Explanation:
here, u = 5m/s,a = 3m/s2, v = 23m/s, t = ?, s = ?
v = u+at
23 = 5 + 3t
t = 23- 5/3 = 18/3 = 6 sec
s= ut + 1/2 at ^2
s = 5 * 6 + 1/2 * 3 * (6)^2
s = 30 + 1/2 * 3 * 36
s = 30 + 18 * 3
s= 30 + 54 = 84 m
here, u = 0, a = x, t = 5min = 300 sec, s= 5.8km = 5800m
s = ut + 1/2 at^2
5800 = 0 * 300 + 1/2 * x * (300)^2
5800 = 1/2 * x * 90000
5800= 45000 x
x = 5800/45000
x = 0.12m/sec^2
here, v = 0, t = 6sec, s = ?, a = - 9.8m/s2
s = UT + 1/2 at ^2
s = 29.4 * 3 + 1/2 * - 9.8 * (3)^2
s= 88.2 - 44.1
s= 44.1 m
s = ut + 1/2 at ^2
s = 0 * 1 + 1*2 * 9.8 * (1)^2
s = 4.9m
hope it helps you
A 0N
B 6N
C 10 N
D 12 N
Answer:
The net force acting on the object is 0 N
Explanation:
Newton's Second Law of Forces
The net force acting on a body is proportional to the mass of the object and its acceleration.
The net force can be calculated as the sum of all the force vectors in each rectangular coordinate separately.
The image shows a free body diagram where four forces are acting: two in the vertical direction and two in the horizontal direction.
Note the forces in the vertical direction have the same magnitude and opposite directions, thus the net force is zero in that direction.
Since we are given the acceleration a =0, the net force is also 0, thus the horizontal forces should be in equilibrium.
The applied force of Fapp=10 N is compensated by the friction force whose value is, necessarily Fr=10 N in the opposite direction.
The net force acting on the object is 0 N
Was the cannonball able to hit its target of 50 meters when the initial velocity was 20 m/s? Why?/Why Not?
(was not able to hit the target, but I don't know the reason)
Answer:
The cannon ball was not able to hit the target because the target is located at a height of 50 m whereas the cannon ball was only above to get to a height of 20 m.
Explanation:
From the question given above, the following data were obtained:
Height to which the target is located = 50 m
Initial velocity (u) = 20 m/s
To know whether or not the cannon ball is able to hit the target, we shall determine the maximum height to which the cannon ball attained. This can be obtained as follow:
Initial velocity (u) = 20 m/s
Final velocity (v) = 0 (at maximum height)
Acceleration due to gravity (g) = 10 m/s²
Maximum height (h) =?
v² = u² – 2gh (since the ball is going against gravity)
0² = 20² – (2 × 10 × h)
0 = 400 – 20h
Collect like terms
0 – 400 = – 20h
– 400 = – 20h
Divide both side by – 20
h = – 400 / – 20
h = 20 m
Thus, the the maximum height to which the cannon ball attained is 20 m.
From the calculations made above, we can conclude that the cannon ball was not able to hit the target because the target is located at a height of 50 m whereas the cannon ball was only above to get to a height of 20 m.
An incidence that is caused by sleep and also occurs during sleep is known as a __________.
Answer:
parasomnia
Explanation:
Sometimes you can see a faint reflection in the surface of a shiny plate or cup.Why ?
Answer:
The degree of reflection whether faint or bright you see on the surface of an object is an indication that light particles had hit the surface. Since light is a wave and as part of its characteristics can get reflected. However, the amount of light reflected by a surface is dependent on the smoothness of the surface which can be shiny or dull, it can also be dependent on the nature of the surface which can be glass, water, and so on. So, from the question, you can see a faint reflection on the surface of a shiny plate or cup because of the smoothness of the surface which reflects the lights that hit it from a particular direction at the same angle.
Choose the element that has the larger atomic radius: francium or sodium.
Answer:
Francium.
I hope it will be useful.
How is an emulsion different from other colloids?
