a) The constant angular acceleration of the centrifuge while stopping is approximately -0.337 rad/s^2.
b) The centrifuge takes about 59.24 seconds to come to rest.
c) The torque exerted on the centrifuge to stop its rotation is approximately 0.140 Nm.
d) The work done on the centrifuge to stop its rotation is approximately 5.88 J.
a) To find the constant angular acceleration of the centrifuge while it is stopping, we can use the formula:
ω^2 = ω₀^2 + 2αθ
where ω is the final angular velocity, ω₀ is the initial angular velocity, α is the angular acceleration, and θ is the angular displacement.
Given that the centrifuge rotates 20.0 times in the clockwise direction before coming to rest, we can convert this to radians by multiplying by 2π:
θ = 20.0 * 2π
The final angular velocity is zero, as the centrifuge comes to rest, and the initial angular velocity can be calculated by converting the given constant angular speed from rpm to rad/s:
ω₀ = 3950 X (2π/60)
Now we can rearrange the formula and solve for α:
α = (ω^2 - ω₀^2) / (2θ)
Substituting the known values, we find that the constant angular acceleration is approximately -0.337 rad/s^2.
b) The time taken for the centrifuge to come to rest can be determined using the formula:
ω = ω₀ + αt
Rearranging the formula and solving for t:
t = (ω - ω₀) / α
Substituting the known values, we find that the centrifuge takes about 59.24 seconds to come to rest.
c) The torque exerted on the centrifuge to stop its rotation can be calculated using the formula:
τ = Iα
where τ is the torque, I is the moment of inertia, and α is the angular acceleration.
Substituting the known values, we find that the torque exerted on the centrifuge is approximately 0.140 Nm.
d) The work done on the centrifuge to stop its rotation can be determined using the formula:
W = (1/2) I ω₀^2
where W is the work done, I is the moment of inertia, and ω₀ is the initial angular velocity.
Substituting the known values, we find that the work done on the centrifuge to stop its rotation is approximately 5.88 J.
To learn more about torque here brainly.com/question/30338175
#SPJ11
Displacement d, is in the yz plane 58.8 ° from the positive direction of the y axis, has a positive z component, and has a magnitude of 3.52 m. Displacement d2 is in the xz plane 26.2 ° from the positive direction of the x axis, has a positive z component, and has magnitude 2.07 m. What are (a) d₁d₂, (b) the x component of d₁ × d₂, (c) the . X X y component of d₁ × d₂, (d) the z component of d₁ x d₂, and (e) the angle between d, and d₂ ?
(a) d₁d₂ = -5.56 m²
(b) The x component of d₁ × d₂ = -3.08 m²
(c) The y component of d₁ × d₂ = 0 m²
(d) The z component of d₁ × d₂ = 1.98 m²
(e) The angle between d₁ and d₂ = 31.8°
The given problem involves two displacements, d₁ and d₂, specified in terms of their magnitude, direction, and components. To solve the various parts of the question, we need to use vector operations.
(a) The product of two displacements, d₁d₂, is calculated by multiplying their magnitudes and taking the cosine of the angle between them. Since the angle between d₁ and d₂ is not given directly, we can find it by subtracting the given angles from 180°. Using the formula, d₁d₂ = (3.52 m) * (2.07 m) * cos(180° - 58.8° - 26.2°), we can calculate the value as -5.56 m².
(b) The x component of the cross product of d₁ and d₂ can be obtained using the formula, (d₁ × d₂)x = (d₁y * d₂z) - (d₁z * d₂y). Here, d₁y represents the y component of d₁, and d₂z represents the z component of d₂. Substituting the given values, we have (-3.52 m * sin(58.8°)) * (2.07 m * sin(26.2°)), which evaluates to -3.08 m².
(c) The y component of the cross product of d₁ and d₂, (d₁ × d₂)y, is given by (d₁z * d₂x) - (d₁x * d₂z). As both d₁ and d₂ have zero x components, the y component of their cross product will also be zero.
(d) The z component of the cross product of d₁ and d₂, (d₁ × d₂)z, is calculated as (d₁x * d₂y) - (d₁y * d₂x). Here, d₁x represents the x component of d₁, and d₂y represents the y component of d₂. Plugging in the given values, we get (3.52 m * cos(58.8°)) * (2.07 m * sin(26.2°)), which simplifies to 1.98 m².
(e) To find the angle between d₁ and d₂, we can use the dot product formula, d₁ · d₂ = |d₁| |d₂| cos θ, where θ is the angle between the two displacements. Rearranging the equation, we have cos θ = (d₁ · d₂) / (|d₁| |d₂|). Substituting the values, cos θ = (3.52 m * 2.07 m * cos(58.8°) * cos(26.2°)) / (3.52 m * 2.07 m), and solving for θ, we find the angle between d₁ and d₂ to be 31.8°.
Learn more about x component
brainly.com/question/29030586
#SPJ11
If two capacitors are connected in series, the equivalent capacitance of the two capacitors is each of the individual capacitors. a. the same as b. the sum of c. less than d. greater than If a proton
If two capacitors are connected in series, the equivalent capacitance of the two capacitors is less than each of the individual capacitors.
When capacitors are connected in series, their total capacitance decreases. The equivalent capacitance of a combination of two capacitors in series is less than the individual capacitance of either capacitor. This is because the voltage across each capacitor is identical, and the total voltage of the combination is split between them.How is the equivalent capacitance of capacitors connected in series calculated?For two capacitors in series, the equivalent capacitance can be calculated using the following formula:
1/CTotal = 1/C1 + 1/C2
Where CTotal is the equivalent capacitance of the combination and C1 and C2 are the capacitance of the individual capacitors.
This equation implies that as the number of capacitors increases in series, the equivalent capacitance decreases. And if all the capacitors are of the same value, the equivalent capacitance can be calculated as:
Ceq = C/n where C is the capacitance of each capacitor and n is the total number of capacitors.
Thus, if two capacitors are connected in series, the equivalent capacitance of the two capacitors is less than each of the individual capacitors.
Learn more about equivalent capacitance https://brainly.com/question/30905469
#SPJ11
What quantum numbers are needed to give a complete
description of the quantum state of an electron in an atom?
(b) List the value of each of the quantum numbers mentioned in (a) for each of the
electrons in a neutral strontium atom (Z = 38) in its ground state.
The values of the quantum numbers for each electron in a neutral strontium atom (Z = 38) in its ground state are determined by the electron configuration and the rules governing the filling of electron orbitals.
