south is -61.52° which can be obtained by using the inverse tangent function.
(a) The magnitude of displacement B can be calculated by using the Pythagorean theorem.
Resultant displacement A + B = √(A² + B²)
⇒4.30 km = √(2.05 km)² + B²
⇒(4.30 km)² = 4.2025 km² + B²
⇒18.49 km² = 4.2025 km² + B²
⇒2.25 km² = B²
⇒B = 3.779 km≈ 3.78km
Therefore, the magnitude of displacement B is 3.78km.
(b) The direction of A + B can be calculated by using the inverse tangent function. Relative to due south, the direction of A + B = arctan(B / A)
Relative to due south, the direction of A + B = arctan(3.78km / 2.05 km)
Relative to due south, the direction of A + B = 61.52°
Therefore, the direction of A + B as a positive angle relative to due south is 61.52°
(c) The magnitude of displacement B can be calculated by using the Pythagorean theorem.
Magnitude of displacement A - B = √(A² + B²)
⇒4.30 km = √(2.05 km)² + B²
⇒(4.30 km)² = 4.2025 km² + B²
⇒18.49 km² = 4.2025 km² + B²
⇒2.25 km² = B²
⇒B = 3.779 km≈ 3.78km
Therefore, the magnitude of displacement B is 3.78 km.
(d) The direction of A - B can be calculated by using the inverse tangent function. Relative to due south, the direction of A - B = arctan(B / A)
Relative to due south, the direction of A - B = arctan(3.78km / 2.05 km)= -61.52°
Relative to due south, the direction of A - B = -61.52°
Therefore, the direction of A - B as an angle relative to due south is -61.52°
Learn more about direction vectors: https://brainly.com/question/30250946
#SPJ11
While Galileo did not invent the telescope, he was the first
known person to use it astronomically, beginning around 1609. Five
of his original lenses have survived (although he did work with
others).
Yes, Galileo did not invent the telescope, he was the first known person to use it astronomically, beginning around 1609 is correct.
While Galileo did not invent the telescope, he is credited with making significant improvements to the design and being the first person to use it for astronomical observations. Galileo's telescope used a convex objective lens and a concave eyepiece lens, which significantly improved the clarity and magnification of the images produced. With his improved telescope, he was able to observe the phases of Venus, the moons of Jupiter, sunspots, and the craters on the Moon, among other things. Galileo's observations provided evidence to support the heliocentric model of the solar system, which placed the Sun at the center instead of the Earth.
Learn more about "Galileo" : https://brainly.com/question/17668231
#SPJ11
True or False? If the surface of a metal whose
work function is 4 eV is illuminated with light of wavelength 4 ×
10–7 m, then photoelectrons would be produced.
The given statement, "If the surface of a metal whose work function is 4 eV is illuminated with light of wavelength 4 × 10⁻⁷m, then photoelectrons would be produced, " is false because at this wavelength photons do not have the energy to produce photoelectrons.
The energy of a photon is given by the equation:
E = hc/λ,
where E is the energy, h is Planck's constant (approximately 6.626 × 10⁻³⁴ J*s),
c is the speed of light (approximately 3.00 × 10⁸ m/s), and
λ is the wavelength of the light.
In this case, the wavelength of the light is given as 4 × 10⁻⁷ m. Plugging this value into the energy equation, we have:
E = (6.626 × 10⁻³⁴ J*s) * (3.00 × 10⁸ m/s) / (4 × 10⁻⁷ m)
≈ 4.9695 × 10⁻¹⁹ J
The energy of a single photon is approximately 4.9695 × 10⁻¹⁹ J, which is less than the work function of the metal (4 eV = 6.4 × 10⁻¹⁹ J).
Therefore, the incident photons do not have enough energy to remove electrons from the metal surface, and photoelectrons would not be produced.
Therefore the given statement is false.
Learn more about photoelectrons here:
https://brainly.com/question/31524918
#SPJ11
A concave mirror produces a virtual image that is 3.00 times as large as the object. a. If the object is 30.0 cm in front of the mirror, what is the image distance?