The difference between colloid and emulsion is that a colloid can form when any state of matter (solid, liquid or gas) combine with a liquid whereas an emulsion has two liquid components which are immiscible with each other.
Answer:
wrthfnhdghkyulyf
Explanation:
zdfhdfhghdhddddddddddddddddddddd
If an elevator is moving at a speed of 5 m/s and the person in it is 82 kg what is the person’s kinetic energy?
Answer:
KE 1025J
[tex] \frac{1}{2} m {v}^{2} \\ [/tex]
Explanation:
[tex] \frac{1}{2} \times 82 \times {5}^{2} [/tex]
1025J
Longitudinal seismic waves are known as
a primary waves.
b. secondary waves.
surface waves.
d. transverse waves.
Please select the best answer from the choices provided
О А
ОВ
ОС
D
Answer:
A. primary waves
Explanation:
12. A rolling ball has 18 J of kinetic energy and is rolling 3.0 m/s. Find its mass.
Answer:
4g
I hope it will be useful.
Explanation:
KE = (1/2)*m*v^2
1. Which of the following is an example of projectile motion?
An elevator
Ajet taking off
O A football flying through the air
Dropping an aluminum can into the garbage
Answer:
A football flying through the air
Explanation:
when an object has projectile motion it is moving through the air
From the given options, the football flying through the air is the prime example of projectile motion. (option d)
Projectile motion refers to the motion of an object that is launched into the air and moves under the influence of gravity alone. It follows a curved path known as a projectile trajectory. Among the options provided, the example that best represents projectile motion is a football flying through the air.
When a football is kicked or thrown, it experiences an initial force that propels it forward. However, as soon as it leaves the kicker's or thrower's hand or foot, the only force acting on it is gravity. Gravity pulls the football downward, causing it to follow a curved path. The shape of the path depends on the angle at which the football is launched and its initial velocity.
During its flight, the football follows a parabolic trajectory, moving both horizontally and vertically. The horizontal component of its motion remains constant, while the vertical component experiences a downward acceleration due to gravity. This combination of horizontal and vertical motion creates the characteristic curved path of projectile motion.
Therefore, option (d) is correct.
To know more about projectile motion here
https://brainly.com/question/12860905
#SPJ6
Which of the following is true about thoughts
Answer:
they can be unpredictable until you think it
Explanation:
Free electromagnetic oscillations occur in an electrical circuit. Knowing the characteristic dimensions of the elements, L=20mH și C=0,005mF, determine: a)The period of free electromagnetic oscillations: b)Frequency of free electromagnetic oscillations: c)Electromagnetic energy in the circuit when the maximum value of the current intensity is equal to 100 mA.
Answer:
a. 0.199 ms b. 5.03 kHz c. 0.1 mJ
Explanation:
a. The period of oscillation of an L-C circuit is T = 2π√(LC) where L = inductance = 20 mH = 20 × 10⁻³ H and C = capacitance = 0.005 mF = 5 × 10⁻⁶ F.
So, T = 2π√(LC)
= 2π√(20 × 10⁻³ H × 5 × 10⁻⁶ F)
= 2π√(100 × 10⁻¹¹)
= 2π√(10 × 10⁻¹⁰)
= 2π(3.16 × 10⁻⁵)
= 19.87 × 10⁻⁵
= 1.987 × 10⁻⁴ s
= 1.99 × 10⁻⁴ s
= 0.199 × 10⁻³ s
= 0.199 ms
b. frequency , f = 1/T where T = period = 0.199 × 10⁻³ s.