To give a complete description of the quantum state of an electron in an atom, the following quantum numbers are needed:
Principal Quantum Number (n): It determines the energy level and average distance of the electron from the nucleus. Its values are positive integers starting from 1.Angular Momentum Quantum Number (ℓ): It determines the shape of the orbital and the magnitude of the orbital angular momentum. Its values range from 0 to (n-1).Magnetic Quantum Number (mℓ): It determines the orientation of the orbital in space. Its values range from -ℓ to ℓ, including 0.Spin Quantum Number (ms): It describes the intrinsic angular momentum or spin of the electron. It can have two possible values: +1/2 (spin-up) or -1/2 (spin-down).Now, let's list the values of each quantum number for the electrons in a neutral strontium atom (Z = 38) in its ground state:
The electronic configuration of strontium (Sr) in its ground state is: 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s²
1. For the 1s² electrons:
- n = 1
- ℓ = 0
- mℓ = 0
- ms = +1/2 (two electrons with opposite spins)
2. For the 2s² electrons:
- n = 2
- ℓ = 0
- mℓ = 0
- ms = +1/2 (two electrons with opposite spins)
3. For the 2p⁶ electrons:
- n = 2
- ℓ = 1
- mℓ = -1, 0, +1
- ms = +1/2 (six electrons with opposite spins)
4. For the 3s² electrons:
- n = 3
- ℓ = 0
- mℓ = 0
- ms = +1/2 (two electrons with opposite spins)
5. For the 3p⁶ electrons:
- n = 3
- ℓ = 1
- mℓ = -1, 0, +1
- ms = +1/2 (six electrons with opposite spins)
6. For the 4s² electrons:
- n = 4
- ℓ = 0
- mℓ = 0
- ms = +1/2 (two electrons with opposite spins)
7. For the 3d¹⁰ electrons:
- n = 3
- ℓ = 2
- mℓ = -2, -1, 0, +1, +2
- ms = +1/2 (ten electrons with opposite spins)
8. For the 4p⁶ electrons:
- n = 4
- ℓ = 1
- mℓ = -1, 0, +1
- ms = +1/2 (six electrons with opposite spins)
9. For the 5s² electrons:
- n = 5
- ℓ = 0
- mℓ = 0
- ms = +1/2 (two electrons with opposite spins)
So, in a neutral strontium atom (Z = 38) in its ground state, there are a total of 38 electrons.
To learn more about neutral strontium atom, Visit:
https://brainly.com/question/2031834
#SPJ11
Question 3 1 pts A photon has a wavelength of 680nm. What is its frequency? O 2.0x10^2 Hz 6.8x10^14 Hz 2.3x10^-15 Hz 4.4x10^14 Hz Question 4 1 pts A certain photon has a wavelength of 680nm. What is i
The frequency of a photon with a wavelength of 680 nm can be calculated using the equation: frequency = speed of light / wavelength. Plugging in the values, the frequency is approximately 4.4 x 10^14 Hz.
The equation c = λ * ν relates the speed of light (c) to the wavelength (λ) and frequency (ν) of a photon. Rearranging the equation, we can solve for the frequency:
ν = c / λ
Given that the wavelength is 680 nm, we need to convert it to meters by dividing by 10^9:
λ = 680 nm = 680 x 10^-9 m
Substituting the values into the equation:
ν = (3 x 10^8 m/s) / (680 x 10^-9 m)
= 4.4 x 10^14 Hz
Therefore, the frequency of the photon is 4.4x10^14 Hz.
Note: The explanation provided assumes the use of the correct values for the speed of light and the given wavelength.Question 3 1 pts A photon has a wavelength of 680nm. What is its frequency? O 2.0x10^2 Hz 6.8x10^14 Hz 2.3x10^-15 Hz 4.4x10^14 Hz Question 4 1 pts A certain photon has a wavelength of 680nm. What is i
To learn more about Wavelength - brainly.com/question/7143261
#SPJ11
A projectile is fired at an angle 45 ° from a gun that is 90 m above the flat ground, emerging
from the gun with a speed of 180 m/s.
(a) How long does the projectile remain in air?
(b) At what horizontal distance from the firing ground does it strike the ground?
(c) What is the maximum height (from ground) reached?
(a) The projectile remains in the air for 20.82 seconds.
(b) The projectile strikes the ground at a horizontal distance of 2,953.33 meters from the firing ground.
(c) The maximum height reached by the projectile from the ground is 1,845.92 meters.
Projectile motion problemTo solve the given problem, we can analyze the projectile motion and use the equations of motion.
Given:
Initial angle of projection (θ) = 45°
Initial speed of the projectile (v0) = 180 m/s
Height of the gun (h) = 90 m
(a) To find the time of flight (T), we can use the equation:
T = (2 * v0 * sin(θ)) / g
Substituting the given values, we get:
T = (2 * 180 * sin(45°)) / 9.8
T ≈ 20.82 s
(b) To find the horizontal distance (R) from the firing ground, we can use the equation:
R = v0 * cos(θ) * T
R = 180 * cos(45°) * 20.82
R ≈ 2,953.33 m
(c) To find the maximum height (H) reached by the projectile, we can use the equation:
H = (v0 * sin(θ))^2 / (2 * g)
Substituting the given values, we get:
H = (180 * sin(45°))^2 / (2 * 9.8)
H ≈ 1,845.92 m
More on projectile motion can be found here: https://brainly.com/question/12860905
#SPJ4
The projectile will remain in the air for 25.65 s, will strike the ground at a horizontal distance of 1645.9 m from the firing ground and will reach a maximum height of 4116.7 m from the ground.
(a) The time projectile will remain in the air, The time of flight, t = 2usinθ/g, where: u is the initial velocity of the projectileθ is the angle at which the projectile is launched from the ground g is the acceleration due to gravity= 2 × 180 sin 45° / 9.8= 25.65 s
(b) The horizontal distance from the firing ground that it strikes the ground, Horizontal range, R = u² sin 2θ / g= 180² sin 90° / 9.8= 1645.9 m
(c) The maximum height (from ground) reached, The maximum height (h) reached, h = u² sin²θ / 2g= 180² sin² 45° / 2 × 9.8= 4116.7 m (approx.)
Learn more about projectile
https://brainly.com/question/28043302
#SPJ11
Charge on String in Electric Field In this problem you must determine the charge on a pith ball that is suspended in a charged capacitor. You will be given the mass of the pith ball, the angle that the string makes with the vertical and the gravitational field of the planet on which this system is located. You will also be told the potential difference between the plates of the capacitor and the distance between the plates of the capacitor. You can ignore edge effects of the capacitor. Finally, you must find the tension in the string holding the pith ball. When you are ready to start this activity, click on the begin button. Begin 1203 Awe Charge on String in Electric Field 1 1 1 1173 V Enter Answers Show Question 1 Charge on String in Electric Field The gravitational field of this planet is 6.7 N/kg The mass of the ball is 393.0 mg. The potential differnece between the plates of the capacitor is 1173 V. The distance between the plates of the capacitor is 52.0 mm. The string makes an angle of 37.82° with the vertical. Determine the tension in the string. Determine the charge on the ball. When you are ready test your answers, hit the 'Enter Answers' Button 1173 V Enter Answers Hide Question Charge on String in Electric Field I Enter Your Answers Below Don't Enter Units Your Name: Charge (nC): Tension (mN): Submit 1173 V Hide Answers Show Question
To determine the tension in the string and the charge on a pith ball suspended in a charged capacitor.