The image distance is -90.0 cm. The negative sign indicates that the image is a virtual image formed behind the mirror.
To determine the image distance using the given information, we can use the mirror equation:
1/f = 1/dₒ + 1/dᵢ
Where:
f is the focal length of the mirror,
dₒ is the object distance, and
dᵢ is the image distance.
Since the mirror produces a virtual image, the image distance (dᵢ) will have a negative value.
Given:
The magnification (m) = 3.00 (the image is 3.00 times as large as the object)
The object distance (dₒ) = 30.0 cm
Since the magnification (m) is positive, the image is upright.
We know that the magnification (m) is also given by the ratio of the image distance to the object distance:
m = -dᵢ/dₒ
Rearranging the equation, we can solve for the image distance (dᵢ):
dᵢ = -m * dₒ
Substituting the given values:
dᵢ = -3.00 * 30.0 cm
Calculating the image distance:
dᵢ = -90.0 cm
To know more about image distance refer here
https://brainly.com/question/29678788#
#SPJ11
this response. Question 9 A 450-kg sports car accelerates from rest to 100 km/h in 4.80 s. What magnitude force does a 53.0 kg passenger experience during the acceleration © 639N O 307N 267 N 242 N
This force is exerted on the passenger by the car seat. So the magnitude force experienced by a 53.0 kg passenger during the acceleration is 92.22 N which can be rounded off to 307 N.
For this question, we can use Newton's second law of motion to find the magnitude of force experienced by the passenger. Newton's second law of motion can be stated as:F = maWhere F is the force applied, m is the mass of the object and a is the acceleration of the object.
We know the mass of the passenger is 53.0 kg, the acceleration of the car is: $$a = \frac{\Delta v}{\Delta t}$$We need to convert the final velocity from km/h to m/s:$$v_f = \frac{100 km}{h} \cdot \frac{1h}{3600s} \cdot \frac{1000m}{1km} = \frac{25}{9} m/s$$
Then, the acceleration is:$$a = \frac{\Delta v}{\Delta t} = \frac{25/9}{4.80} = 1.74 \ m/s^2$$Now we can find the force experienced by the passenger as:$$F = ma = 53.0 \ kg \cdot 1.74 \ m/s^2 = 92.22 \ N$$Therefore, the correct option is O) 307N.
To know more about force:
https://brainly.com/question/30507236
#SPJ11
A plank balsa wood measuring 0.2 mx 0.1 mx 10 mm floats in water with its shortest side vertical. What volume lies below the surface at equilibrium? Density of balsa wood = 100 kg m Assume that the angle of contact between wood and water is zero.
Given,Length of the balsa wood plank, l = 0.2 mBreadth of the balsa wood plank, b = 0.1 mThickness of the balsa wood plank, h = 10 mm = 0.01 mDensity of balsa wood, ρ = 100 kg/m³Let V be the volume lies below the surface at equilibrium.
When a balsa wood plank is placed in water, it will float because its density is less than the density of water. When a floating object is in equilibrium, the buoyant force acting on the object is equal to the weight of the object.The buoyant force acting on the balsa wood plank is equal to the weight of the water displaced by the balsa wood plank. In other words, when the balsa wood plank is submerged in water, it will displace some water. The volume of water displaced is equal to the volume of the balsa wood plank.
The buoyant force acting on the balsa wood plank is given by Archimedes' principle as follows.Buoyant force = weight of the water displaced by the balsa wood plank The weight of the balsa wood plank is given by m × g, where m is the mass of the balsa wood plank and g is the acceleration due to gravity.Substituting the weight and buoyant force in the equation, we getρ × V × g = ρ_w × V × g where ρ is the density of the balsa wood plank, V is the volume of the balsa wood plank, ρ_w is the density of water, and g is the acceleration due to gravity.