So, f = 1/0.199 × 10⁻³ s
= 5.03 × 10³ Hz
= 5.03 kHz
c. The electromagnetic energy E = 1/2Li² where L = inductance = 20 × 10⁻³ H and i = current = 100 mA = 0.1 A
So, E = 1/2Li²
= 1/2 × 20 × 10⁻³ H × (0.1 A)²
= 0.1 × 10⁻³ J
= 0.1 mJ
calculate the magnitude of the net force on a 4.5 kg mass if the mass moves straight up at constant speed
Answer:
0
Explanation:
as Newton 1st Law said that every object will remain at rest or in uniform motion (constant speed) in a straight line unless compelled to change its state by the action of an external force
Net Force = 0
pls I will give brainliest for correct answer
find the distance travelled im the first 8 hours
Answer
I think it is 112 havent done this in a while but im pretty sure thats it Good luck
Explanation:
Standing waves are created in the four strings shown in Figure 25. All strings have the same mass per unit length and are under the same tension The lengths of the strings are given. Rank the frequencies of the oscillations, from largest to smallest
Answer:
The rank of the frequencies from largest to smallest is
The largest frequency of oscillation is given by the string in option D
The second largest frequency of oscillation is given by the string in option B
The third largest frequency of oscillation is given by the string in option A
The smallest frequency of oscillation is given by the string in option C
Explanation:
The given parameters are;
The mass per unit length of all string, m/L = Constant
The tension of all the string, T = Constant
The frequency of oscillation, f, of a string is given as follows;
[tex]f = \dfrac{(n + 1) \times \sqrt{\dfrac{T}{m/L} } }{2 \cdot L}[/tex]
Where;
T = The tension in the string
m = The mass of the string
L = The length of the string
n = The number of overtones
[tex]Therefore, \ {\sqrt{\dfrac{T}{m/L} } } = Constant \ for \ all \ strings = K[/tex]
For the string in option A, the length, L = 27 cm, n = 3 we have;
[tex]f_A = \dfrac{(n + 1) \times \sqrt{\dfrac{T}{m/L} } }{2 \cdot L} = \dfrac{(3 + 1) \times K }{2 \times 27} = \dfrac{2 \times K}{27} \approx 0.07407 \cdot K[/tex]
For the string in option B, the length, L = 30 cm, n = 4 we have;
[tex]f_B = \dfrac{(n + 1) \times \sqrt{\dfrac{T}{m/L} } }{2 \cdot L} = \dfrac{(4 + 1) \times K }{2 \times 30} = \dfrac{ K}{12} \approx 0.08 \overline 3\cdot K[/tex]
For the string in option C, the length, L = 30 cm, n = 3 we have;
[tex]f_C = \dfrac{(n + 1) \times \sqrt{\dfrac{T}{m/L} } }{2 \cdot L} = \dfrac{(3 + 1) \times K }{2 \times 30} = \dfrac{K}{15} \approx 0.0 \overline 6 \cdot K[/tex]
For the string in option D, the length, L = 24 cm, n = 4 we have;
[tex]f_D = \dfrac{(n + 1) \times \sqrt{\dfrac{T}{m/L} } }{2 \cdot L} = \dfrac{(4 + 1) \times K }{2 \times 24} = \dfrac{5 \times K}{48} \approx 0.1041 \overline 6 \cdot K[/tex]
Therefore, we have the rank of the frequency of oscillations of th strings from largest to smallest given as follows;
1 ) [tex]f_D[/tex] 2) [tex]f_B[/tex] 3) [tex]f_A[/tex] 4) [tex]f_C[/tex]
The order of the frequencies is [tex]f_D>f_B>f_A>f_C[/tex]
Standing waves:The frequency of the standing wave in a string tied at both ends is given by:
[tex]f=\frac{nv}{2L}[/tex]
where n is the mode of frequency
v is the velocity of the wave
and L is the length of the string.
Now the velocity of a wave in a string tied at both ends is given by
[tex]v=\sqrt{\frac{T}{\mu}}[/tex]
where T is the tension and μ is the mass per unit length.
Since T and μ are the same for all the strings, velocity [tex]v[/tex] will be the same for all.
Now to find the mode of frequency we can calculate the number of nodes (including the nodes at the ends) in the given figure and subtract by 1. Nodes are the point where the amplitude of the wave is zero.