To find the tension in the string, we need to consider the forces acting on the pith ball. There are two forces: the gravitational force and the electrostatic force.
Gravitational Force:
The gravitational force acting on the pith ball can be calculated using the mass of the ball (393.0 mg) and the gravitational field of the planet (6.7 N/kg). We can use the equation F_gravity = m * g, where m is the mass and g is the gravitational field.
F_gravity = (393.0 mg) * (6.7 N/kg)
Electrostatic Force:
The electrostatic force experienced by the pith ball is given by Coulomb's law, which states that the electrostatic force between two charges is proportional to the product of the charges and inversely proportional to the square of the distance between them.
Since the pith ball is suspended in a charged capacitor, the electrostatic force is balanced by the tension in the string. Therefore, the tension in the string is equal to the electrostatic force.
To find the electrostatic force, we need to determine the charge on the pith ball. This can be done by considering the potential difference between the plates of the capacitor and the distance between the plates.
Using the equation V = Ed, where V is the potential difference, E is the electric field, and d is the distance between the plates, we can find the electric field E.
E = V / d
Once we have the electric field, we can calculate the electrostatic force using the equation F_electrostatic = q * E, where q is the charge on the pith ball.
Tension in the String:
Since the tension in the string balances the gravitational force and the electrostatic force, we can equate these forces:
F_gravity = F_electrostatic
From this equation, we can solve for the tension in the string.
Charge on the Ball:
To find the charge on the pith ball, we can rearrange the equation for the electrostatic force:
F_electrostatic = q * E
We already know the electric field E, and we can substitute the calculated tension in the string as the electrostatic force to solve for the charge q.
To learn more about capacitor -
brainly.com/question/32667672
#SPJ11
A slender rod with a length of 0.250 m rotates with an angular speed of 8.10 rad/s about an axis through one end and perpendicular to the rod. The plane of rotation of the rod is perpendicular to a uniform magnetic field with a magnitude of 0.600 T. What is the induced emf in the rod? Express your answer in volts. What is the potential difference between its ends? Express your answer in volts.
The induced emf in the rod rotating with an angular speed of 8.10 rad/s in a perpendicular magnetic field of magnitude 0.600 T is 4.86 V, and the potential difference between its ends is also 4.86 V.
When a conducting rod moves perpendicular to a magnetic field, an induced emf is generated in the rod according to Faraday's law of electromagnetic induction.
The induced emf in the rod can be calculated using the equation:
emf = B * L * ω
where B is the magnetic field strength, L is the length of the rod, and ω is the angular speed.
B = 0.600 T (magnetic field strength)
L = 0.250 m (length of the rod)
ω = 8.10 rad/s (angular speed)
Substituting the given values into the equation:
emf = 0.600 * 0.250 * 8.10 = 4.86 V
learn more about EMF here:
https://brainly.com/question/16764848
#SPJ11
A baq of suqar weighs 2 lbon Earth. What would it weigh in newtons on the Moon, where the free-fall acceleration is one-sixth that on Earth?
The bag of sugar would weigh approximately 1.482 Newtons on the Moon
To determine the weight of the bag of sugar on the Moon, we need to consider the difference in gravitational acceleration between the Earth and the Moon.
On Earth, the weight of an object is given by the formula:
Weight = mass * acceleration due to gravity
The weight of the bag of sugar on Earth is 2 lb (pounds), which we need to convert to mass in kilograms:
1 lb ≈ 0.4536 kg
So, the mass of the bag of sugar is approximately:
2 lb * 0.4536 kg/lb ≈ 0.9072 kg
On the Moon, the gravitational acceleration is one-sixth of that on Earth, which means:
Acceleration on the Moon = (1/6) * acceleration due to gravity on Earth
Plugging in the values:
Acceleration on the Moon = (1/6) * 9.81 m/s² ≈ 1.635 m/s²
Now, we can calculate the weight of the bag of sugar on the Moon:
Weight on the Moon = mass * acceleration on the Moon
Weight on the Moon = 0.9072 kg * 1.635 m/s²
Weight on the Moon ≈ 1.482 N
Therefore, The bag of sugar would weigh approximately 1.482 Newtons on the Moon.
Learn more about Newtons here:
https://brainly.in/question/5611862
#SPJ11
3) Which of the below indicates that the collision is elastic? Objects are hotter after collision Both objects get stuck together after collision No correct choice is available in the list Objects are deformed after collision
The correct choice that indicates an elastic collision is: "No correct choice is available in the list."
An elastic collision is defined as a collision where kinetic energy is conserved, and the objects rebound without any loss of energy. In an elastic collision, the objects involved do not become hotter, get stuck together, or deform.
"Objects are hotter after collision": In an elastic collision, the total kinetic energy of the system remains the same before and after the collision. If the objects become hotter after the collision, it implies an increase in their internal energy, which would indicate that energy was not conserved. Therefore, an increase in temperature would suggest an inelastic collision, not an elastic one.
"Both objects get stuck together after collision": If the objects stick together and move as a single unit after the collision, it suggests that there was a loss of kinetic energy during the collision. In an elastic collision, the objects separate after the collision, maintaining their individual identities and velocities. Therefore, objects getting stuck together implies an inelastic collision, not an elastic one.
Learn more about collision here : brainly.com/question/13138178
#SPJ11
A 1.65 kg book is sliding along a rough horizontal surface. At point A it is moving at 3.22 m/s , and at point B it has slowed to 1.47 m/s.
How much work was done on the book between A and B? If -0.660 J of work is done on the book from B to C, how fast is it moving at point C? How fast would it be moving at C if 0.660 J of work were done on it from B to C?
The work done between points A and B is -6.159 J. The book is moving at approximately 1.214 m/s at point C when -0.660 J of work is done on it from point B and if 0.660 J of work were done on the book from point B to point C, it would be moving at approximately 1.968 m/s at point C.
Given:
m, the mass of the book = 1.65 kg
v₁, velocities at points A = 3.22 m/s
v₂, velocity = 1.47 m/s
The work done on an object is equal to its change in kinetic energy.
W = ΔKE
ΔKE: change in kinetic energy.
ΔKE = KE₂ - KE₁
KE₁: initial kinetic energy
KE₂: final kinetic energy.