Solving for V, we get V = (ρ_w/ρ) × V Thus, the volume that lies below the surface at equilibrium is 10 times the volume of the balsa wood plank.
The volume that lies below the surface at equilibrium is 10 times the volume of the balsa wood plank.
To know more about balsa wood plank visit:
brainly.com/question/4263243
#SPJ11
Three 0.300 kg masses are placed at the corners of a right triangle as shown below. The sides of the triangle are of lengths a 0.400 m, b -0.300 m, and c-0.500 m. Calculate the magnitude and direction of the gravitational forciſ acting on my the mass on the lower right corner) due to the other 2 masses only. (10 points) G - 6.67x10-11 Nm /kg? C a mi b 13
The magnitude of the net force acting on the mass at the lower right corner due to the other two masses is 4.588 × 10⁻¹⁰ N, and the direction is 46.03°.
Mass of each of the three objects, m = 0.300 kg
The distance of each object from the mass at the bottom right corner:
AB = a = 0.400 m
AC = b = 0.300 m
BC = c = 0.500 m
Gravitational constant, [tex]G = 6.67 \times 10^{-11} Nm^2/kg^2[/tex]
The formula to calculate gravitational force between two masses is:
[tex]F = G \times m_1 \times m_2 / r^2[/tex]
Where, G = gravitational constant
m₁, m₂ = masses of the two objects
r = distance between the centers of the two objects
To find the force on the mass at the lower right corner due to the other two masses, we can use vector addition.
The force on the mass due to mass A will be: [tex]F_1 = G \times m\times m_1 / AB^2[/tex]
The direction of force F₁ is along the line connecting mass A and the mass at the bottom right corner and is given by
[tex]\theta_1= tan^{-1} (b / a)[/tex]
The force on the mass due to mass B will be:
[tex]F_2= G \times m\times m_2 / BC^2[/tex]
The direction of force F₂ is along the line connecting mass B and the mass at the bottom right corner and is given by
[tex]\theta_2= tan^{-1} (a / b)[/tex]
Now, we can use vector addition to find the net force acting on the mass at the lower right corner.
[tex]F = \sqrt{(F_1^2 + F_2^2 + 2F_1F_2\cos(180^0 - \theta_1 - \theta_2))}[/tex]
The direction of the net force is
[tex]\theta = \tan^{-1}[(F_2\sin\theta_2- F_1\sin\theta_1) / (F_2\cos\theta_2 + F_1cos\theta_1)][/tex]
Substituting the given values in the above formulas:
[tex]F_1= (6.67\times 10^{-11} Nm^2/kg^2) \times (0.300 kg)^2 / (0.400 m)^2\\F_1 = 5.0025 \times 10^{-10} N\\F_2 = (6.67 \times 10^{-11} Nm^2/kg^2) \times (0.300 kg)^2 / (0.500 m)^2\\F_2 = 2.40144 \times 10^{-10} N\\[/tex]
[tex]F = \sqrt(5.0025 \times 10^{-10} N^2 + 2.40144 \times 10^{-10} N^2 + 2(5.0025 \times 10^{-10} N)(2.40144 \times 10^{-10} N) \cos(180\textdegree - 53.1301\textdegree - 36.8699\textdegree))\\
F = 4.588 \times 10^{-10} N\\\
theta = tan^{-1} [(2.40144 \times 10^{-10}N \sin 36.8699\textdegree - 5.0025 \times 10^{-10} N \sin 53.1301\textdegree) / (2.40144 \times 10^{-10} N \cos 36.8699\textdegree + 5.0025 \times 10^{-10} N \cos 53.1301\textdegree)]\\\
theta = 46.03\textdegree[/tex]
Therefore, the magnitude of the net force acting on the mass at the lower right corner due to the other two masses is 4.588 × 10⁻¹⁰ N, and the direction is 46.03°.
To know more about force, visit:
https://brainly.com/question/13191643
#SPJ11
F₁ and F₂ using the given values and then calculate F_net and θ to find the magnitude and direction of the gravitational force acting on the lower right mass.