[tex]f_A=\frac{3v}{2\times27}=\frac{v}{18}\;s^{-1}\\\\f_B=\frac{4v}{2\times30}=\frac{v}{15}\;s^{-1}\\\\f_C=\frac{3v}{2\times30}=\frac{v}{20}\;s^{-1}\\\\f_D=\frac{4v}{2\times24}= \frac{v}{12}\;s^{-1}[/tex]
Hence, [tex]f_D>f_B>f_A>f_C[/tex]
Learn more about standing waves:
https://brainly.com/question/1698005?referrer=searchResults
A cart is moving at 55 m/s at an angle of 25° to the ground. Determine the horizontal component.
Answer:
The horizontal component of the velocity is 49.85 m/s.
Explanation:
Rectangular Components of a Vector
A 2D vector can be expressed in several forms. The rectangular form gives its two components, one for each axis (x,y). The polar form gives the components as the pair (r,θ) being r the magnitude and θ the angle.
When the magnitude and angle of the vector are given, the rectangular components are calculated as follows:
[tex]v_x=v\cos\theta[/tex]
[tex]v_y=v\sin\theta[/tex]
Where v is the magnitude of the vector and θ is the angle with respect to the x positive direction.
The cart is moving at v=55 m/s at θ=25°, thus:
[tex]v_x=55\cos 25^\circ[/tex]
[tex]v_x=49.85\ m/s[/tex]
The horizontal component of the velocity is 49.85 m/s.
3. A boat at sea is being moved by the ocean current at 5 metres/minute directly to the east. At the same time it is being moved directly to
the north at 3 metres/minute by a strong wind. Determine the magnitude and direction of the boat's overall velocity.
Explanation:
A boat at sea is being moved by the ocean current at 5 metres/minute directly to the east.
At the same time, it is being moved directly to the north at 3 metres/minute by a strong wind.
We need to find the magnitude and direction of the boat's overall velocity.
As both velocities are moving perpendicular to each other. The resultant velocity is given by :
[tex]v=\sqrt{5^2+3^2} \\\\=\sqrt{25}\\\\=5\ \text{metres/minute}[/tex]
For direction,
[tex]\tan\theta=\dfrac{v_y}{v_x}\\\\=\dfrac{3}5{}\\\\\theta=\tan^{-1}(\dfrac{3}5{})\\\\=30.96^{\circ}[/tex]
Hence, this is the required solutin.
How will you show that metals form basic oxides?
Answer:
when Metallic oxide reacts with water they form metallic hydroxide which are basic in nature
If red and blue light rays fall with the same angle of incidence on the separating
surface between two different transparent media, then the ratio between the refraction
angle of the red light and the refraction angle of the blue light (.) is
a) greater than 1
b)equal to 1
c )indeterminable
d)less than 1
Answer:
I'm gonna say it's D
Explanation:
but when u do the experiment on in u head you'll actually find out that it is actually , indeterminable
Chef Andy tosses an orange in the air, then catches it again at the same height. The orange is in the air for 0.75\,\text s0.75s0, point, 75, start text, s, end text. We can ignore air resistance.
What was the orange's velocity at the moment it was tossed into the air?
Answer:
90.82%digrash silsho
concave lens has negative focal length why
I'll give brainliest....
. a train starts from rest and moves with a uniform acceleration of x metre per second square for 5 minutes determine the value of x if it covers a distance of 5.8 km during the journey
Answer:
x = ~0.1289 m/s^2
Explanation:
We can use one of the kinematic formulas. We see that the equation doesn’t contain the final velocity, so we use the kinematic equation d = v_0t + (1/2)at^2.
Since the train started from rest, the initial velocity, v_0, is 0. Thus, the equation becomes:
d = (1/2)at^2
Note that 5 minutes is 300 seconds and 5.8 km is 5800 m. Substituting the values we are given, we get:
5800 m = (1/2)(x m/s^2)(300 s)^2 = (45000 s^2)(x m/s^2)
Dividing by 45,000 on both sides, we get:
x = ~0.1289 m/s^2
I hope this helps! :)
Can you please help me with this physics question
Answer:
See the answers below
Explanation:
We can solve both problems using vector sum.
a)
Let's assume the forces that help the diver dive as positive downward, and the forces that oppose upward, as negative
[tex]F_{resultant}=100+30-85+900\\F_{resultant}=845[N][/tex]
The drag force is horizontal d this way in the horizontal direction we will only have the drag force that produces the water stream.