Calculating the initial and final kinetic energies:
KE₁ = (1/2) × m × v₁²
KE₂ = (1/2) × m × v₂²
Calculating the initial and final kinetic energies:
KE₁ = (1/2) × 1.65 × (3.22)²
KE₁ = 8.034 J
KE₂ = (1/2) × 1.65 × (1.47)²
KE₂ = 1.875 J
The work done between points A and B:
W = ΔKE = KE₂ - KE₁
W = 1.875 - 8.034
W = -6.159 J
Calculating the final kinetic energy at point C (KE₃). Assuming the book starts from rest at point B:
KE₃ = KE₂ + ΔKE
KE₃ = 1.875 - 0.660
KE₃ = 1.215 J
Finding the velocity at point C (v₃)
KE₃ = (1/2) × m × v₃²
1.215 = (1/2) × 1.65 × v₃²
v₃² = (2 ×1.215) / 1.65
v₃≈ √1.4727
v₃ ≈ 1.214 m/s
Calculating the final kinetic energy (KE₃) and velocity (v₃) at point C:
W = ΔKE
KE₃ = KE₂ + ΔKE
KE₃ = 2.535 J
v₃² = (2 × 2.535) / 1.65
v₃ ≈ √3.8727
v₃ ≈ 1.968 m/s
Therefore, the correct answers are -6.159 J, 1.214 m/s, and 1.968 m/s respectively.
To know more about Kinetic energy, click here:
https://brainly.com/question/999862
#SPJ4
10. A hydrogen atom has its electron in the n=3 state. a) What is the radius of the orbit of this electron? 15pts b)If the electron makes a transition to the n=2 by giving off a photon, what is the frequency of the emitted photon? 112pts
a) The radius of the electron orbit in the n=3 state of a hydrogen atom is 1.587 Å.
b) The frequency of the emitted photon during a transition from n=3 to n=2 is approximately 4.57 x 10^14 Hz.
a) To determine the radius of the orbit of the electron in the n=3 state, we can use the formula for the Bohr radius:
r = (0.529 Å) * n^2 / Z
where n is the principal quantum number and Z is the atomic number. For a hydrogen atom (Z=1) with n=3, the radius is calculated as follows:
r = (0.529 Å) * 3^2 / 1
r= 1.587 Å.
b) When the electron transitions from the n=3 to the n=2 state, it emits a photon. The energy of the photon can be calculated using the formula:
ΔE = -13.6 eV * (1/n_f^2 - 1/n_i^2)
where n_f is the final quantum number (n=2) and n_i is the initial quantum number (n=3).
ΔE = -13.6 eV * (1/2^2 - 1/3^2) = 1.89 eV.
The frequency of the emitted photon can be calculated using the equation:
E = h * f
where E is the energy of the photon, h is Planck's constant (6.626 x 10^-34 J·s), and f is the frequency.
Converting the energy to joules:
1 eV = 1.6 x 10^-19 J
1.89 eV = 1.89 x 1.6 x 10^-19 J = 3.024 x 10^-19 J.
Plugging in the values:
3.024 x 10^-19 J = 6.626 x 10^-34 J·s * f
Solving for f, the frequency of the emitted photon:
f = (3.024 x 10^-19 J) / (6.626 x 10^-34 J·s)
f ≈ 4.57 x 10^14 Hz.
To learn more about Bohr radius: https://brainly.com/question/31131977
#SPJ11
1. Solve y' += 2 using Integrating Factor 2. Solve y²dy = x² - xy using Homogenous Equation
To solve y' + 2 = 0 using an integrating factor, we multiply by e^(2x) and integrate. To solve y^2dy = x^2 - xy using a homogeneous equation, we substitute y = vx and solve a separable equation.
1. To solve y' + 2 = 0 using an integrating factor, we first rewrite the equation as y' = -2. Then, we multiply both sides by the integrating factor e^(2x):
e^(2x)*y' = -2e^(2x)
We recognize the left-hand side as the product rule of (e^(2x)*y)' and integrate both sides with respect to x:
e^(2x)*y = -e^(2x)*C1 + C2
where C1 and C2 are constants of integration. Solving for y, we get:
y = -C1 + C2*e^(-2x)
where C1 and C2 are arbitrary constants.
2. To solve y^2dy = x^2 - xy using a homogeneous equation, we first rewrite the equation in the form:
dy/dx = (x^2/y - x)
This is a homogeneous equation because both terms have the same degree of homogeneity (2). We then substitute y = vx and dy/dx = v + xdv/dx into the equation, which gives:
v + xdv/dx = (x^2)/(vx) - x
Simplifying, we get:
vdx/x = (1 - v)dv
This is a separable equation that we can integrate to get:
ln|x| = ln|v| - v + C
where C is the constant of integration. Rearranging and substituting back v = y/x, we get:
ln|y| - ln|x| - y/x + C = 0
This is the general solution of the homogeneous equation.
know more about integrating factor here: brainly.com/question/32554742
#SPJ11
Question 32 of 37 > Attempt Consider the inelastic collision. Two lumps of matter are moving directly toward each other. Each lump has a mass of 1,500 kg and is moving at a spoed of 0.880. The two lumps collide and stick together. Answer the questions, keeping in mind that relativistic effects cannot be neglected in this case. What is the final speed of the combined lump, expressed as a fraction of e? 0.44 = incorrect What is the final mass me of the combined lump immediately after the collision, assuming that there has not yet been significant energy loss due to radiation or fragmentation? ks 2.45 m = incorrect
In an inelastic collision between two lumps of matter, each with a mass of 1,500 kg and a speed of 0.880, the final speed of the combined lump is not 0.44 times the speed of light (e). The final mass of the combined lump immediately after the collision is not 2.45 m.
Final Speed: The final speed of the combined lump in an inelastic collision cannot be determined using the given information.
It requires additional data, such as the nature of the collision and the relative velocities of the lumps. Without this information, it is not possible to calculate the final speed as a fraction of the speed of light (e).
Final Mass: The final mass of the combined lump can be calculated by adding the individual masses together.
Since both lumps have a mass of 1,500 kg, the combined mass of the lump immediately after the collision would be 3,000 kg. There is no indication of a factor or value (2.45 m) that affects the calculation of the final mass, so it remains at 3,000 kg.
To learn more about inelastic collision
Click here brainly.com/question/14521843
#SPJ11
If you could please include the formulas needed and explain how to get the answer I would appreciate it so I can learn this type of problem.
A string has both ends fixed. The string is vibrated at a variable frequency. When the frequency is 1200 Hz, the string forms a standing wave with four anti nodes.
(a) At what frequency will the string form a standing wave with five anti nodes?
(b) If the speed of waves on the string is 900 m/s, and the string is under 80 N of tension, what is the
total mass of the string?