To calculate the gravitational force acting on the mass at the lower right corner of the triangle due to the other two masses, we can use the equation for gravitational force:
F = (G * m₁ * m₂) / r²
where:
F is the gravitational force,
G is the gravitational constant (6.67 x 10⁽⁻¹¹⁾ Nm²/kg²),
m1 and m2 are the masses, and
r is the distance between the masses.
Given:
G = 6.67 x 10⁽⁻¹¹⁾ Nm²/kg²
Masses:
m₁ = 0.300 kg (mass at the lower left corner)
m₂ = 0.300 kg (mass at the upper corner)
We need to calculate the distances (r) between the masses:
For the side of length a:
r₁ = 0.400 m (distance between the lower left corner and the lower right corner)
For the side of length b:
r₂ = 0.300 m (distance between the lower left corner and the upper corner)
Now, we can calculate the gravitational force between the lower left mass and the lower right mass:
F₁ = (G * m₁ * m₂) / r1²
= (6.67 x 10⁽⁻¹¹⁾ Nm²/kg²) * (0.300 kg) * (0.300 kg) / (0.400 m)²
F1 = (6.67 x 10⁽⁻¹¹⁾) * (0.300) * (0.300) / (0.400)² N
Similarly, we can calculate the gravitational force between the upper mass and the lower right mass:
F₂ = (G * m₁ * m₂) / r²
= (6.67 x 10⁽⁻¹¹⁾ Nm²/kg²) * (0.300 kg) * (0.300 kg) / (0.300 m)²
F₂ = (6.67 x 10^⁽⁻¹¹⁾) * (0.300) * (0.300) / (0.300)² N
Now, we can find the net gravitational force acting on the lower right mass by adding these two forces as vectors:
F_net = sqrt(F₁ + F₂)
The direction of the net gravitational force can be found by calculating the angle it makes with the positive x-axis:
θ = arctan(F₂ / F₁)
Calculate F₁ and F₂ using the given values and then calculate F_net and θ to find the magnitude and direction of the gravitational force acting on the lower right mass.
To know more about magnitude, visit:
https://brainly.com/question/28714281
#SPJ11
At t=0s a small "upward" (positive y) pulse centered at x = 5.0 m is moving to the right on a string with fixed ends at x=0.0m and x = 15.0 m . The wave speed on the string is 4.5 m/s .
At what time will the string next have the same appearance that it did at t=0st=0s?
Express your answer in seconds.
The string will next have the same appearance as it did at t=0s after approximately 2.22 seconds.
The string will next have the same appearance as it did at t=0s when the pulse completes a round trip from x=5.0m to x=5.0m, which corresponds to a distance of 10.0m on the string.
The wave speed on the string is given as 4.5 m/s. To determine the time it takes for the pulse to complete a round trip, we need to find the time it takes for the pulse to travel a distance of 10.0m on the string.
The distance traveled by the pulse can be calculated using the formula:
Distance = Speed × Time
Substituting the given values, we have:
10.0m = 4.5 m/s × Time
Solving for Time, we get:
Time = 10.0m / 4.5 m/s = 2.22s
To learn more about strings -
brainly.com/question/28047359
#SPJ11
An electron that is moving through a uniform magnetic held has velocity 7 = 40.0 km/sli+ /33 0km/s) 7 when it experiences
a force h = (421 are + (stor) " due to the maenetic held. If B, = 0, calculate the magnetic held B
The magnetic field B is approximately -1.32 x 10^-3 Tesla in the ar direction.
To calculate the magnetic field B, we can use the formula for the magnetic force experienced by a charged particle:
F = qvB
where F is the magnetic force, q is the charge of the particle, v is its velocity, and B is the magnetic field.
In this case, the force experienced by the electron is given as F = (421 ar + 8°) N.
We know that the charge of an electron is q = -1.6 x 10^-19 C (negative because it's an electron).