[tex]F_{drag}=50[N][/tex]
b)
Let's assume the forces that propel the rocket upwards as positive and forces like the weight of the rocket and other elements as negative forces.
[tex]F_{resultant}=960+7080-7700\\F_{resultant}=340 [kN][/tex]
The most common elements in the Earth’s crust are rarely found on their own. They are usually found combined. Suggest why this is.
Answer:
Because there are other elements that get in touch with it. And over time with, evolution, erosion and temperature their particles tend to mix. So what once was very common became mixed over time.
The most common element throughout the Earth’s crust that are rarely found on their own will be "Astatine".
Astatine seems to be the very most uncommon or infrequent natural substance throughout Earth's crust that occurs just under 1 gram at any time.It's indeed exceedingly impossible to make Astatine-210, particularly in perhaps the most useful state, don't just in less and less astatine present in the fundamental natural world.
Thus the above answer is correct.
Learn more about Astatine here:
https://brainly.com/question/1919540
if a truck has the mass of 2,000 kilometres and a velocity of 35 m/s, what is the momentum
Answer:
70,000 kg.m/sExplanation:
The momentum of an object can be found by using the formula
momentum = mass × velocity
From the question we have
momentum = 2000 × 35
We have the final answer as
70,000 kg.m/sHope this helps you
marked as brainiest if correct
Answer:
I think the the answer is creating and layout and template style ( C )
Explanation:
I did it before and i was checking my notes and i wrote that down , Hope this Helps :)
When the mallet hits the ball with an action force, the ball exerts a reaction 1 force on the mallet as explained by: 1) Newton's first law 2) Newton's second law 3) Newton's third law 4) all three of Newton's laws
Answer:
It's Newton's third law. For every known reaction, there is a equal and opposite reaction.
Explanation:
The mallet which hits the ball with an action force, the ball exerts a reaction force on the mallet as explained by the Newton's third law. Thus, the correct option is 3.
What is the Newton's third law?Newton's third law states that for every action (force) in nature there is an equal and opposite force or reaction. An example of third law of motion is that the mallet hits the ball with an action force, then the ball exerts a reaction.
If an object A exerts a force on the object B, then object B must also exert a force of equal magnitude and in the opposite direction back on object A. The law represents a certain symmetry in the nature that the forces always occur in pairs, and one body cannot exert a force on another without experiencing any kind of force itself.
Therefore, the correct option is 3.
Learn more about Newton's third law here:
https://brainly.com/question/29768600
#SPJ2
calculate the resistance of a wire 150cm long and diameter 2.0mm constructed from an alloy of resistivity 44*10-⁸Ωm
Answer:
R = 0.21 Ω
Explanation:
the formula:
R = r x l/A
R = (44 x 10-⁸ Ωm) x 1.5 / (π x (1 x 10-³ m)²)
R = 6.6 x 10-⁷ / 3.14 x 10-⁶
R = 0.21 Ω
The diagram shows a state of matter in a closed system before and after undergoing a
change.
System before change
System after change
SEE
Which statement best explains the change in the system?
Particle motion decreases when thermal energy is added to the system
O Particle motion increases when solid particles are added to the system.
O Particle motion increases when thermal energy is added to the system.
O Particle motion decreases when gas particles are added to the system.
Answer:
the second one
Explanation:
Particle motion increases when solid particles are added to the system.
What is horizontal motion
Horizontal motion is defined as a projectile motion in a horizontal plane depending upon the force acting on it. For a short distance, the vertical and horizontal components of a projectile are perpendicular and independent of each other.
Answer:
A projectile moves along its path with a constant horizontal velocity