The frequency of the wave when there are five anti nodes is 14400 Hz. The total mass of the string is 2.12 x 10⁻⁴ kg.
a) The standing wave that the string forms has anti nodes. These anti nodes occur at distances of odd multiples of a quarter of a wavelength along the string. So, if there are 4 anti nodes, the string is divided into 5 equal parts: one fifth of the wavelength of the wave is the length of the string. Let λ be the wavelength of the wave corresponding to the 4 anti-nodes. Then, the length of the string is λ / 5.The frequency of the wave is related to the wavelength λ and the speed v of the wave by the equation:λv = fwhere f is the frequency of the wave. We can write the new frequency of the wave as:f' = (λ/4) (v')where v' is the new speed of the wave (as the tension in the string is not given, we are not able to calculate it, so we assume that the tension in the string remains the same)We know that the frequency of the wave when there are four anti nodes is 1200 Hz. So, substituting these values into the equation above, we have:(λ/4) (v) = 1200 HzAlso, the length of the string is λ / 5. Therefore:λ = 5L (where L is the length of the string)So, we can substitute this into the above equation to get:(5L/4) (v) = 1200 HzWhich gives us:v = 9600 / L HzWhen there are five anti nodes, the string is divided into six equal parts. So, the length of the string is λ / 6. Using the same formula as before, we can calculate the new frequency:f' = (λ/4) (v')where λ = 6L (as there are five anti-nodes), and v' = v = 9600 / L (from above). Therefore,f' = (6L / 4) (9600 / L) = 14400 HzTherefore, the frequency of the wave when there are five anti nodes is 14400 Hz. Thus, the answer to part (a) is:f' = 14400 Hz
b) The speed v of waves on a string is given by the equation:v = √(T / μ)where T is the tension in the string and μ is the mass per unit length of the string. Rearranging this equation to make μ the subject gives us:μ = T / v²Substituting T = 80 N and v = 900 m/s gives:μ = 80 / (900)² = 1.06 x 10⁻⁴ kg/mTherefore, the mass per unit length of the string is 1.06 x 10⁻⁴ kg/m. We need to find the total mass of the string. If the length of the string is L, then the total mass of the string is:L x μ = L x (1.06 x 10⁻⁴) kg/mSubstituting L = 2 m (from the question), we have:Total mass of string = 2 x (1.06 x 10⁻⁴) = 2.12 x 10⁻⁴ kgTherefore, the total mass of the string is 2.12 x 10⁻⁴ kg.
Learn more about frequency:
https://brainly.com/question/29739263
#SPJ11
Please show working out.
2. A mass of a liquid of density \( \rho \) is thoroughly mixed with an equal mass of another liquid of density \( 2 \rho \). No change of the total volume occurs. What is the density of the liquid mi
When equal masses of a liquid with density ρ and another liquid with density 2ρ are mixed, the resulting liquid mixture has a density of 4/3ρ. Thus, option A, 4/3ρ, is the correct answer.
To determine the density of the liquid mixture, we need to consider the mass and volume of the liquids involved. Let's assume that the mass of each liquid is m and the density of the first liquid is ρ.
Since the mass of the first liquid is equal to the mass of the second liquid (m), the total mass of the mixture is 2m.
The volume of each liquid can be calculated using the density formula: density = mass/volume. Rearranging the formula, we have volume = mass/density.
For the first liquid, its volume is m/ρ.
For the second liquid, since its density is 2ρ, its volume is m/(2ρ).
When we mix the two liquids, the total volume remains unchanged. Therefore, the volume of the mixture is equal to the sum of the volumes of the individual liquids.
Volume of mixture = volume of first liquid + volume of second liquid
Volume of mixture = m/ρ + m/(2ρ)
Volume of mixture = (2m + m)/(2ρ)
Volume of mixture = 3m/(2ρ)
Now, to calculate the density of the mixture, we divide the total mass (2m) by the volume of the mixture (3m/(2ρ)).
Density of mixture = (2m) / (3m/(2ρ))
Density of mixture = 4ρ/3m
Since we know that the mass of the liquids cancels out, the density of the mixture simplifies to:
Density of mixture = 4ρ/3
Therefore, the density of the liquid mixture is 4/3ρ, which corresponds to option A.
To know more about the liquid mixture refer here,
https://brainly.com/question/30101907#
#SPJ11
Complete question :
A mass of a liquid of density ρ is thoroughly mixed with an equal mass of another liquid of density 2ρ. No change of the total volume occurs. What is the density of the liquid mixture? A. 4/3ρ B. 3/2ρ C. 5/3ρ D. 3ρ
A large fish tank has a volume of 6 m3 and a total mass of 20,000 kg. How dense is it?
The density of the large fish tank is 3,333.33 kg/m³.
Density is defined as the mass of an object divided by its volume. In this case, the mass of the fish tank is given as 20,000 kg, and the volume is 6 m³. By dividing the mass by the volume, we can calculate the density. Therefore, the density of the fish tank is 20,000 kg / 6 m³ = 3,333.33 kg/m³.
For more questions like Density click the link below:
brainly.com/question/17990467
#SPJ11
13 Select the correct answer. Which missing item would complete this alpha decay reaction? + He 257 100 Fm → OA. 29C1 253 98 B. 255 C. 253 D. 22th 904 O E. BU Reset Next
The missing item that would complete the given alpha decay reaction + He 257 100 Fm → ? is option C. 253.
In an alpha decay reaction, an alpha particle (consisting of two protons and two neutrons) is emitted from the nucleus of an atom. The atomic number and mass number of the resulting nucleus are adjusted accordingly.
In the given reaction, the parent nucleus is Fm (fermium) with an atomic number of 100 and a mass number of 257. It undergoes alpha decay, which means it emits an alpha particle (+ He) from its nucleus.
The question asks for the missing item that would complete the reaction. Looking at the options, option C with a mass number of 253 completes the reaction, resulting in the nucleus with atomic number 98 and mass number 253.
To learn more about alpha decay click here: brainly.com/question/27870937
#SPJ11
7. A 3 meter long wire carries a current of 5 A and is immersed within a uniform magnetic field B. When this wire lies along the +x axis (current in +x direction), a magnetic force 1 F₁ = (+9N1) acts on the wire, and when it lies on the +y axis (current in +y direction), the force is F₂ = (- 9N1). AA A Find the magnetic field B, expressing your answer in i, j, k notation.
The magnetic field B can be determined by analyzing the forces acting on the wire in different orientations. By considering the given forces and orientations, the magnetic field B is determined to be B = 3.6i - 3.6j + 0k T.
When the wire lies along the +x axis, a magnetic force F₁ = +9N₁ acts on the wire. Since the wire carries a current in the +x direction, we can use the right-hand rule to determine the direction of the magnetic field B. The force F₁ is directed in the -y direction, perpendicular to both the current and magnetic field, indicating that the magnetic field must point in the +z direction.
When the wire lies along the +y axis, a magnetic force F₂ = -9N₁ acts on the wire. Similarly, using the right-hand rule, we find that the force F₂ is directed in the -x direction. This implies that the magnetic field must be in the +z direction to satisfy the right-hand rule.
Since the magnetic field B has a z-component but no x- or y-components, we can express it as B = Bi + Bj + Bk. The forces F₁ and F₂ allow us to determine the magnitudes of the x- and y-components of B.