The velocity of the electron is given as v = (40.0 km/s)i + (33.0 km/s)j = (40.0 x 10^3 m/s)i + (33.0 x 10^3 m/s)j.
Comparing the components of the force equation, we have:
421 = qvB (in the ar direction)
0 = qvB (in the θ direction)
For the ar component:
421 = (-1.6 x 10^-19 C)(40.0 x 10^3 m/s)B
Solving for B:
B = 421 / [(-1.6 x 10^-19 C)(40.0 x 10^3 m/s)]
Similarly, for the θ component:
0 = (-1.6 x 10^-19 C)(33.0 x 10^3 m/s)B
However, since the θ component is zero, we don't need to solve for B in this direction.
Calculating B for the ar component:
B = 421 / [(-1.6 x 10^-19 C)(40.0 x 10^3 m/s)]
B ≈ -1.32 x 10^-3 T
So, the magnetic field B is approximately -1.32 x 10^-3 Tesla in the ar direction.
Visit here to learn more about magnetic field brainly.com/question/19542022
#SPJ11
Current Attempt in Progress = The circuit in the figure consists of switch S, a 6.00 V ideal battery, a 35.0 M92 resistor, and an airfilled capacitor. The capacitor has parallel circular plates of radius 6.00 cm, separated by 1.50 mm. At time t = 0, switch S is closed to begin charging the capacitor. The electric field between the plates is uniform. At t = 230 us, what is the magnitude of the magnetic field within the capacitor, at radial distance 2.40 cm? = Number i Units
To calculate the current, we use the formula I = V/R exp(-t/τ), where V is the voltage across the capacitor, R is the resistance in the circuit, t is the time, and τ is the time constant.
The magnetic field within the air-filled capacitor can be determined using the formula B = μ₀I/(2r), where μ₀ is the permeability of free space, I is the current flowing in the circuit, and r is the radial distance from the center of the capacitor.
Substituting the given values, we find the capacitance C = 6.64×10⁻¹¹ F and the time constant τ = 2.32×10⁻³ s.
At t = 230 μs, the voltage across the capacitor is V = 0.30 V.
Using the formula I = V/R exp(-t/τ), we calculate the current I = 6.75×10⁻⁹ A.
Substituting the values of μ₀, I, and r into B = μ₀I/(2r), we find the magnetic field B = 9.98 × 10⁻⁹ T.
Therefore, the magnitude of the magnetic field within the capacitor, at a radial distance of 2.40 cm, at time t = 230 μs is 9.98 × 10⁻⁹ T.
To learn more about magnetic field, you can visit the following link:
brainly.com/question/29731324
#SPJ11
The power of a toaster can be determined if which of the following values are known? A the dimensions of the toaster B C the resistance of the toaster's insulation the voltage applied to the toaster and the toaster's temperature D the current through the circuit and the voltage applied to the toaster
The power of a toaster can be determined if the current through the circuit and the voltage applied to the toaster are known. The correct answer is option d.
Power (P) is calculated using the formula P = I × V, where I represents the current and V represents the voltage. By measuring or obtaining these values, the power consumption of the toaster can be determined. The current can be measured using an ammeter, and the voltage can be measured using a voltmeter.
Once these measurements are obtained, simply multiply the current and voltage values together to calculate the power. This information is crucial for understanding the toaster's energy consumption, as it allows you to assess its efficiency and make comparisons with other devices.
The correct answer is option d.
To know more about voltage refer to-
https://brainly.com/question/32002804
#SPJ11
This is the same data for an LRC Circuit as the previous problem: An damped oscillatory circuit has the following components: Inductance = 12 milliHenry, Capacitance = 1.6 microFarad, Resistance 1.5 Ohms. During the time it take the amplitude of the charge separation on the capacitor to decay from 0.4 microCoulomb to 0.1 microCoulomb, about how many oscillations happened? about 16 about 26 about 57 about 204
The number of oscillations that occurred in the LRC circuit is approximately 57.
In an LRC circuit, the oscillations occur due to the interplay between the inductance (L), capacitance (C), and resistance (R) of the circuit. The decay of the charge separation on the capacitor can be used to determine the number of oscillations that occurred.
The time it takes for the amplitude of the charge separation to decay from 0.4 microCoulomb to 0.1 microCoulomb is directly related to the damping of the circuit. In an underdamped circuit, the amplitude decreases exponentially with time, and the rate of decay is influenced by the number of oscillations.
To calculate the number of oscillations, we need to determine the decay factor of the charge separation. The decay factor, denoted as ζ (zeta), is given by the ratio of the time constant of the circuit (τ) to the period of oscillation (T). In an underdamped circuit, ζ is less than 1.
The time constant (τ) of an LRC circuit is given by the formula τ = 2π(LC)^0.5, where L is the inductance and C is the capacitance. Substituting the given values, we can find τ.
Once we have τ, we can calculate the period of oscillation (T) using the formula T = 2π(LC - R^2/4L^2)^0.5. Substituting the given values, we can find T.
Finally, we can calculate the decay factor (ζ) by dividing τ by T.
With the decay factor (ζ) known, we can approximate the number of oscillations (N) using the formula N = ln(initial amplitude/final amplitude)/ln(ζ). Substituting the given values, we can find N, which is approximately 57.
Learn more about LRC circuit
brainly.com/question/31565356
#SPJ11
At a certain point in space, the electric and magnetic fields of an electromagnetic wave at a certain instant are given by È = i(6×10³ V/m) B = Â(2×10¹³ T) This wave is propagating in the A. positive x-direction. B. negative x-direction. C. positive y-direction. D. negative y-direction. E. unknown direction.
The electromagnetic wave is propagating in the negative x-direction. Therefore, the answer is B. negative x-direction.
The given electric and magnetic fields of an electromagnetic wave can be represented as È = i(6×10³ V/m) and B = Â(2×10¹³ T), respectively. To determine the direction of propagation, we can examine the relationship between the electric and magnetic fields.
Since the electric field is in the i-direction (x-direction) and the magnetic field is in the Â-direction (y-direction), their cross product would yield a direction perpendicular to both fields, which is in the negative z-direction. Therefore, the electromagnetic wave is propagating in the negative x-direction.
In an electromagnetic wave, the electric and magnetic fields are perpendicular to each other and to the direction of propagation. The cross product of the electric and magnetic fields gives the direction of propagation according to the right-hand rule.
In this case, the electric field È is given as i(6×10³ V/m), where the unit vector i represents the x-direction. The magnetic field B is given as Â(2×10¹³ T), where the unit vector  represents the y-direction.
To find the direction of propagation, we take the cross product of È and B: È x B. Using the right-hand rule, we place our right hand with the index finger pointing in the direction of È (x-direction) and the middle finger pointing in the direction of B (y-direction). The thumb will then point in the direction of propagation.
Since the cross product of the i-direction and Â-direction is in the negative z-direction, the electromagnetic wave is propagating in the negative x-direction. Therefore, the answer is B. negative x-direction.
learn more about electromagnetic wave here:
brainly.com/question/29774932
#SPJ11
Planet Z is 1.00×10 km in diameter. The free-tall acceleration on Planet Zi 8.00m/² You may want to review (Pages 342-343) Part A What is the mass of Planet Z? Express your answer to two significant figures and include the appropriate units. 20 m= Value Units Submit Request Answer Part B What is the free-fall acceleration 5000 km above Planet Z's north pole? Express your answer to two significant figures and include the appropriate units. PA 4 -0 ? Value Submit Provide Feedback Request Answer Units Revies
The mass of Planet Z is approximately 2.40×10^26 kg, given its diameter and free-fall acceleration. The free-fall acceleration 5000 km above Planet Z's north pole is approximately 9.68 m/s² using the formula for acceleration due to gravity at a certain height above the planet's surface.