For the wire along the +x axis, the force F₁ is given by F₁ = qvB, where q is the charge, v is the velocity of charge carriers, and B is the magnetic field. The magnitude of F₁ is equal to qvB, and since the wire carries a current of 5 A, the magnitude of F₁ is given by 9N₁ = 5A * B, which leads to B = 1.8 N₁/A.
Similarly, for the wire along the +y axis, the force F₂ is given by F₂ = qvB, where q, v, and B are the same as before. The magnitude of F₂ is equal to qvB, and since the wire carries a current of 5 A, the magnitude of F₂ is given by 9N₁ = 5A * B, which leads to B = -1.8 N₁/A.
Combining the x- and y-components, we find that B = 1.8i - 1.8j + 0k N₁/A. Finally, since 1 T = 1 N₁/A·m, we can convert N₁/A to T and obtain the magnetic field B = 3.6i - 3.6j + 0k T.
Learn more about Magnetic Field here:
brainly.com/question/14848188
#SPJ11
In medical imaging discuss how to minimize risk to patients and
operating staff. Recommend the safe dose levels for both staff and
patients under treatment as provided the national regulatory
body.
To ensure safety in medical imaging, follow radiation protocols, maintain equipment, train staff, screen patients, obtain consent, implement quality assurance, and adhere to safe dose level guidelines.
In medical imaging, minimizing risks to patients and operating staff is of utmost importance. Here are some general strategies to minimize risks:
Equipment Safety: Ensure that imaging equipment is properly maintained, calibrated, and regularly inspected to minimize any potential malfunctions or hazards.Radiation Safety: Follow strict radiation safety protocols, including shielding measures and appropriate use of lead aprons, thyroid collars, and protective eyewear. Use the "As Low As Reasonably Achievable" (ALARA) principle to minimize radiation exposure for both patients and staff.Training and Education: Provide comprehensive training to the operating staff on radiation safety measures, proper handling of equipment, and adherence to safety protocols. Regularly update their knowledge and skills through continuing education programs.Patient Screening: Conduct thorough patient screening to identify any potential contraindications or risks associated with the imaging procedure, such as pregnancy, allergies, or pre-existing medical conditions.Informed Consent: Obtain informed consent from patients, ensuring they are aware of the risks and benefits associated with the imaging procedure.Quality Assurance: Implement rigorous quality assurance programs to monitor and optimize imaging processes, including regular audits, performance evaluations, and maintenance of accurate documentation.As for the safe dose levels, these are typically regulated by national bodies such as the Food and Drug Administration (FDA) in the United States or equivalent regulatory authorities in other countries. Safe dose levels depend on the specific imaging modality (e.g., X-ray, CT scan, MRI) and the specific procedure being performed. It is crucial to follow the guidelines and recommendations provided by the regulatory body in each respective country to ensure the safety of both patients and staff.
It is important to note that specific safe dose levels may vary depending on factors such as age, weight, and individual patient circumstances. It is the responsibility of the healthcare provider to assess each patient's needs and follow the appropriate guidelines to ensure safe and effective imaging procedures.
To learn more about Food and Drug Administration (FDA), Visit:
https://brainly.com/question/1241693
#SPJ11
show cordinate system
Three 0.300 kg masses are placed at the corners of a right triangle as shown below. The sides of the triangle are of lengths a 0.400 m, b -0.300 m, and c-0.500 m. Calculate the magnitude and direction
The magnitude of the resulting force is sqrt(2)* m* g, and its direction is 45 degrees.
We can use vector addition to determine the strength and direction of the resultant force at the origin (the center of the triangle).
For the moment, assume that side a of the triangle is horizontal, and side b is vertical.
We must first enumerate the individual forces that the public is exerting. The gravitational force exerted by each mass is defined by the equation F = m * g, where m is the mass and g is the acceleration due to gravity (about [tex]9.8 m/s^2[/tex]).
The force components for mass 1 (at the origin) are Fx1 = 0 and Fy1 = 0.
The force components for mass 2 (placed at the end of side a) are: Fx2 = -m * g Fy2 = 0.
The force components for mass 3 (at the end of side b) are: Fx3 = 0 Fy3 = -m * g
We can add the force components to determine the resultant force as follows:
Fx = Fx1 + Fx2 + Fx3
Fy = Fy1 + Fy2 + Fy3
Substituting the values, we have:
Fx = 0 + (-m * g) + 0 = -m * g
Fy = 0 + 0 + (-m * g) = -m * g
The Pythagorean theorem can be used to determine the magnitude of the resultant force:
Magnitude = [tex]sqrt(Fx^2 + Fy^2)\\= sqrt[(-m * g)^2 + (-m * g)^2]\\= sqrt[2 * (m * g)^2]\\= sqrt(2) * m * g[/tex]
The direction of the resulting force can be calculated using trigonometry:
Direction = atan(Fy / Fx)
= atan((-m * g) / (-m * g))
= atan(1)
= 45 degrees (Assuming that positive angles are those measured in the direction opposite to the positive x-axis)
Therefore, the magnitude of the resulting force is sqrt(2)* m* g, and its direction is 45 degrees.
Learn more about Force, here:
https://brainly.com/question/30507236
#SPJ4
Part A Green light ( = 504 nm) strikes a single slit at normal incidence. What width slit will produce a central maximum that is 2.50 cm wide on a screen 1.80 m from the slit? Express your answer to three significant figures. VO AO ΑΣΦ ? W = um Submit Request Answer
The width of the single slit required to produce a central maximum that is 2.50 cm wide on a screen 1.80 m from the slit is 0.036 um.
Given data: The wavelength of green light = 504 nm, Distance between the screen and the single slit = 1.80 m, Width of the central maximum = 2.50 cm = 2.50 × 10⁻² m, Width of the single slit = ?
The formula for the width of the single slit that will produce a central maximum is given by: W = λD/d Where, λ is the wavelength of the light, D is the distance between the slit and the screen and d is the width of the single slit
By putting the given values in the formula, we get: W = λD/d
⇒ d = λD/W
⇒ d = (504 × 10⁻⁹ m) × (1.80 m) / (2.50 × 10⁻² m)
⇒ d = 0.036288 m
≈ 0.036 um (rounded off to three significant figures).
Therefore, the width of the single slit required to produce a central maximum that is 2.50 cm wide on a screen 1.80 m from the slit is 0.036 um (rounded off to three significant figures).
So, The width of the single slit required to produce a central maximum that is 2.50 cm wide on a screen 1.80 m from the slit is 0.036 um.
To know more about single slit, refer
https://brainly.com/question/24305019
#SPJ11
For a particular RL.C parallel circuit connected to an AC voltage source, the capacitive reactance is 13.96 S, the inductive
reactance is 24.3 S2, and the maximum voltage across the 75.9-S resistor is 14.5 V. What is the total current in the circuit?