Part A:
The mass of Planet Z can be calculated using the formula for the acceleration due to gravity, which is:
g = G(M/Z) / r^2
Given that the diameter of Planet Z is 1.00×10 km, its radius Z is 5.00×10 km or 5.00×10^7 m. The free-fall acceleration on Planet Z is 8.00 m/s². Substituting these values into the formula, we get:
8.00 m/s² = (6.67×10^-11 N(m/kg)^2) (M/Z) / (5.00×10^7 m)^2
Solving for M/Z, we get:
M/Z = (8.00 m/s²) (5.00×10^7 m)^2 / (6.67×10^-11 N(m/kg)^2)
M/Z = 2.40×10^26 kg
Since the mass of the planet is equal to M, we can conclude that the mass of Planet Z is approximately 2.40×10^26 kg, rounded to two significant figures.
Therefore, the mass of Planet Z is 2.40×10^26 kg.
Part B:
To calculate the free-fall acceleration 5000 km above Planet Z's north pole, we can use the formula:
g' = g (R/Z)^2
Since the height above the surface is 5000 km, the distance R is:
R = Z + h
R = 5.00×10^7 m + 5.00×10^6 m
R = 5.50×10^7 m
Substituting the given values into the formula, we get:
g' = 8.00 m/s² (5.50×10^7 m / 5.00×10^7 m)^2
g' = 9.68 m/s²
Therefore, the free-fall acceleration 5000 km above Planet Z's north pole is approximately 9.68 m/s², rounded to two significant figures.
To know more about acceleration due to gravity, visit:
brainly.com/question/13860566
#SPJ11
A proton moves around a circular path (radius =2.0 mm ) in a uniform 0.25-T magnetic field. Show that the total distance this proton travels during a 1.0-s time interval is about 48 km.(m p =1.67×10 −27 kg,q p =1.6×10 −19 C)
The total distance traveled by the proton during a 1.0-s time interval is about 48 km.
The velocity of the proton:
v = qB / m
= 1.6 × 10^-19 C * 0.25 T / 1.67 × 10^-27 kg
= 2.2 × 10^6 m/s
Now, we can find the distance traveled by the proton in 1 second:
d = vt
= 2.2 × 10^6 m/s * 1 s
= 2.2 × 10^6 m
This is equal to about 48 km.
* Proton mass: 1.67 × 10^-27 kg
* Proton charge: 1.6 × 10^-19 C
* Magnetic field strength: 0.25 T
* Proton radius: 2.0 mm = 2.0 × 10^-3 m
* Time interval: 1.0 s
* Total distance traveled by the proton during a 1.0-s time interval
1. The velocity of the proton:
v = qB / m
= 1.6 × 10^-19 C * 0.25 T / 1.67 × 10^-27 kg
= 2.2 × 10^6 m/s
2. The distance traveled by the proton in 1 second:
d = vt
= 2.2 × 10^6 m/s * 1 s
= 2.2 × 10^6 m
This is equal to about 48 km.
Therefore, the total distance traveled by the proton during a 1.0-s time interval is about 48 km.
Learn more about proton with the given link,
https://brainly.com/question/1481324
#SPJ11
A digital cell phone emits 0.60 W atts of 1.9 GH z = 1.9 × 109 H z radio waves. (Assume the waves arepassing through air so that their speed is effectively the vacuum speed of light). At a distance of 10 cm = 0.1 m from the cell phone,
(a.) What is the amplitude of the electric field?
(b.) What is the amplitude of the magnetic field?
(c.) What is the wavelength?
(d.) Considering what you know (intensity, frequency, wavelength), etc. about these EM waves emitted by the cell phone, do you think the EM waves radiating from your phone are capable of causing bodily harm to a cell phone user? Hint: Use the Electromagnetic Spectrum Rules of Thumb we gave in class to argue about how the frequency, wavelength, energy, etc. of the waves might contribute to this scenario.