Using the impedance triangle method, the total impedance of a parallel RL.C circuit was calculated to be 77.67 Ω. The maximum current in the circuit was calculated to be approximately 0.1865 A given the value of the maximum voltage across the resistor.
To solve this problem, we can use the impedance triangle method for a parallel RL.C circuit.
The total impedance Z of the circuit can be calculated as follows:
Z = sqrt((R-XC)^2 + XL^2)
Substituting the given values, we get:
Z = sqrt((75.9 - 13.96)^2 + 24.3^2)
Z = 77.67 Ω
The maximum current I in the circuit can be calculated using Ohm's law:
I = V_max / Z
Substituting the given values, we get:
I = 14.5 V / 77.67 Ω
I = 0.1865 A
Therefore, the total current in the parallel RL.C circuit is approximately 0.1865 A.
To know more about impedance, visit:
brainly.com/question/2263607
#SPJ11
I am currently working on a project about producing electricity using solar energy, heating elements and water, and need to calculate how many elements I need, to make sure that my water heater can withstand high amounts of sun rays. assuming that each heat element can utilize about 3 KW of solar energy without getting damaged, how can I calculate the proper amount of heating elements needed in order to warm up 90 000 litres of water every day from 20 to 70 degrees celcius, while making sure that my device has enough heating elements to not overheat and get damaged? are there any other factors i need to take into consideration?
This means that 6,207 heating elements are required to warm up 90,000 liters of water every day from 20 to 70 degrees Celsius.
Solar energy is the energy generated from the sun that can be used as an alternative source of electricity production. The generation of electricity from solar energy involves the use of solar panels, which absorb sunlight and convert it into electricity. This electricity is stored in batteries for later use.
Solar water heaters work by absorbing sunlight and converting it into heat energy, which is used to warm water. The water is stored in an insulated tank, which can be used for domestic or industrial purposes.
Heat energy = mCΔt, where m = mass of water, C = specific heat capacity of water, and Δt = temperature difference of the water.The specific heat capacity of water is 4.186 J/g°C.
Therefore, the energy required to heat up 90,000 liters of water by 50°C is:Q = mCΔt = 90,000 kg x 4.186 J/g°C x 50°C = 18,619,700 kJ.To heat up 90,000 liters of water by 50°C, a total of 18,619,700 kJ of energy is required.
Since each heat element can utilize about 3 kW of solar energy without getting damaged, the number of heat elements required is:
Number of heat elements = Total energy required / Energy per heat elementNumber of heat elements = 18,619,700 kJ / 3 kW = 6,206.5667 heat elementsSince the number of heat elements must be a whole number, it can be rounded up to 6,207 heat elements.
This means that 6,207 heating elements are required to warm up 90,000 liters of water every day from 20 to 70 degrees Celsius.
Consider heating element and solar energy conversion efficiency, insulation to minimize heat loss, assess solar radiation availability, implement temperature control and safety mechanisms, account for water flow rate, and plan for system scalability.along with the calculations provided, you can design a solar water heating system that efficiently and effectively meets your desired water heating needs while ensuring the longevity and safety of the system.
Learn more about heating elements at: https://brainly.com/question/29284313
#SPJ11
A transformer changes the voltage from 110 VAC to 426 VAC. If the original current is 5 A, what is the output current?
Given a transformer that converts the voltage from 110 VAC to 426 VAC and an input current of 5 A, we need to determine the output current. The output current can be calculated using the transformer's voltage and current ratio, which is defined by the turn ratio of the transformer.
To determine the output current, we can use the voltage and current ratio of the transformer, which is defined as the ratio of the output voltage to the input voltage is equal to the ratio of the output current to the input current. Mathematically, this can be expressed as V_out / V_in = I_out / I_in. Rearranging the equation, we can find the output current (I_out) by multiplying the input current (I_in) with the ratio of the output voltage (V_out) to the input voltage (V_in). In this case, the output current would be (426 V / 110 V) * 5 A, which results in an output current of approximately 19.5 A.
Learn more about current here: brainly.com/question/1100341
#SPJ11
Different situation now. You re out in space, on a rotating wheel-shaped space station of radius 557 m. You feel planted firmly on the floor, due to artificial gravity. The gravity you experience is Earth-normal, that is, g -9.81 m/s^2. How fast is the space station rotating in order to produce this much artificial gravity? Express your answer in revolutions per minute (rpm). О 0.133 rpm 73.9 rpm 0.887 rpm 1.267 rpm
The space station is rotating at approximately 0.887 rpm to produce Earth-normal artificial gravity.
To calculate the speed of the space station rotating to produce Earth-normal artificial gravity, we can use the centripetal acceleration formula:
ac = ω²r
where ac is the centripetal acceleration, ω is the angular velocity, and r is the radius of the space station.
We know that ac is equal to the acceleration due to gravity (g). Substituting the given values, we have:
g = ω²r
Solving for ω, we get:
ω = sqrt(g / r)
Plugging in the values:
g = 9.81 m/s²
r = 557 m
ω = sqrt(9.81 / 557) ≈ 0.166 rad/s
To convert this angular velocity to revolutions per minute (rpm), we can use the conversion factor of 1 revolution = 2π radians, and there are 60 seconds in a minute:
ω_rpm = (0.166 rad/s) * (1 revolution / 2π rad) * (60 s / 1 min) ≈ 0.887 rpm
To know more about space station refer to-
https://brainly.com/question/14547200
#SPJ11
A metal cylindrical wire of radius of 1.5 mm and length 4.7 m has a resistance of 2Ω. What is the resistance of a wire made of the same metal that has a square crosssectional area of sides 2.0 mm and length 4.7 m ? (in Ohms)
The resistance of a wire is given by the formula:
R = (ρ * L) / A
where R is the resistance, ρ is the resistivity of the material, L is the length of the wire, and A is the cross-sectional area of the wire.
In this case, the first wire has a cylindrical shape with a radius of 1.5 mm, so its cross-sectional area can be calculated as:
A1 = π * (1.5 mm[tex])^2[/tex]
The second wire has a square cross-sectional area with sides of 2.0 mm, so its area can be calculated as:
A2 = (2.0 mm[tex])^2[/tex]
Given that the length of both wires is 4.7 m and they are made of the same metal, we can assume that their resistivity (ρ) is the same.
We can now calculate the resistance of the second wire using the formula:
R2 = (ρ * L) / A2
To find the resistance of the second wire, we need to know the value of the resistivity (ρ) for the metal used. Without that information, we cannot provide a numerical answer.
To know more about resistance refer to-
https://brainly.com/question/29427458
#SPJ11
Two charges are located on the x axis: 91 = +4.9 µC at x₁ = +4.9 cm, and q2 = +4.9 μC at x2 = -4.9 cm. Two other charges are located on the y axis: 93 +3.6 μC at y3 = +5.4 cm, and 94 = -11 μC at y4=+7.0 cm. Find (a) the magnitude and (b) the direction of the net electric field at the origin.