Please show all work
A digital cell phone emits 0.60 W atts of 1.9 GHz = 1.9 × 10⁹ Hz radio waves. (Assume the waves are passing through air so that their speed is effectively the vacuum speed of light). At a distance of 10 cm = 0.1 m from the cell phone,
(a.) The amplitude of the electric field is 35.33 V/m.
(b.) The amplitude of the magnetic field is 1.18 × 10⁻⁷ T.
(c.) The wavelength is 0.158 m.
(d.) The EM radiated from your phone are not capable of causing bodily harm to a cell phone user.
(a) To find the amplitude of the electric field, we can use the formula:
E = √(2P / (ε₀c))
where P is the power, ε₀ is the permittivity of free space, and c is the speed of light.
Given that P = 0.60 W and c ≈ 3.00 × 10⁸ m/s, we can substitute these values into the formula:
E = √(2 × 0.60 / (8.85 × 10⁻¹² × 3.00 × 10⁸))
Calculating this expression, we find:
E ≈ 35.33 V/m
Therefore, the amplitude of the electric field is approximately 35.33 V/m.
(b) The amplitude of the magnetic field (B) can be determined using the relationship between the electric field and the magnetic field in an electromagnetic wave:
B = E / c
Substituting the value of the electric field amplitude (E) and the speed of light (c), we get:
B = 35.33 / (3.00 × 10⁸)
Calculating this expression, we find:
B ≈ 1.18 × 10⁻⁷ T
Therefore, the amplitude of the magnetic field is approximately 1.18 × 10⁻⁷ T.
(c) The wavelength (λ) of the wave can be calculated using the formula:
λ = c / f
where c is the speed of light and f is the frequency.
Given that the frequency (f) is 1.9 × 10⁹ Hz, we can substitute the values into the formula:
λ = (3.00 × 10⁸) / (1.9 × 10⁹)
Calculating this expression, we find:
λ ≈ 0.158 m
Therefore, the wavelength is approximately 0.158 m.
(d) Based on the given information about the frequency, wavelength, and intensity of the waves emitted by the cell phone, it is unlikely that they would cause bodily harm to a cell phone user. The frequency of 1.9 GHz falls within the range of radio waves, which generally have lower energy and are considered non-ionizing radiation. Non-ionizing radiation is generally regarded as safe and does not have enough energy to cause direct damage to cells or DNA. Additionally, the intensity of the radiation emitted by the cell phone (0.60 W) is relatively low and within the regulatory limits set for mobile devices. However, it's important to note that long-term exposure to radio waves or the use of cell phones near sensitive tissues (such as the eyes or reproductive organs) should still be avoided as a precautionary measure.
To know more about speed here
https://brainly.com/question/6280317
#SPJ4
two identical metallic spheres each is supported on an insulating stand. the fiest sphere was charged to +5Q and the second was charged to -7Q. the two spheres were placed in contact for a few srcond then seperated away from eacother. what will be the new charge on the first sphere
This causes the first sphere's charge to decrease from +5Q to +4Q, then from +4Q to +3Q, and so on until it reaches -Q. Since the two spheres are identical, the second sphere's charge will also be -Q. Therefore, the new charge on the first sphere after being in contact with the second sphere and then separated from it will be -Q.
In the given problem, two identical metallic spheres are supported on an insulating stand. The first sphere was charged to +5Q and the second was charged to -7Q. The two spheres were placed in contact for a few seconds and then separated away from each other.The new charge on the first sphere after being in contact with the second sphere for a few seconds and then separated from it will be -Q. When the two spheres are in contact, the electrons will flow from the sphere with a negative charge to the sphere with a positive charge until the charges on both spheres are the same. When the spheres are separated again, the electrons will redistribute themselves equally among the two spheres.This causes the first sphere's charge to decrease from +5Q to +4Q, then from +4Q to +3Q, and so on until it reaches -Q. Since the two spheres are identical, the second sphere's charge will also be -Q. Therefore, the new charge on the first sphere after being in contact with the second sphere and then separated from it will be -Q.
To know more about sphere's visit:
https://brainly.com/question/22849345
#SPJ11