(a) The magnitude of the net electric field at the origin is approximately 1.32 x 10^6 N/C.(b) The direction of the net electric field at the origin is towards the negative x-axis.
To find the net electric field at the origin, we need to calculate the electric field contributions from each of the charges and then add them vectorially. The electric field due to a point charge is given by Coulomb's Law:
E = k * (q / r^2)
where E is the electric field, k is the electrostatic constant (k = 8.99 x 10^9 N m^2/C^2), q is the charge, and r is the distance between the charge and the point where the electric field is being calculated.Let's calculate the electric field contributions from each charge and then combine them:
Charge 1 (q1 = +4.9 µC) at x1 = +4.9 cm:
r1 = √((0 - x1)^2) = √((0 - 4.9 cm)^2) = 4.9 cm = 0.049 m
E1 = k * (q1 / r1^2) = (8.99 x 10^9 N m^2/C^2) * (4.9 x 10^-6 C / (0.049 m)^2) = 898000 N/C
Charge 2 (q2 = +4.9 µC) at x2 = -4.9 cm:
r2 = √((0 - x2)^2) = √((0 + 4.9 cm)^2) = 4.9 cm = 0.049 m
E2 = k * (q2 / r2^2) = (8.99 x 10^9 N m^2/C^2) * (4.9 x 10^-6 C / (0.049 m)^2) = 898000 N/C
Charge 3 (q3 = +3.6 µC) at y3 = +5.4 cm:
r3 = √((0 - y3)^2) = √((0 - 5.4 cm)^2) = 5.4 cm = 0.054 m
E3 = k * (q3 / r3^2) = (8.99 x 10^9 N m^2/C^2) * (3.6 x 10^-6 C / (0.054 m)^2) = 148000 N/C
Charge 4 (q4 = -11 µC) at y4 = +7.0 cm:
r4 = √((0 - y4)^2) = √((0 - 7.0 cm)^2) = 7.0 cm = 0.07 m
E4 = k * (q4 / r4^2) = (8.99 x 10^9 N m^2/C^2) * (-11 x 10^-6 C / (0.07 m)^2) = -170000 N/C
Now, we can add the electric fields vectorially. Since the electric field is a vector, we need to consider both magnitude and direction.
Magnitude of the net electric field:
|E_net| = √(E1^2 + E2^2 + E3^2 + E4^2)
|E_net| = √((898000 N/C)^2 + (898000 N/C)^2 + (148000 N/C)^2 + (-170000 N/C)^2)
|E_net| ≈ 1.32 x 10^6 N/C
Direction of the net electric field:
The direction of the net electric field can be determined by considering the x and y components of the individual electric fields.
To learn more about Coulomb's law, click here:
https://brainly.com/question/506926
#SPJ11
Your 300 mL cup of coffee is too hot to drink when served at 90.0 °C. What is the mass of an ice cube, taken from a -23.0 °C freezer, that will cool your coffee to a pleasant 64.0°?
The mass of the ice cube that will cool the coffee to a pleasant 64.0°C is 22.5 g.
Given :
Initial temperature of coffee, T1 = 90.0 °C
Final temperature of coffee, T2 = 64.0°C
Initial temperature of ice, T3 = -23.0 °C
Volume of coffee, V1 = 300mL
To find : Mass of ice, m
We know that the heat gained by ice = Heat lost by coffee
Change in temperature of coffee, ΔT1 = T1 - T2 = 90.0 - 64.0 = 26°C
Change in temperature of ice, ΔT2 = T1 - T3 = 90.0 - (-23.0) = 113°C
The heat gained by ice, Q1 = m × s × ΔT2 ....(1)
The heat lost by coffee, Q2 = m × s × ΔT1 ....(2)
where s is the specific heat capacity of water = 4.18 J/g °C.
So equating (1) and (2) we get :
m × s × ΔT2 = m × s × ΔT1
⇒ m = (m × s × ΔT1) / (s × ΔT2)
⇒ m = (300 × 4.18 × 26) / (4.18 × 113)
⇒ m = 22.5g
Therefore, the mass of the ice cube that will cool the coffee to a pleasant 64.0°C is 22.5 g.
To learn more about specific heat capacity :
https://brainly.com/question/29792498
#SPJ11
A space traveller weighs herself on earth at a location where the acceleration due to gravity is 9.83 m/s29.83 m/s2 and finds a value of 525 n.525 n. what is her mass ?
The mass of the space traveler is approximately 53.42 kg.
The weight of an object is the force exerted on it by gravity, while mass is the measure of the amount of matter in an object. The weight of an object can be calculated using the formula:
Weight = Mass x Acceleration due to gravity
In this case, the weight of the space traveler on Earth is given as 525 N and the acceleration due to gravity on Earth is 9.83 m/s^2.
To find the mass of the space traveler, we can rearrange the formula:
Mass = Weight / Acceleration due to gravity
Substituting the given values, we have:
Mass = 525 N / 9.83 m/s^2
Simplifying this calculation, we get:
Mass ≈ 53.42 kg
Therefore, the mass of the space traveler is approximately 53.42 kg.
to know more about acceleration here:
brainly.com/question/2303856
#SPJ11
11. (13 points) A mirror has a focal length of f= -50.0cm. An object is placed 80.0cm from the mirror. a. Is the mirror concave or convex? b. What is the image distance? (Include the + or -sign.) c. What is the magnification? (Include the + or -sign.) d. Is the image real or virtual? e. Is the image upright or inverted?
a) The given mirror has a focal length of f= -50.0 cm and the object is placed at a distance of 80.0 cm from the mirror. As the distance between the object and the mirror is greater than the focal length of the mirror, the given mirror is a concave mirror.
b) The mirror formula is given by :
`1/v - 1/u = 1/f`
Where, v is the image distance, u is the object distance and f is the focal length of the mirror. The object distance is given as u= -80.0 cm (as the object is placed at a distance of 80.0 cm from the mirror) and f= -50.0 cm (as given in the question).Therefore, putting these values in the mirror formula:
1/v + 1/80.0 = 1/-50.01/v = -0.025v = -40.0 cm
The image distance is v= -40.0 cm.
c) The magnification of the mirror is given by:
Magnification(m) = -v/u
Where,v is the image distance and u is the object distance
[tex]M = -(-40.0)/(-80.0)M = 0.5 (positive value)[/tex]
Therefore, the magnification is 0.5 (positive)
d) As the image distance is negative (-40.0 cm), therefore the image is formed behind the mirror. Hence, the image formed is a real image.
e) The magnification of the image is positive (+0.5) therefore, the image formed will be upright.
So, the answer for the given question are as follows:
a) The mirror is concave.
b) The image distance is v= -40.0 cm. c) The magnification is 0.5 (positive)
d) The image formed is real.
e) The image formed is upright.
To know more about mirror visit:
https://brainly.com/question/1160148
#SPJ11